• 제목/요약/키워드: molecular distribution

검색결과 1,411건 처리시간 0.028초

분자의 논랜덤 분포가 기체의 상태방정식에 미치는 영향 (The Effect of Nonrandom Distribution of Molecules on the Equation of State for Gases)

  • 정해영
    • 대한화학회지
    • /
    • 제57권5호
    • /
    • pp.540-546
    • /
    • 2013
  • van der Waals식의 자유부피항, 강체구형입자에 대한 Carnahan-Starling식, 용액의 논랜덤 혼합을 고려한 Wilson식, NRTL식과 본 연구자의 식등을 사용하여 기체에 대한 여러 개의 새로운 상태방정식을 만들었다. 이 식들을 이용하여 순수 기체에 대한 압축인자를 계산하였고 이를 실험적인 Nelson-Obert 압축인자도표와 비교하였다. 분자의 논랜덤 분포를 고려하여 유도된 상태방정식들이 랜덤분포를 가정한 상태방정식보다 더 좋은 결과가 나왔다. 이를 통하여 분자의 논랜덤 분포가 상태방정식에 상당한 영향을 미친다는 것을 알 수 있다.

분자동역학을 이용한 나노 인덴테이션과 상변화 해석 연구 (Molecular Dynamic Simulation of Nano Indentation and Phase Transformation)

  • 김동언;손영기;임성한;오수익
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2003년도 추계학술대회논문집
    • /
    • pp.339-346
    • /
    • 2003
  • Molecular dynamic simulations of nano indentation on single-crystal silicon (100) surface were performed using diamond indentor. Silicon substrate and diamond indentor were modeled diamond structure with Tersoff potential model. Phase transformation of silicon, incipient plastic deformation, change of incident temperature distribution are investigated through the change of potential energy distribution, displacement-load diagram, the change of kinetic energy distribution and displacements of silicon atoms. Phase transformation is highly localized and consists of a high-density region surrounding the tip. Axial load linearly increased according to the indenting depth. Number of atoms with high kinetic energy increased at the interface between substrate and indentor tip.

  • PDF

Calculation of Pressure Profiles in a Molecular Flow Regime using LTSpice IV

  • Choi, Won-Shik;Kang, Kun-Uk;Kim, Se-Hyun;Park, Chongdo
    • Applied Science and Convergence Technology
    • /
    • 제25권4호
    • /
    • pp.67-72
    • /
    • 2016
  • This article describes an electrical network analysis (ENA) method to calculate the pressure distribution of a vacuum system in a molecular flow regime. The vacuum system was modeled using electrical components. For an accurate analysis, a complexly combined pipe model, excluding entrance conductance, was employed and the pressure distribution was simulated using ENA. A vacuum system comprising three vacuum pumps was used for simplicity. In addition, the ENA results were compared with results from finite element analysis (FEA) and experimental measurements. The pressure distribution profiles estimated from ENA, performed using the LTSpice IV software, were in agreement with FEA and experimental results.

Enzymatic hydrolysis of insoluble silk sericin by Alcalase

  • Jung, Hye-Young;Bae, Do-Gyu
    • 한국잠사곤충학회지
    • /
    • 제42권1호
    • /
    • pp.48-57
    • /
    • 2000
  • This study was undertaken to figure out the effects of hydrolysis conditions on the solubility of insoluble sericin, molecular weight distribution and thermal characteristics of hydrolysates in enzymatic hydrolysis by Alcalase 2.5L. It was indicated that the optimum treatment temperature and pH for the insoluble sericin were 50$\^{C}$ and 11, respectively. When the insoluble sericin was hydrolyzed with a various treatment conditions, the solubility of all hydrolysates were represented above 85% at given conditions. As the enzyme concentration increased, the solubility increased roughly, but the solubility increasement ratio was less above 2% enzyme concentration. As the treatment time increased, the solubility was also increased. It was showed in the molecular weight distribution of hydrolysates treated various enzyme concentrations and treatment times that when enzyme concentrations were 0.5, 2, 3%, the peaks of the distribution curve were shifted to left side which meant low molecular weight and was distributed much quantity with shifted to be left side, but treatment time was 6 hr. the peak was shifted to right side. When enzyme concentration was 5% and treatment time was below 2 hr., the peaks were shifted to right side, but treatment time was above 4hr. the peak was shifted to left side. The number-average molecular weights were distributed from 300 to 800 and those were decreased when treatment time was up to 4 hr., but increased a little when treatment time was 6hr. It was showed in the DSC curves of hydrolysates treated with treatment time of 0.5, 1, 2, 4, 6 hr. fixed 1% o.w.s enzyme concentration and control that the endothermic peak was observed near at 200$\^{C}$. The denaturation peak of the hydrolysates depending on treatment times had a tendency to shift to higher temperature. But, when the treatment time was 6 hr., the peak was shifted to lower temperature comparing another hydrolysates.

