• 제목/요약/키워드: molecular diffusion

검색결과 450건 처리시간 0.024초

ρ-알루미나결합 알루미나 캐스터블의 용융슬래그에 의한 침식기구 (Kinetics and Mechanism of Corrosion of ρ-alumina Bonded Alumina Castable by Molten Slag)

  • 천승호;전병세
    • 한국세라믹학회지
    • /
    • 제40권10호
    • /
    • pp.1015-1020
    • /
    • 2003
  • $\rho$-알루미나 결합 진동성형용 알루미나 캐스터블 내화물의 매트릭스부분과 용응 슬래그와의 침식거동을 젭센(Jabsen)이 주장한 이론을 기초로 하고 킹거리(Kingery)가 제안한 반응 기구를 통해 규명하였다. 매트릭스 부분의 초기침식이 분자확산거동에 의하여 지배되며, 아레니우스 관계식과 잘 일치하고 있어 온도의존성 활성화 과정으로 받아들 수 있다. 슬래그와 경계층의 Ca 농도차이가 23.2%로서 경계층을 형성하기 위한 물질이동의 구동력이 되었다. 매트릭스의 침식정도가 뮬라이트 소결체보다 심하지만 킹거리의 침식반응 기구와 잘 일치하고 있어 캐스터블의 수명예측이 가능하다.

유기플라스틱 결정체의 PMR 연구 (제 1 보). 피발산 (PMR in Organic Plastic Crystals (I). Pivalic Acid)

  • 최종권;잔 그레함
    • 대한화학회지
    • /
    • 제19권3호
    • /
    • pp.149-155
    • /
    • 1975
  • 플라스틱 결정체인 피발산의 temperature-dependent wide-line NMR line width, second monent 및 spin-lattice relaxation times 의 결과는 이 결정체의 특이한 운동학적 성질 및 수소결합에 기인된 것으로 해석된다. 이 분자의 운동학적 성질은 $C_3-C_3'$ reorientation 및 self-diffusion 으로 구성 되었음을 확인했다. Wide-line NMR 연구결과는 또한 Pople-Karasz 융해설과 비교검토되었고, 이 이론과의 차이점은 피발산의 수소결합에 기인되었음을 알아냈다.

  • PDF

특정 온도에서 용융 실리카의 확산거동 및 구조분석 (Structural Properties and Diffusion Behaviors of Liquid Silica at Finite Temperatures)

  • 이병민
    • 한국세라믹학회지
    • /
    • 제44권6호
    • /
    • pp.319-324
    • /
    • 2007
  • The structural properties of $SiO_2$ liquid at finite temperatures have been investigated by molecular dynamics (MD) simulations utilizing the Tersoff interatomic potential. During cooling process, the $SiO_2$ liquid structure quenched with a cooling rate of $1.0{\times}10^{11}K/sec$ shows the traditional properties observed in the experiments. The coordination defects of system decrease with decreasing temperature up to 17%. The $SiO_2$ glass quenched up to 1600 K contains defects consisting of the fivefold coordination of Si, and the threefold coordination of O atoms. The calculated diffusion coefficients which are calculated by monitoring. the mean-square displacement of atoms drop to almost zero below 3000 K ($<10^{-6}\;cm^2/sec$) but has a fluctuations at low temperature. The structure properties of $SiO_2$ liquid shows a significant dependence on the temperature during cooling process. Bond-angle distribution at around $120^{\circ}$ originate from the O and Si atoms consisting of the over-coordinated O atoms.

Molecular Dynamics Simulation Studies of Physico Chemical Properties of Liquid Pentane Isomers

  • 이승구;이송희
    • Bulletin of the Korean Chemical Society
    • /
    • 제20권8호
    • /
    • pp.897-904
    • /
    • 1999
  • We have presented the thermodynamic, structural and dynamic properties of liquid pentane isomers - normal pentane, isopentane, and neopentane - using an expanded collapsed atomic model. The thermodynamic properties show that the intermolecular interactions become weaker as the molecular shape becomes more nearly spherical and the surface area decreases with branching. The structural properties are well predicted from the site-site radial, the average end-to-end distance, and the root-mean-squared radius of gyration distribution func-tions. The dynamic properties are obtained from the time correlation functions - the mean square displacement (MSD), the velocity auto-correlation (VAC), the cosine (CAC), the stress (SAC), the pressure (PAC), and the heat flux auto-correlation (HFAC) functions - of liquid pentane isomers. Two self-diffusion coefficients of liquid pentane isomers calculated from the MSD's via the Einstein equation and the VAC's via the Green-Kubo relation show the same trend but do not coincide with the branching effect on self-diffusion. The rotational re-laxation time of liquid pentane isomers obtained from the CAC's decreases monotonously as branching increases. Two kinds of viscosities of liquid pentane isomers calculated from the SAC and PAC functions via the Green-Kubo relation have the same trend compared with the experimental results. The thermal conductivity calculated from the HFAC increases as branching increases.

