• Journal of Radiation Protection and Research
• /
• v.23 no.2
• /
• pp.83-88
• /
• 1998

Chitosan is a nontoxic natural chealtor which was made by chitin, and reduced a contamination of radiostrontium in animals. In this experiment, A different molecular weight of C-14 chitosan was intravenously administered to mice, and then the distribution of C-14 chitosan in the body was observed. Male mice (8 to 10 weeks, body weight of 30 to 35g) of ICR strain were used. C-14 chitosan was diluted with saline and then given intravenously in mice. After the administration of C-14 chitosan, mice was sacrificed at the 6th hour, 1st, 3rd, 5th, and 7th day. Beta radioactivities in the blood, liver, kidney, liver, muscle, testis, and urine was measured using a liquid scintillation analyzer. Most of the C-14 chitosan was excreted through urine within 6 hours. Biodistribution of C-14 chitosan was similar despite the difference of moleclar weight. Higher distributions of radioactivities were found in the liver, kidney, spleen. The relative concentration in tissue increased for the 6 hours and then decreased. In conclusion, most of C-14 chitosan was excreted through urine despite the difference of molecular weight. and, low molecular weight of C-14 chitosan showed higher distribution than high molecular weight of C-14 chitosan in tissues.

• Polymer(Korea)
• /
• v.39 no.3
• /
• pp.388-393
• /
• 2015

Low molecular weight species were extracted from PC and SAN by a solvent extraction method in order to investigate the effect of low molecular weight species on interfacial tension and affinity between PC and SAN. From the analysis of molecular weight distribution by the GPC, it was confirmed that the low molecular weight species were effectively eliminated by the solvent extraction. Interfacial tension measurements and morphological observation were carried out with the PC and SAN of which the low molecular weight species were extracted. Interfacial tension was increased and the infinity was decreased for the extracted PC and SAN pair. This result implied that the low molecular weight species play a role as a compatibilizer between two polymers. Among two polymers, low molecular weight SAN contributes more in the compatibilization. Thus, it is favorable to use SAN containing a larger amount of low molecular weight species in fabrication of PC/ABS blend.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.766-771
• /
• 1993

A mathematical model is developed to represent the batch reactor for free radical polymerization of PMMA The model is validated by comparing the simulation result with the experimental data. A computational scheme is proposed to determine the trajectory of the reactor temperature that will produce polymer product having the desired molecular weight distribution. For this instantaneous number average chain length and polydispersity are introduced to calculate the reactor temperature. The former is assumed to be a second order polynomial of the sum of the living and dead polymer concentrations. Various reactor temperature, trajectories are observed depending on the reactor conditions and prescribed molecular weight distributions. Fuzzy and PID control algorithms are applied to trace the reactor temperature trajectory. While the PID control gives rise to an overshoot when the trajectory changes its direction, the fuzzy controller yields a more satisfactory performance because it secures information on the trajectory pattern.

• Journal of the Korean Chemical Society
• /
• v.4 no.1
• /
• pp.38-43
• /
• 1957

Purified cellulosic materials suitable for the production of cellulose esters can be prepared from waste cotton (carding waste from textile mill). The most desirable conditions in purifying waste cotton were obtained. Waxy materials were removed by boiling in 2-3% soda ash solution for more than 30 minutes in open vessel at atmospheric pressure. As for bleaching, it is desirable to use the bleaching powder solution containing 1%, available chlorine for 60 minutes at 35 deg. C. Purified cellulosic material was acetylated to fibrous cellulose triacetate, which was fractionated in the solution of 70% monochloroacetic acid using water as a precipitant, and the degree of polymerizaion and molecular weight of each fraction were measured viscometrically, thereon, molecular weight distribution curve was drawn. Analyzing the shape of this curve, most of the polymers were concentrated on the part of higher degree of polymerization. Purified waste cotton was also analysed, the result was that this cellulosic material can be used as a raw material for cellulose esters and ethers.