  • PDF

상온 노화 후 고무가황물에서 왁스의 이동과 증발에 미치는 왁스의 분자량 분포 (Influence of Wax Molecular Weights on Wax Migration and Evaporation of Rubber Vulcanizates at Room Temperature)

  • 임송희;최성신
    • Elastomers and Composites
    • /
    • 제44권4호
    • /
    • pp.397-400
    • /
    • 2009
  • 오존은 상온에서 폴리머 이중 결합의 산화작용을 활발하게 하여 표면 갈라짐을 유발시킨다. 왁스는 고무 표면으로 이동하여 물리적 방어막을 형성하여 오존의 작용을 방지한다. 비보강 NR, SBR, BR 가황물을 상온에서 6개월간 노화 시켜 노화 전후의 왁스의 분자량 분포 변화를 조사하였다. 상온 조건에서 고무 가황물에 있는 왁스의 이동과 증발 거동은 노화방지제로서의 왁스의 역할과 고무 제품의 외관 오염을 이해하는데 도움을 준다. NR 시험편에서 알칸의 상대 세기 분포는 노화 후 고분자량쪽으로 이동하였으나 SBR 시험편의 경우에는 노화 전후의 분자량 분포 모양에는 큰 차이가 없었다.

Mitochondria-Specific Monoclonal Antibodies in Eggs and Embryos of the Ascidian Halocynthia roretzi

  • Baek, Yong Han;Lee, Wang Jong;Kim, Gil Jung
    • 한국발생생물학회지:발생과생식
    • /
    • 제21권4호
    • /
    • pp.467-473
    • /
    • 2017
  • Ascidian embryos have become an important model for embryological studies, offering a simple example for mechanisms of cytoplasmic components segregation. It is a well-known example that the asymmetric segregation of mitochondria into muscle lineage cells occurs during ascidian embryogenesis. However, it is still unclear which signaling pathway is involved in this process. To obtain molecular markers for studying mechanisms involved in the asymmetric distribution of mitochondria, we have produced monoclonal antibodies, Mito-1, Mito-2 and Mito-3, that specifically recognize mitochondria-rich cytoplasm in cells of the ascidian Halocynthia roretzi embryos. These antibodies stained cytoplasm like reticular structure in epidermis cells, except for nuclei, at the early tailbud stage. Similar pattern was observed in vital staining of mitochondria with DiOC2, a fluorescent probe of mitochondria. Immunostaining with these antibodies showed that mitochondria are evenly distributed in the animal hemisphere blastomeres at cleavage stages, whereas not in the vegetal hemisphere blastomeres. Mitochondria were transferred to the presumptive muscle and nerve cord lineage cells of the marginal zone in the vegetal hemisphere more than to the presumptive mesenchyme, notochord and endoderm lineage of the central zone. Therefore, it is suggested that these antibodies will be useful markers for studying mechanisms involved in the polarized distribution of mitochondria during ascidian embryogenesis.

