• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.145-145
• /
• 2017

음극재에 사용되는 타이타니아 나노튜브($TiO_2$ nanotubes)는 높은 종횡비를 가지고 있으며, 기계적인 강도가 우수하고 화학적인 안정성이 높다. 그러나 낮은 전기전도도와 상대적으로 넓은 밴드갭(bandgap)은 다양한 활용 분야에 이 물질이 활용되는 것을 제한하고 있는 상황이다. 전기 화학적 분야에서 광화학 반응 또는 과전압에서 밴드갭을 줄이기 위한 타이타니아 나노튜브의 나노 구조 변형에 대한 많은 연구가 있어왔다. 본 연구에서는 산화 몰리브덴(Molybdenum oxide)을 촉매로 사용하여 타이타니아 나노튜브에 전기충격법을 이용하여 도핑했다. 생성된 타이타니아 나노튜브를 $450^{\circ}C$에서 1시간 30분 동안 가열하여 타이타니아 나노구조를 아나타제(anatase) 구조로 변형켰다. 타이타니아 나노튜브의 구조적인 변화를 scanning electron microscopy(SEM), energy-dispersive X-ray spectroscopy(EDS) 등을 통해 측정했고 UV-Visiblespectroscopy를 통해 도핑된 타이타니아 나노튜브의 밴드갭을 측정하였다. 몰리브덴이 도핑된 타이타니아 나노튜브는 기존의 타이타니아 나노튜브가 가지는 밴드갭인 3.0 ~ 3.2eV 범위보다 더 낮아진 2.6 ~ 2.8eV의 범위를 가지는 것을 확인하였다. 몰리브덴이 도핑된 타이타니아 나노튜브는 다양한 광촉매 분야에 적용될 수 있을 것으로 예상된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.376-376
• /
• 2011

I-III-VI2 chalcopyrite compounds, particularly copper, indium, gallium selenide(Cu(InxGa1-x)Se2, CIGS), are effective light-absorbing materials in thin-film solar application. They are direct band-gap semiconductors with correspondingly high optical absorption coefficients. Also they are stable under long-term excitation. CIS (CIGS) solar cell reached conversion efficiencies as high as 19.5%. Several methods to prepare CIS (CIGS) absorber films have been reported, such as co-evaporation, sputtering, selenization, and electrodeposition. Until now, co-evaporation is the most successful technique for the preparation of CIS (CIGS) in terms of solar efficiency, but it seems difficult to scale up. CIS solar cells have been hindered by high costs associated with a fabrication process. Therefore, inorganic colloidal ink suitable for a scalable coating process could be a key step in the development of low-cost solar cells. Here, we will present the preparation of CIS photo absorption layer by a solution process using novel metal precursors. Chalcopyrite copper indium diselenide (CuInSe2) nanocrystals ranging from 5 to 20nm in diameter were synthesized by arrested precipitation in solution. For the fabrication of CIS photo absorption layer, the CuInSe2 colloidal ink was prepared by dispersing in organic solvent and used to drop-casting on molybdenum substrate. We have characterized the nanoparticless and CIS layer by XRD, SEM, TEM, and ICP.

• Journal of Surface Science and Engineering
• /
• v.51 no.3
• /
• pp.185-190
• /
• 2018

Dopant-free silicon heterojunction solar cells using Transition Metal Oxide(TMO) such as Molybdenum Oxide($MoO_X$) and Vanadium Oxide($V_2O_X$) have been focused on to increase the work function of TMO in order to maximize the work function difference between TMO and n-Si for a high-efficiency solar cell. One another way to increase the work function difference is to control the silicon wafer resistivity. In this paper, dopant-free silicon heterojunction solar cells were fabricated using the wafer with the various resistivity and analyzed to understand the effect of n-Si work function. As a result, it is shown that the high passivation and junction quality when $V_2O_X$ deposited on the wafer with low work function compared to the high work function wafer, inducing the increase of higher collection probability, especially at long wavelength region. the solar cell efficiency of 15.28% was measured in low work function wafer, which is 34% higher value than the high work function solar cells.

