• International Journal of Aeronautical and Space Sciences
• /
• 제17권1호
• /
• pp.1-7
• /
• 2016

The influence of boundary condition of the bodies with gas flows is one of the most important problems in high-altitude aerodynamics. In this paper presents the results of the calculation of aerodynamic characteristics of aerospace vehicle using Monte-Carlo method based on three different gas-surface interaction models - Maxwell model, Cercignani-Lampis-Lord (CLL) model and Lennard-Jones (LJ) potential. These models are very sensitive for force and moment coefficients of aerospace vehicle in the hypersonic free molecular flow. The models, method and results can be used for new generation aerospace vehicle design.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1544-1545
• /
• 2011

For quantitative understanding of gas discharge phenomena, we should know electron collision cross section. Processing plasma etching of semiconductor, and research are being used in the etching source $C_4F_6$ gas may be used by itself and mixed with other gases are also used. However, the molecular gas $C_4F_6$ study on the characteristics of the electron transport and the cross-sectional area of the decision is still lacking. Therefore, we understand the electron transport characteristics and analysed the electron transport coefficients. And to understand and interpret physical properties of the ionization coefficient ${\alpha}$/N, and the attachment coefficient ${\eta}$/N in $C_4F_6$ gas.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.58-61
• /
• 2006

n-Pentane and n-hexane, previously regarded as non-hydrate formers, are found to form structure H hydrate in mixtures with 2,2-dimethylbutane. Even though they are thought to be too large to fit into the largest cage of the structure H hydrate, powder XRD and NMR measurements show that they form gas hydrates in mixtures with other sH hydrate former. These findings are of fundamental interest and also will impact the composition and location of natural gas hydrates and their potential as global energy resource and climate change materials.

• 대한전기학회논문지
• /
• 제44권7호
• /
• pp.889-894
• /
• 1995

The structural changes of the merocyanine monolayer LB (Langmuir Blodgett) films were investigated. These changes were compared with the typical changes of the molecular structures of merocyanine solutions. The structural changes of quinoid/benzenoid were attained by exposure to atmosphere gases (HCl gas, N $H_{3}$ gas). The photoisomerization was not observed for the monolayer LB film due to their state of $M_{trans}$. But we could obtain the cis/trans photoisomerization characteristics reversibly, after the films were changed to M $H^{+}$$_{trans}$ structure by exposure to HCl gas. We also found that the cis/trans photoisomerization of the LB monolayer films show the memory characteristics.s.

• 제어로봇시스템학회논문지
• /
• 제3권1호
• /
• pp.46-51
• /
• 1997

The optimal control of a continuous process has been performed using genetic algorithms(GAs). GAs are robust and easily applicable for complex and highly nonlinear problems. We introduce the heuristics 'dynamic range' which reduces the search space dramaticaly keeping the robust search of GAs. GAs with dynamic range show the better performance than SQP(Successive Quadratic Programing) method which converges to a local minimum. The proposed methology has been applied to the optimal control of the continuous MMA-VA copolymerization reactor for the production of the desired molecular wieght and the composition of VA in dead copolymer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.152-155
• /
• 1994

The purpose of this paper is to develope an electron beam resist by the plasma polymerization. Plasma co-polymerized resist was prepared using an interelectrode gas-flow-type reactor. And then delineated pattern in the resist was developed with gas flow type reactor using Ar and O$_2$ gas as etching gas. We study about the effects of discharge power and mixing rate of the copolymerized thin film. The characteristics of molecular structure of thin film was investigated by FT-lR, DSC and GPC, and then was discussed in relation to its quality as a resist.

• 천문학회보
• /
• 제36권2호
• /
• pp.56.1-56.1
• /
• 2011

We investigate the hydrodynamics of gas clouds in the central few hundred parsecs of the Galaxy. Non-axisymmetry (elongation) of the Galactic bulge can form a reservoir of dense molecular clouds at around two hundred parsecs from the center through the X1-X2 orbit transfer, and the star formation that has been sustained for the lifetime of the galaxy can build up a nuclear bulge there. If the nuclear bulge is elongated, this again can transport the gas there down to the central few parsecs region. We perform a series of 3-D hydrodynamic simulations that consider a potential for this "nested bar", cooling/heating, star formation and supernova feedback, and estimate the efficiency of the gas inflow down to the central parsec region.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제8권3호
• /
• pp.179-182
• /
• 2003

Anaerobic fermentation was attempted to produce methane from the wood chip (Eucalyptus globulus). By the pretreatment of the wood chip using hot water with high temperature, NaOH, and steam explosion, the production of methane gas was enhanced. The pretreatment using Steam explosion resulted in more amount of methane gas produced than the treatment using either hot water or 1% (w/w) NaOH with high temperature, and the steam explosion at a steam pressure of 25 atm and a steaming time of 3 min was the most effective for the methane production. The amount of methane gas produced depended on the ratio of weight of Klason lignin, a high molecular weight lignin, in the treated wood chip.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.317-319
• /
• 2000

We fabricated the QCM with Langmuir-Blodgett(LB) film deposited at the different subphase pH and investigated the resonant frequency response by the injection of organic gas response. In the $\pi$-A isotherms, the monolayer on the air/water interface had different limiting area per molecule and showed more condensed status as increasing the subphase pH. When palmitic acid LB film was deposited on the QCM, the resonant frequency shift was proportional to the deposited layer and had more resonant frequency shift in the case of the higher pH range as expected. In the resonant frequency for the injection of organic gas, it has been improved in the case of LB film fabricated at the lower subphase pH range and dependant upon the molecular weight of organic gas.

• Nuclear Engineering and Technology
• /
• 제43권6호
• /
• pp.477-488
• /
• 2011

A formulation is proposed for modelling the process of intra-granular diffusion of fission gas during irradiation of $UO_2$ under both normal operating conditions and power transients. The concept represents a simple extension of the formulation of Speight, including an estimation of the contribution of bubble motion to fission gas diffusion. The resulting equation is formally identical to the diffusion equation adopted in most models that are based on the formulation of Speight, therefore retaining the advantages in terms of simplicity of the mathematical-numerical treatment and allowing application in integral fuel performance codes. The development of the new model proposed here relies on results obtained by means of molecular dynamics simulations as well as finite element computations. The formulation is proposed for incorporation in the TRANSURANUS fuel performance code.