Effects of Halothane on Dimyristoylphosphatidylcholine Lipid Bilayer Structure: A Molecular Dynamics Simulation Study

  • Oh, Kwang-Jin;Klein, Michael L.
    • Bulletin of the Korean Chemical Society
    • /
    • 제30권9호
    • /
    • pp.2087-2092
    • /
    • 2009
  • We performed molecular dynamics simulations on dimyristoylphosphatidylcholine lipid bilayer with 50 mol% halothane. The structural properties, electron density profile, segmental order parameter of acyl chains, headgroup orientation distribution, water dipole orientation distribution, have been examined. Overall the effects of the halothane molecules on structural properties of DMPC lipid bilayer were found to be small. The electron density profiles, the segmental order parameter, the headgroup orientation, the water dipole orientation were not affected significantly by the halothane molecules. Pressure tensor calculations shows that the lateral pressure increases at the hydrocarbon tail region and the headgroup region, and decreases at the water-headgroup interfacial region.

DISTANCE DETERMINATION TO THE MOLECULAR CLOUDS IN THE GALACTIC ANTI-CENTER REGION

  • KIM HYUN-GOO;LEE YOUNGUNG;PARK BYEONG-GON;KIM BONG-GYU
    • 천문학회지
    • /
    • 제33권3호
    • /
    • pp.151-158
    • /
    • 2000
  • We conducted a deep CCD observations in V band to obtain stellar density distribution and to determine the distances toward two molecular clouds with anomalous velocity in the Galactic anti-center region. Star count method based on the linear programming technique was applied to the CCD photometric data. We found two prominent peaks at distances of around 1.4 and 2.7 kpc. It is found that the first peak coincides well with stellar density enhancement of B8-A0 stars and the second one with the outer Perseus arm. The effect of the choice of the luminosity function is discussed. The stellar number density distribution is used to derive the distances to the molecular clouds and the visual extinctions caused by the clouds. We found that two molecular clouds are located almost at the same distance of about 1.1 $\pm$ 0.1 kpc, and the peak extinctions caused by the clouds are about 2.2 $\pm$ 0.3 mag in V band.

  • PDF

Photo-induced Living Cationic Polymerization of Tetrahydrofuran. III. Synthesis of Poly(THF-co-3-MTHF)

  • Soukil Mah;Choi, Jia;Lee, Hansup;Choi, Soonja
    • Fibers and Polymers
    • /
    • 제1권1호
    • /
    • pp.1-5
    • /
    • 2000
  • Poly(3-methyltetrahydrofuran)(3-MTHF) and poly(tetrahydrofuran-co-3-MTHF), having very narrow molecular weight distribution were successfully synthesized via photo-induced living cationic polymerization in the presence of diphenyliodonium hexafluorophosphate. Linear relationship between % conversion and number average molecular weight of resulting poly(3-MTHF) in the polymerization of 3-MTHF, carried out at -22$^{\circ}C$, indicates that the 5-membered cyclic oxonium ion, being responsible for the cationic propagation is stabilized by ion pall formation with hexafluorophosphate anion, supplied from the salt. The linear relationship between two parameters, mentioned above was also observed in the copolymerization of 3-MTHF with THF, carried out at 0 and -22$^{\circ}C$. The molecular structures including the copolymer composition and average molecular weight and its distribution is determined by reaction parameters such as monomer feed ratio and reaction temperature.

  • PDF

공동캡슐화를 이용한 키토산 분해반응에서 alginate 막의 특성 및 크기에 따른 올리고당의 분자량 내외 분포

  • 이기선;최명락;송상호;임현수
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
    • /
    • pp.608-611
    • /
    • 2000
  • To separate chitosanoligosaccharides easily by size exclusion, an coencapsulating technology of substrate and enzyme was developed. Chitosan and chitosanase were enveloped in this membrane and the product released to medium by size exclusion. The lower limit of the alginate concentration and the agitation speed were 0.5% and 40 rpm, respectively. Membrane thickness and capsules diameter were $10{\mu}m$ and approx. 3.0mm, 1.5mm, respectively. The molecular weight difference by concentration and cps of alginate were of little significance. And also, the molecular weight of distribution according to enzyme concentration was low concentration of enzyme produced high molecular weight of oligosaccharides. At 1.5mm size of capsule, product diffusion rate to outer part was higher than other capsules. The molecular weight distribution of the released oligosaccharides ranged from 1000 to 6000 Da.

  • PDF