순간적인 화학물질 누출에 따른 초기 피해영향 범위 산정을 위한 분산모델 연구 (Dispersion Model of Initial Consequence Analysis for Instantaneous Chemical Release)

  • 손태은;이의주
    • 한국안전학회지
    • /
    • 제37권2호
    • /
    • pp.1-9
    • /
    • 2022
  • Most factories deal with toxic or flammable chemicals in their industrial processes. These hazardous substances pose a risk of leakage due to accidents, such as fire and explosion. In the event of chemical release, massive casualties and property damage can result; hence, quantitative risk prediction and assessment are necessary. Several methods are available for evaluating chemical dispersion in the atmosphere, and most analyses are considered neutral in dispersion models and under far-field wind condition. The foregoing assumption renders a model valid only after a considerable time has elapsed from the moment chemicals are released or dispersed from a source. Hence, an initial dispersion model is required to assess risk quantitatively and predict the extent of damage because the most dangerous locations are those near a leak source. In this study, the dispersion model for initial consequence analysis was developed with three-dimensional unsteady advective diffusion equation. In this expression, instantaneous leakage is assumed as a puff, and wind velocity is considered as a coordinate transform in the solution. To minimize the buoyant force, ethane is used as leaked fuel, and two different diffusion coefficients are introduced. The calculated concentration field with a molecular diffusion coefficient shows a moving circular iso-line in the horizontal plane. The maximum concentration decreases as time progresses and distance increases. In the case of using a coefficient for turbulent diffusion, the dispersion along the wind velocity direction is enhanced, and an elliptic iso-contour line is found. The result yielded by a widely used commercial program, ALOHA, was compared with the end point of the lower explosion limit. In the future, we plan to build a more accurate and general initial risk assessment model by considering the turbulence diffusion and buoyancy effect on dispersion.

Diffusion-Selectivity Analysis of Permanent Gases through Carbon Molecular Sieve Membranes

  • Kang, Jong-Seok;Park, Ho-Bum;Lee, Young-Moo
    • Korean Membrane Journal
    • /
    • 제5권1호
    • /
    • pp.43-53
    • /
    • 2003
  • The selectivity of a gas in the carbon molecular sieve membrane (CMSM) can be expressed as the ratio of the product of the diffusivity and the solubility of two different gases. The diffusivity is also expressed as the product of the entropy and the total energy (kinetic and potential energy) in the nano-sized pore of the membrane. The present study calculates the entropic-energy and selectivity of penetrant gases such as H$_2$, O$_2$, N$_2$, and CO$_2$ from the gas-in-a box theory to physically analyze the diffusivity of penetrant gas in slit-shaped pore of CMSM focusing on the restriction of gas motion based on the size difference between penetrant gas pairs. The contribution of each energy term is converted to entropic term separately. By the conjugated calculation for each entropic-energy, the entropic effects on diffusivity-selectivity for gas pairs such as H$_2$/N$_2$, CO$_2$/N$_2$, and O$_2$/N$_2$ were analyzed within active pore of CMSM. In the activated diffusion domain, the calculated value of entropic-selectivity lies between 9.25 and 111.6 for H$_2$/N$_2$, between 3.36 and 6.0 for CO$_2$/N$_2$, and between 1.25 and 16.94 for O$_2$/N$_2$, respectively. The size decrement of active pore in CMSM had the direct effect on the reduction of translational entropic-energy and the contribution of vibrational entropic-energy for N$_2$, O$_2$, and H$_2$ was almost negligible. However, the vibrational entropic term of CO$_2$ might extravagantly affect on the entropic-selectivity.

