• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1200-1201
• /
• 2006

Attempts have been made to describe the influence of production process parameters on the microstructure and properties of W-Ag and Mo-Ag composites. The compositions of powder mixtures are W+30% Ag and Mo+30%Ag. Silver additions assists densification during sintering by a liquid phase sintering process. The main goal of this work is to compare properties and microstructure of as-sintered and as-infiltrated composites.

• 한국주조공학회지
• /
• 제14권1호
• /
• pp.35-44
• /
• 1994

Mechanical properties of austempered ductile iron can be guaranteed if a good knowledge of its metallugical structure is obtained. In this paper, the effects of small Mo additions to austempered ductile iron on its metallurgical structures as a function of section size are examined. From the results, it is found that ${\gamma}-pool$ region and segregation of Mo in ${\gamma}-pool$ region are increased with increase in the section size.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.38-41
• /
• 2001

The combustion characteristics of the disilicides molybdenum system have been studied experimentally. The pertinent reaction parameters that control self-propagating high temperature synthesis reactions have been examined. These include reactant particle size, powder mixing and compaction, reaction stoichiometry, diluents. The inf1uence of experimental variables on integrity, uniformity, structure, and related material properties will be discussed. Formation mechanism of MoSi$_2$ during SHS might be different and depending on experimental conditions.

• EDISON SW 활용 경진대회 논문집
• /
• 제2회(2013년)
• /
• pp.214-216
• /
• 2013

The atomic and electronic properties of molybdenum disurfide ($MoS_2$) nanostructures are investigated through density functional theory (DFT) calculations. We find that the band gap is indirect (about 1.79 eV) and direct (about 1.84 eV) in GGA for 2-dimensional $MoS_2$ in our calculations. On the other hand, 1-dimensional armchair nanoribbons have semiconductor properties (band gap is about 0.11~0.28 eV), while 1-dimensional zigzag nanoribbons are metallic.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1015-1016
• /
• 2006

The microstructures and properties of pure molybdenum wire and $Mo-La_2O_3$ alloy wire annealed at different temperatures are investigated systematically in this paper. It is shown that the recrystallization temperature, toughness and strength at room temperature of this wire was increased greatly by addition of $La_2O_3$. The room temperature embrittlement of this wire annealed at high temperature is improved remarkably.

• 한국진공학회지
• /
• 제6권2호
• /
• pp.143-150
• /
• 1997

본 연구에서는 1000$\AA$두께의 Molybdenum화합물(Mo, Mo-N,$MoSi_2$, Mo-Si-N)의 Cu에 대한 확산방지막으로서의 특성을 면저항측정장비(four-point-probe), XRD, XPS, SEM, RBS 분석을 통하여 조사하였다. 각 박막층은 dc magnetron sputtering장비를 이용하 여 증착되었고 $300^{\circ}C$-$800^{\circ}C$의 온도구간에서 30분동안 진공열처리하였다. Mo 및 $MoSi_2$ 방지 막은 낮은 온도에서 확산방지막으로서의 특성파괴를 보였다. 결정립계를 통한 Cu의 확산과 Mo-실리사이드내의 Si의 Cu와의 반응이 그 원인인 것으로 사료된다. 질소를 첨가한 시편의 경우 확산방지특성 파괴온도는 Mo-N방지막의 경우 $650^{\circ}C$-30분, Mo-Si-N방지막의 경우 $700^{\circ}C$-30분으로 향상되었다. Cu와 Si의 확산은 방지막의 결정립계를 통하여 더욱 빠르게 확 산된다. 따라서 증착시 결정립계를 질소와 같은 물질로 채워 Cu와 Si의 확산을 저지할 수 있을 것으로 사료된다. 본 실험결과에서의 질소첨가는 이와 같은 stuffing 효과외에도 Mo- 실리사이드 박막의 결정화 온도를 다소 높인 것으로 나타났고, 그 결과 결정립계의 밀도를 감소시켜 확산방지막으로서의 특성을 향상시킨 것으로 사료된다. 또한 질소첨가는 실리사이 드내의 금속과 실리콘과의 비를 변화시켜 확산방지막의 특성에 영향을 미친 것으로 보인다. 본 실험에서 조사된 확산방지막 중에서는 Mo-Si-N박막이 Cu와 Si간의 확산을 가장 효과적 으로 저지시킨 것으로 나타났으며 $650^{\circ}C$-30분까지 안정한 특성을 보였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.605-608
• /
• 2001

