• 한국구조물진단유지관리공학회 논문집
• /
• 제23권6호
• /
• pp.61-69
• /
• 2019

본 연구에서는 단일강섬유와 하이브리드강섬유로 보강된 UHPC의 휨강도 및 연성을 평가하기 위해 세 개의 휨파괴형 보에 대한 4점 가력 실험을 수행하였다. 실험 결과 단일섬유로 보강된 UHPC보다 하이브리드 섬유로 보강된 UHPC가 강도 및 연성 모든 측면에서 더 우수한 구조성능을 보유한 것으로 나타났다. 설계시의 안전성에 대해 평가하기 위하여, K-UHPC 구조설계지침에서 제공하는 방법에 따라 실험체의 강도와 연성을 평가해본 결과 현재의 재료모델은 강도에 대해서는 보수적으로 평가할 수 있으나 연성에 대해서는 과대평가하는 것으로 나타났다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1371-1375
• /
• 2005

The paper has analyzed the influence of tire design variable on the tire Force and Moment (F&M) characteristics, especially by the belt angle, the Plysteer Residual Aligning Torque (PRAT) which is considered as one of the causing factors for the vehicle pull. To validate the tire FE model, the tire stiffness and the PRAT which can be derived from the simulation data have been compared with the experimental data of test machine. In addition to PRAT characteristic, the tire stiffness and cornering characteristics due to the belt angle have been investigated. The effects of drum's curvature on the PRAT have been also investigated using the tire FE model and the usefulness of the current drum type F&M test machine can be confirmed.

• Steel and Composite Structures
• /
• 제12권5호
• /
• pp.395-412
• /
• 2012

The present work addresses the rotational capacity of steel-concrete composite beams, which is a key issue for the seismic design of composite frames. Several experimental tests from the literature are summarised, and the effects of various parameters on the available plastic rotation are discussed. Furthermore, a number of remarks are made regarding the need for supplementary experimental results. The authors carried out experimental tests on four composite beams in which the type, width and connection degree of the slab were varied. During the tests, the deflection and strains in the steel profiles and bars were measured and recorded, wherein the observed trends in the measured parameters indicated that the failure mode of the beam was influenced by global and local buckling. A comparison of the experimental results to the theoretical ultimate strengths and moment-curvature relationships confirms that buckling phenomena occurred after section yielding, even if a consistent plastic rotation developed. This rotational capacity is well evaluated by a formulation that is available in the literature.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.989-992
• /
• 2008

최근 교량 구조물의 장지간화와 건물의 초고층화에 따라 고강도 콘크리트가 많이 적용되고 있다. 철근 콘크리트 구조물의 처짐은 균열의 발생으로 그 거동이 불확실하여 많은 연구자들은 실험을 통하여 처짐을 예측하는 식을 제안하였다. 현재 국내 콘크리트구조설계기준에서는 Branson이 제시한 유효휨강성을 이용한 처짐 산정식을 제안하고 있다. 하지만 이 식은 보통강도 콘크리트를 대상으로 등분포하중상태에서 실시한 실험결과를 토대로 도출한 처짐 산정식이므로 다른 하중상태나 고강도 콘크리트 부재에서는 잘 맞지 않는다. 유효 휨강성을 이용하여 처짐을 구하는 방법과는 달리 Eurocode 2에서는 곡률을 적분하여 처짐을 산정하는 방법을 제안하고 있다. 본 연구에서는 고강도 콘크리트 보의 실험데이터를 이용하여 콘크리트구조설계기준과 Eurocode 2의 처짐산정식에 의하여 계산된 처짐값과 비교 분석하고자 한다.

• KIEAE Journal
• /
• 제11권1호
• /
• pp.9-14
• /
• 2011

Currently, the multi-residential apartments used in Korea are mostly bearing wall apartments which don't satisfy consumers for the lack of architectural plan flexibility. And due to remodelling-incompatible, bearing wall apartments have to be reconstructed. It is, thus, necessary to develop multi-residential apartments utilizing composite beam that can replace the conventional bearing wall-type apartment buildings. Composite beams proposed in this paper ensure modification of space and quality control, while the floor heights are maintained at the same floor height as in bearing wall structures. This study analyzes the experimental behavior of composite beams with proper combination of structural steel, reinforced concrete, and precast concrete. By comparing with the theoretical analysis and experimental results, the accuracy of flexural moment capacity and neutral axis was evaluated. The experiments were performed by two simply-supported specimens using loading and unloading. When the analysis results were compared with the experimental results, the flexural moment capacity of the composite beam was shown with an error of approximately -0.5 to 0.1% at the maximum load limit state.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.308-315
• /
• 2005