Dielectric and Transport Properties of Acetonitrile at Varying Temperatures: a Molecular Dynamics Study

  • Orhan, Mehmet
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권5호
    • /
    • pp.1469-1478
    • /
    • 2014
  • Use of acetonitrile in electrolytes promotes better operation of supercapacitors. Recent efforts show that electrolytes containing acetonitrile can also function in a wide range of operating temperatures. Therefore, this paper addresses the dielectric relaxation processes, structure and dynamic properties of the bulk acetonitrile at various temperatures. Systems of acetonitrile were modeled using canonical ensemble and simulated by employing Molecular Dynamics method. Results show that interactions among the molecules were correlated within a cut-off radius while parallel and anti-parallel arrangements are observed beyond this radius at relatively high and low temperatures respectively. Furthermore, effects of C-C-N and C-H bending modes were greatly appreciated on the power spectral density of time rate change of dipole-dipole correlations whereas frequency shifts were observed on all modes at the lowest temperature under consideration. Linear variations with temperature were depicted for reorientation times and self-diffusion coefficients. Shear viscosity was also computed with a good accuracy within a certain range of the temperature as well.

Evaluation of Several Parameters of in situ Polymerase Chain Reaction (ISPCR) to Reduce the Leakage of Amplificants from Cells

  • Lee, Jae-Yung;Auh, Chung-Kyoon;George W. Jordan
    • Journal of Microbiology
    • /
    • 제40권1호
    • /
    • pp.70-76
    • /
    • 2002
  • Proviral DNAs from HIV-1-infected CD4+ T cells (Molt/LAV cells) were amplified and detected in infected individual cells using polymerase chain reaction and in rifu hybridization. In this in situ PCR, three parameters were considered to achieve effective amplification and retention of amplificants inside the cells by making high molecular weight PCR products intracellularly, forming agarose matrix against the cells, and maintaining the appropriate PCR temperature profile. Over the cycles of ampliHcationl tailed primers with complementary overhanging sequences at their 5' sides manufactured high molecular weight products by using short primary products as a repeating unit. Agarose matrix could prevent the diffusion of the amplificants from the cells. Use of Thermanox coverslip inside the PCR tube offered target cells a similar temperature profile to that of conventional PCR in solution.

Computation of viscoelastic flow using neural networks and stochastic simulation

  • Tran-Canh, D.;Tran-Cong, T.
    • Korea-Australia Rheology Journal
    • /
    • 제14권4호
    • /
    • pp.161-174
    • /
    • 2002
  • A new technique for numerical calculation of viscoelastic flow based on the combination of Neural Net-works (NN) and Brownian Dynamics simulation or Stochastic Simulation Technique (SST) is presented in this paper. This method uses a "universal approximator" based on neural network methodology in combination with the kinetic theory of polymeric liquid in which the stress is computed from the molecular configuration rather than from closed form constitutive equations. Thus the new method obviates not only the need for a rheological constitutive equation to describe the fluid (as in the original Calculation Of Non-Newtonian Flows: Finite Elements St Stochastic Simulation Techniques (CONNFFESSIT) idea) but also any kind of finite element-type discretisation of the domain and its boundary for numerical solution of the governing PDE's. As an illustration of the method, the time development of the planar Couette flow is studied for two molecular kinetic models with finite extensibility, namely the Finitely Extensible Nonlinear Elastic (FENE) and FENE-Peterlin (FENE-P) models.P) models.

Effect of Sodium Taurodihydrofusidate on Nasal Drug Delivery: Differences in Its Concentration and Penetrant Molecular Weight

  • Hosoya, Ken-ichi;Kubo, Hiroyuki;Takashi-Akutsu;Hideshi-Natsume;Kenji-Sugibayashi;Yasunori-Morimoto
    • Archives of Pharmacal Research
    • /
    • 제17권2호
    • /
    • pp.57-59
    • /
    • 1994
  • The effect of sodium taurodihydrofusidate (STDHF) on drug permeation across nasal mucosa was studied in vitro using Ussing type diffusion chamber. Disodium cromoglicate (DSCG, M.W.5123) and fluorescein isothiocyanate-dextran (FD) of different molecular wieghts (M.W. 4400-71200) were used as model drugs. Pemeation profiles of DSCG and FDs showed a typical pseudo steady-state curve with short lag time. The pemeability coefficient of FD (M.W. 9400) sigmodially increased with increasing STDHF concentration. It also enhanced the DSCG pemeation. Interestingly the enhancement efficacy was independent of molecular weight of penetrants.

  • PDF