Molybdenum disilicide is widely used for manufacturing high-temperature heating elements owing to its low electrical resistivity, good thermal conductivity, and ability to withstand oxidation at high temperatures. MoSi$_2$heating elements with 4-5wt% of montmorillonite type bentonite as plasticzer and a small amount of Si$_3$N$_4$, ThO$_2$, and B as additives was manufactured. Extruded rods of 3.7mmø and 6.7mmø diameter and 400mm long were fabricated using a vacuum extruder, which were then sinrered for 4-5 hrs. at the max. temperrature of 140$0^{\circ}C$. After 10 minute's oxidation treatment, the diameter of the rod is reduced. The heating elements thus prepared was stable at 1$700^{\circ}C$ and the physical properties such as specific electrical resistivity, hardness, apparent densisty, thermal expansion coefficient, and bending strength were almost identical with thoes of commercial heating elements. In this study we have tried to gain the practical knowledge of manufacturing MoSi$_2$heating elements so that it may be utilized later in a research of pilot scale and eventually be transferred to industry.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권3호
• /
• pp.323-328
• /
• 2000

The administration of soluble glass bolus (SGB) with cobalt (Co), selenium (Se) and copper (Cu), among 50 upgraded does in the farm of Central Luzon State University, Philippines, was effective in improving the mineral status of the animals. After one year, blood Se and plasma Cu had been significantly increased; subsequently plasma molybdenum (Mo) level had been reduced, but other macro-minerals were not affected. Soluble glass bolus supplementation did not affect plasma calcium (Ca), magnesium (Mg), and sodium (Na), although the treated does had higher plasma phosphorus (P), potassium (K), and zinc (Zn) in some parts of the year. Hematocrit count of the animals was also improved reaching 32% level after 9 months; although it was still 6% below the lower limit of a normal range of 38 to 45%. The desired improvement in Se, Cu and Mo was not able to influence live weight among the animals. After one year, body weight was not significantly different from the control group of animals. Nevertheless, the study showed the effectiveness of SGB in improving Cu and Se levels, and subsequently reducing the plasma Mo levels of grazing goats in a typical Philippine farm.

• 한국주조공학회지
• /
• 제15권3호
• /
• pp.283-290
• /
• 1995

Molybdenum ingot of 50mm in diameter were obtained from sintered Mo bars by EB drip melting technique. Macroscopic observation of EB remelted ingot indicates that coarse and columnar grains grow in the direction parallel to ingot pulling direction. This can be explained by slow solidification (3mm/min), large temperature gradient and heat flow to this direction. The orientation of columnar structure was found to be <110>, <200> and <211> by the analysis of X-ray diffraction patterns. The contents of typical metallic impurities in Mo sintered bar are 1.2ppm Cr, 3ppm Fe, 44ppm Zr, 150ppm W. Most of metallic impurities were reduced below the order of ppm except zirconium and tungsten by the selective evaporation. In the removal of nonmetallic impurities, oxygen and carbon impurities were lowered from 120 to 6ppm and from 157 to 106ppm, respectively, after first melting. Although the purification effect was not significant with the number of remelting, Vickers hardness was reduced from 217 to 195 and 184 in sequence with increasing the number of remelting.

• 한국재료학회지
• /
• 제24권8호
• /
• pp.401-406
• /
• 2014

In this study, we investigated the precipitation behavior of the R-phase precipitated at the initial stage of aging and its effects on the mechanical properties of 25%Cr-7%Ni-2%Mo-4%W super duplex stainless steel. The R-phase was mainly precipitated at the interface of ferrite/austenite phases and inside of the ferrite phase during the initial stage of aging. It was transformed into the ${\sigma}$-phase with an increase of the aging time. The ferrite phase was decomposed into a new austenite(${\gamma}_2$)phase and the ${\sigma}$-phase by an aging treatment. The R phase was an intermetallic compound showing higher molybdenum and tungsten concentrations than the matrix and also showed higher molybdenum and tungsten concentrations than the ${\sigma}$ phase. In the initial stage of aging, precipitation of the R-phase did not change the hardness, the strength and the elongation. The hardness and the strength increased upon a longer aging time, but the elongation rapidly decreased. These results show that the R-phase did not significantly affect the hardness and the strength, though it did influence the elongation.