• Elastomers and Composites
• /
• v.32 no.3
• /
• pp.173-178
• /
• 1997

In this study, the ultrasonic irradiation in elevated pressure was used to alter the molecular weight and MWD of polystyrene. The high pressure reactor was filled with 0.5w/v% polystyrene solution, and then it was pressurized from 500psi to 4000psi. The ultrasound was irradiated in 10 minutes at each pressure, and the extract was collected and analyzed by GPC. Molecular weight distribution was predicted by log-normal and Schulz distribution function. The average molecular weight and polydispersity of polystyrene were decreased, as the pressure applied during the ultrasonic irradiation was increase. It was able to fractionate polymer material and control polydispersity by adjusting pressure in the ultrasonic irradiation.

• Journal of Microbiology
• /
• v.34 no.3
• /
• pp.279-283
• /
• 1996

The weight average molecular weight of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) synthesized by Alcaligenes sp. SH-69 was altered between $3.2$\times$10^5$ and $1.1$\times$10^6$ depending upon various culture conditions. It appeared that culture conditions favorable for the efficient production of copolyesters promoted the formation of higher molecular weight copolyesters. Polydispersity indices of isolated copolyesters were in the range of 1.5 to 2.5.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.20 no.2
• /
• pp.99-105
• /
• 2010

In this paper, the regenerated silk fibroins were dissolved in LiBr aqueous solution with different dissolution temperature and time, and the effects of the dissolution condition on the regeneration yield, molecular weight, wet spinnability, and electrospinnability of regenerated silk fibroin were investigated. The regeneration yield, molecular weight distribution, and wet spinnability of regenerated silk fibroin were nearly affected by the dissolution temperature and time. However, the electrospinning performance of silk fibroin was influenced by the dissolution condition implying the electrospinning of silk fibroin is more sensitive process than the wet spinning in the range tested in this study. While $25^{\circ}C$ of dissolution temperature resulted in a good electrospinnability of regenerated silk fibroin, the electrospinnability was slightly deteriorated when silk fibroin was dissolved at $60^{\circ}C$ for 6 hours. Also, though the fiber diameters of electrospun silk fibroin produced by the dissolution at $25^{\circ}C$ for 6 hours and 24 hours were 443 and 451 nm, respectively, that at $60^{\circ}C$ for 5 min was reduced to 411 nm. The fiber diameter was more decreased to 393 nm when the dissolution time increased up to 6 hours at $60^{\circ}C$.

• Macromolecular Research
• /
• v.11 no.5
• /
• pp.341-346
• /
• 2003

A poly(ethylene oxide)-b-poly(L-lactide) diblock copolymer (PEO-b-PLLA) is characterized by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) and a block length distribution map is constructed. Although the MALDI- TOF mass spectrum of PEO-b-PLLA is very complicated, most of the polymer species were identified by isolating the overlapped isotope patterns and by fitting the overlapped peaks to the Schulz-Zimm distribution function. Reconstructed MALDI-TOF MS spectrum was nearly identical to the measured spectrum and this method shows its potential to be developed as an easy and fast analysis method of low molecular weight block copolymers.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.325-328
• /
• 2000

The effects of DO and pH on the mass production of pullulan with high-molecular weight from A. pullulans ATCC 42023 were evaluated. The maximum pullulan production yield (51%) was obtained at pH non control (initial pH 6.5) and DO control (above 50%) condition. The pullulan degrading enzyme was activated when the pH of broth reached lower than 5.0 and portion of low molecular weight pullulan was increased. The formation of a black pigment was observed at the initial stationary phase, 40hr of fermentation. Therefore, the fermentation should be carried out in pH non control and DO control condition and harvested before reaching stationary phase around 40h for the production of high molecular weight pullulan.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.19 no.1
• /
• pp.64-74
• /
• 2001

This study is to find the effect of the molecular weight distribution of components on the freeness and physical properties of paper by observing the change of properties according the modification of fibers by using production technology and process technology together to develop additives which can effectively control according to the purpose of paper-making process and by combining low molecular weight cellulase (below MW 20,000; CMC activity 400 unit) with different enzyme's molecular weight and activity and high molecular weight cellulase(MW 20,000∼80,000;CMC activity 90,000 unit) and then process them in Sw-BKP(Softwood Bleached Kraft Pulp) and Hw-BKP(Hardwood Bleached Kraft Pulp) and Cotton Linter Pulp and OCC(Old Corrugated Container) with different properties of pore of surface of fibers respectively, since it is judged that making the appropriate composition ratio of components is necessary in consideration of the properties of fibers and paper-making process.