• Nuclear Engineering and Technology
• /
• v.46 no.2
• /
• pp.125-146
• /
• 2014

This review aims to provide a synthesis of the knowledge generated and the lessons learned in roughly 15 years of UMo dispersion fuel R&D in Europe through a series of irradiation experiments. A lot of irradiations were also performed outside of Europe, particularly in the USA, Russia, Canada, Korea and Argentina. In addition, a large number of out-of-pile investigations were done throughout the world, providing support to the understanding of the phenomena governing the UMo behaviour in pile. However, the focus of this article will be on the irradiations and Post-Irradiation Examination (PIE) results obtained in European experiments. The introduction of the article provides a historic overview of the evolution and progress in the high density UMo dispersion fuel development. The ensuing sections then provide further details on the various phases of the development, from the UMo dispersion in a pure Al matrix through the addition of Si to the matrix to address the interaction layer formation and finally to the more advanced solutions to the excessive swelling encountered in various experiments. This review was based only on published results or results that are currently in the process of being published.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.5
• /
• pp.491-497
• /
• 2019

Dissimilar friction welding were produced using 15 mm diameter solid bar in superalloy(Alloy718) to chrome molybdenum steel(SCM440) to investigate their mechanical properties. Consequently, optimal welding conditions were n=2000 rpm, HP=60 MPa, UP=120 MPa, HT=10 sec and UT=10 sec when the metal loss(Mo) is 3.5 mm. Acoustic Emission(AE) technique was applied to analyze the dissimilar friction welding of Alloy718 and SCM440. The relationship between the AE parameters and dissimilar friction welding of both material was discussed. In the case of heating time of 6 sec, 10 sec, 14 sec and 20 sec, 5 AE events per 0.5 seconds and energy about $2.7{\times}10^{10}$ were exhibited in heating time. In upsetting time, resulting in various numbers of events per second and very low energy. The frequency range of the signal generated during the heating time was about 200 kHz. However, the upsetting time resulted in a wide range of signals from very low frequency to high frequency of 500 kHz due to rapid plasticity of the material.

• Elastomers and Composites
• /
• v.54 no.2
• /
• pp.135-141
• /
• 2019

Polyphenylene sulfide (PPS) was filled with glass fiber (GF), aramid fiber (AF), and solid lubricants to improve the mechanical properties and wear resistance. The addition of GF effectively enhanced the tensile strength, flexural modulus, and impact strength of PPS, while solid lubricants such as polytetrafluoroethylene (PTFE), molybdenum disulfide ($MoS_2$), and tungsten disulfide ($WS_2$) lowered the friction coefficients of the composites to below 0.3. The ball nut and motor pulley of the electric power steering (EPS) were manufactured using the PPS composites, and feasibility was ascertained thereafter by conducting the durability test. The composites filled with GF and AF showed high mechanical strength, but slip occurred at the interface between the pulley and belt while testing above $50^{\circ}C$. When small amounts of lubricants were added, the slip was no longer detected because of the suppression of friction heat. It is realized that the low friction as well as high mechanical properties is important to ensure the reliability of plastic pulleys.

• Korean Journal of Agricultural Science
• /
• v.48 no.1
• /
• pp.179-189
• /
• 2021

Plants need essential mineral elements to favorably develop and to complete their life cycle. Despite the irreplaceable roles of microelements, they are often ignored due to the relative importance of macroelements with their influence on crop growth and development. We focused on the changes in primary metabolites in the leaves and roots of bell pepper plants under 6 microelements-deficient conditions: Copper (Cu), Zinc (Zn), Iron (Fe), Manganese (Mn), Boron (B) and Molybdenum (Mo). Bell pepper plants were grown in hydroponic containers, and individual elements were adjusted to 1/10-strength of Hoagland nutrient solution. A remarkable perturbation in the abundance of the primary metabolites was observed for the Fe and B and the Mn and B deficiencies in the leaves and roots, respectively. The metabolites with up-accumulation in the Fe-deficient leaves were glucose, fructose, xylose, glutamine, asparagine and serine. In contrast, the Mn deficiency also resulted in a higher accumulation of glucose, fructose, xylose, galactose, serine, glycine, β-alanine, alanine and valine in the roots. The B deficiency noticeably accumulated alanine, valine and phenylalanine in the roots while it showed a substantial decrease in glucose, fructose and xylose. These results show that the primary metabolism could be seriously disturbed due to a microelement deficiency, and the alteration may be either the specific or adaptive responses of bell pepper plants.