The capacity protection is normally related with slenderness effect of the columns, force transfer in connections between columns and adjacent elements, and shear design of columns. It is intends to prevent brittle failure of the structural components of bridges, so that the whole bridge system may show ductile behavior and failure during earthquake events. For bridge systems, this means it is necessary to assess the overstrength capacity of columns prior to proceeding with the design of foundation and superstructure. The objective of this paper is to develop a capacity design approach that applies an overstrength factor for determination of possible maximum shear force in the plastic hinge zone of reinforced concrete bridge columns. In order to estimate and determine overstrength factor, material strength was developed to investigate for actual material strength total 3,407 steel and 5,405 concrete by domestic product. Based on actual material strength, this paper was conducted on moment overstrength factors using moment-curvature analysis program. And also design recommendations for capacity design are presented to revise the annual report, KEERC 2002.

• 한국통신학회논문지
• /
• 제19권5호
• /
• pp.857-871
• /
• 1994

본 논문에서는 스파이럴 암폭이 넓은 경우와 좁은 경우, 곡률이 큰 경우와 작은 경우에 대한 스파이럴 안테나를 모먼트법을 이용하여 해석하였다. 그 방법은 안테나를 N개 선소로 분할하고 갤러킨 방법을 이용하여 각 선소의 전류분포를 구하고, 방사패턴을 계산한 다음 이들을 실험 결과와 비교하였다. 안테나의 이득이 주파수에 따란 +_ 5dB 이내로 변화가 있는 것은 밸런과 안테나간의 접속에서 나타나는 반사손실에 의한 것이다. 시뮬레이션 및 실험결과를 통하여, 본 스파이럴 안테나의 광대역 무지향 특성을 확인하였다.

• 콘크리트학회논문집
• /
• 제11권3호
• /
• pp.89-100
• /
• 1999

The purpose of this study is to develop an analytic model of the concrete column strengthened with laminated CFS, and to provide a basic guideline for the strengthening design by CFS considering orthotropic properties of laminate. In this study, an analytical stress-strain model of laminated CFS is presented based on Tsai-Hill failure criterion. This model has been implemented in an algorithm which can evaluate the confinement effect of CFS. Through this algorithm, the stress-strain relationship of confined concrete is obtained and compared with experimental results of other studies. Using the constitutive relationships, section analyses of concrete column strengthened with CFS are done, and load-moment and load-curvature interaction curves are obtained. In addition, the strengthening effects of CFS according to various laminated angles are analyzed. Analytical results show that the strengthening effects of the strengthened concrete columns are significantly different in compression, flexure, and ductility according to the laminated ways. In compressive direction of principal stress shows the superiority, where an in flexural strengthening effects, [0/90]s does. In the aspect of ductility, [90]s shows the best effect.

• Steel and Composite Structures
• /
• 제7권4호
• /
• pp.279-301
• /
• 2007

When coupling beams are proportioned appropriately in coupled core wall (CCW) systems, the input energy from ground motions is dissipated primarily through inelastic deformations in plastic hinge regions at the ends of the coupling beams. It is desirable that the plastic hinges form at the beam ends while the base wall piers remain elastic. The strength and stiffness of the coupling beams are, therefore, crucial if the desired global behavior of the CCW system is to be achieved. This paper presents the results of nonlinear response history analysis of two 20-story CCW buildings. Both buildings have the same geometric dimensions, and the components of the buildings are designed based on the equivalent lateral force procedure. However, one building is fitted with steel coupling beams while the other is fitted with diagonally reinforced concrete coupling beams. The force-deflection relationships of both beams are based on experimental data, while the moment-curvature and axial load-moment relationships of the wall piers are analytically generated from cross-sectional fiber analyses. Using the aforementioned beam and wall properties, nonlinear response history analyses are performed. Superiority of the steel coupling beams is demonstrated through detailed evaluations of local and global responses computed for a number of recorded and artificially generated ground motions.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권1호
• /
• pp.77-84
• /
• 2011

연속보를 대상으로 한 재료비선형 전달행렬법을 제시하였으며, Gauss-Lobatto 적분법을 사용하여 보의 강성행렬로부터 전달행렬을 도출한다. 전달행렬법에서는 유한요소해석법과는 달리 각 절점의 자유도 수에 상관없이 일정한 미지값만을 가지게 되므로 선형해석뿐만 아니라 비선형해석에서도 빠른 연산속도를 보인다. 연속보에 대한 비선형 해석의 적용 예를 통한 비교 결과, 재료비선형 전달행렬법이 변위-모멘트, 변위-하중, 곡률-모멘트의 관계에서 유한요소해석법에 비해 효율적인 것으로 평가되었다.