• Nuclear Engineering and Technology
• /
• v.54 no.2
• /
• pp.701-708
• /
• 2022

The mass attenuation coefficients (μ_m) of polyethylene glycol (PEG) of different molecular weights (1000-200,000) were measured using single-beam photon transmission. The X-ray fluorescent (XRF) photons from Zinc (Zn), Zirconium (Zr), Molybdenum (Mo), Silver (Ag) and Cadmium (Cd) targets were used to determine the attenuation of gamma radiation of energy range between 8.67 and 23.19 keV in PEG samples. The results were compared to theoretical values using XCOM and Monte Carlo simulation using Geant4 toolkit which was developed to validate the experiment at those certain energies. The mass attenuation coefficients were then used to compute the effective atomic numbers, electron density and half value layers for the studied samples. The outcomes showed good agreement between experimental and simulated results with those calculated theoretically by XCOM within 5% deviation. The PEG 1000 sample showed slightly higher μ_m value compared with the other samples. The dependence of the photon energy and PEG composition on the values of μ_m and HVL were investigated and discussed. In addition, the values of Z_eff and N_eff for all PEG samples behaved similarly in the given photon energy range, and they decreased as the photon energy increased.

• Journal of Periodontal and Implant Science
• /
• v.26 no.1
• /
• pp.143-160
• /
• 1996

The purpose of this study was to evaluate the response in aspect of attachment and growth rate of osteoblasts and growth rate of osteoblasts and human gingival fibroblasts to the commercially pure titanium(CP titanium)and titanium alloy(Ti-6AI-4V) that are used widely as implant materials, and to obtain the basic information to ideal implant materials. In the studly, commercially pure titanium in first test group, titanium alloy(Ti-6AI-4V) in second test group, cobalt-chrome-molybdenum alloy(Co-Cr-Mo alloy) in positive control group, and tissue culture polystyrene plate in negative control group were used. The results of this study were as follows. 1. Bone marrow cells cultured on CP titanium and Ti-6Al-4V showed significantly greater attachment and growth rate(p(0.05) compared to Co-Cr-Mo alloy in each time. 2. There were no significant differences(p>0.05) in attachment and growth rate of bone marrow cells cultured on CP titanium and Ti-6AI-4V or tissue culture plate. 3. Most bone marrow cells cultured on CP titanium, Ti-6Al-4V and tissue culture plate were attached well to each substratum in first 2days, and then, grew at higher growth rate. On the other hand, some cells cultured on Co-Cr-Mo alloy failed to attach in first 2 days, and then, attached cells grew at lower growth rate than other groups. 4. Attachment and growth rates of gingival fibroblasts cultured on CP titanium and Ti-6Al-4V showed no significant differences(p>0.05) compared to Co-Cr-Mo alloy in 2 days, but significantly greater increase(p<0.05) in 5 and 9 days. 5. There were no significantly differences(p>0.05) between growth rates on gingival fibroblasts cultured on CP titanium, Ti-6Al-4V and tissue culture plate in 2 and 5days, but a significant lower growth rate(p<0.05) on CP titanium and Ti-6Al-4V versus tissue culture plate. 6. Some gingival fibroblasts cultured on all specimen groups failed to attach, but attached cells grew well, especially on CP titanium, Ti-GAl-4V and tissue culture plate. 7. There were no significant differences(P>0.05) between growth rates of both bone marrow cells and gingival fibroblasts cultured on CP titanium and Ti-6AI-4V. As a result of this study, both commercially pure titanium and Ti-6AI-4V showed excellent biocompatibility and there was no significant difference in the cellular response to the both metals. Bone marrow cells cultured on each substratum showed significantly greater growth rate and responded sensitively to cytotoxic effects of metal surfaces compared to gingival fibroblasts. Considering cell response to the substrate, it was likely that the composition itself of titanium metals have no significant effect on the biocompatibility. Further study need to be done to evaluate the influence of surface characteristics on cellular responses.

• Journal of the Korean Chemical Society
• /
• v.36 no.1
• /
• pp.3-15
• /
• 1992

Electronic structures and reactivities of the chromium, molybdenum, and tungsten carbene complexes, $(CO)_5Cr=CCHCH_2(XCH_3)\;,\;(CO)_5Mo=CCHCH_2(XCH_3)\;, and\;(CO)_5W=CCHCH_2(XCH_3)$, are studied by means of Extended Huckel calculations. The origin of the M=Ccarbene double bond is clarified from the diagram of the orbital correlation with the fragment orbitals. The ${\sigma}$ bond of the M=Ccarbene double bond is formed by the electron transfer interaction from the HOMO of the carbene to the LUMO of the $(CO)_5M$. The ${\pi}$ bond is formed through the back-transfer of electrons from one of the degenerated d${\pi}$ orbitals to the LUMO of the carbene. The polarization of charge of the M=Ccarbene bond is calculated to be M=Ccarbene for Mo, and W carbenes. The chemical and physical properties of these complexes are resulted from an appreciable positive charge on the carbene carbon. The electrophilic reactivity of the carbene carbon is not charge controlled, but is controlled by the frontier orbital, LUMO.