• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.5
• /
• pp.495-501
• /
• 2011

We present an experimental study of electrical discharge in nanoscale gaps. The discharge occurred between a cathode made of sharpened Pt-Ir wire and a gold-plated anode. Electric discharges were detected for electric potentials from 10 V to 80 V, and their gaps ranged from 50 nm to 800 nm. The spark signals indirectly showed spark phenomena such as discharges or shortages in the system. The sparks and discharges strongly depended on the electric potential (voltage) and the radius of the tips. For small gaps, the electrical discharge was random and strongly depended on the radius of the cathode tips.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.3
• /
• pp.182-188
• /
• 2001

An experiment is carried out to investigate the characteristics of blanking for copper alloy C194 (t=0.254mm), a kind of IC lead frame material. By varying clearance between die and punch, the shapes of shear profile are examined. Finite element analysis with element deletion algorithm for ductile fracture mode is also carried out to study the effect of clearance theoretically and to compare with experimental results. The rectangular shape specimen with four different corner radius is used to study the characteristics of blanking for straight side and corner region simultaneously. As the result, the ratios measured from the experiment of roll over, burnish, and fracture zone based on intial blank thickness are compared with those of FE analysis. Both experiment and FE analysis show that the amount of roll over and fracture is increased as the clearance increases. It has been found that larger clearance is required than that of straight region when the radius of corner is less than thickness of blank, in order to maintain same quality of shear profile at the corner region.

• IE interfaces
• /
• v.21 no.2
• /
• pp.221-228
• /
• 2008

The injection molding process is able to produce high precision manufactures as a single process with fast speed. However, the prices of both the mold and the molding machine are expensive, and the single process is very complex and difficult to compose of the exact relationship between the process setting conditions and the product quality. Therefore, the quality of a molded product often depends on a skillful engineer's operations in the design of both parts and molds. In this paper, the relationship between the process conditions and the defectiveness is built for better manufactures under settings of the appropriate parameters, and so it can reduce the setup time in the injection molding process. Quality Function Deployment (QFD) provides severe defectiveness factors along with the related process parameters. Also, neural networks estimate the relationship between defective factors and process setting parameters, and lead to reduce the defectiveness of molded parts.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.2
• /
• pp.14-21
• /
• 2003

Rapid prototyping(RP) has been used for design verification and proto sample or mold manufacturing. Many RP systems have been introduced into the market during the past 15 years. However, until now, the systems have used mainly for external physical models (mono function), and have the basic but critical limitation of one material on one stage (mono material). To overcome the limitations of mono-material and mono-function of conventional. RP systems, the concept of Functional Phototype Development (FPD) is newly proposed in this paper FPD provides the necessary prototype functions such as mechanical, optical, chemical and electrical properties in order to meet the broad requirements of the industry. The paper illustrates the representative achievements of electronic components such as the multi-layer printed circuit board(MLB). Experimental results demonstrate that FPD has great potential applied to broad industrial uses and that It Will be a powerful tool in the neat future.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.02a
• /
• pp.125-131
• /
• 2002

Surface defects in injection molded parts are due to the unsteady flow of polymer melt which are related to the geometries of cavity and gate, the operational conditions of injection and the rheological properties of polymer. In this study we have examined jetting phenomena in injection molding process for three kinds of PCs which have different molecular weight and structure, PBT and PC/ABS alloy with several injection speeds. We have used various cavity shapes that are tensile, flexural and impact test specimens with various gate and cavity thicknesses. Through this study we have observed that the formation of surface defect associated with jetting during filling stage in injection molding is strongly related to die swell. This means that the jetting is strongly affected by the elastic property rather than the viscous property in viscoelastic characteristics of molten polymer. Large die swell would eliminate jetting however, the retardation of die swell would stimulate jetting. In the point of mold design, reducing the thickness ratio of cavity to gate can reduce or eliminate jetting and associated surface defects regardless of magnitude of elastic property. It also enlarges process window that can produce steady flow of polymer melt in injection molding.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.6
• /
• pp.590-595
• /
• 2014

We have investigated anamorphic prism lenses with distortions of 0.3-0.5%. We designed the plastic triangular lens and confirmed the minimum resolution using MTF graphs. Also we confirmed that the SVGA optical system can realize a resolution of $864{\times}648$ 56 megapixels. A distortion of about 0.5% aberration appears in the maximum field, and a finite beam aberration of about $15{\mu}m$ is confirmed. We made a mold based on the design data and completed the prism lens through exodus molding. We confirmed the shape error (< $30{\mu}m$) and surface roughness (> 40 nm) of the three sides. We made the video-information-display prototype glasses using prism lens by measuring the performance, we determined the distortion aberration (0.3%) and SVGA resolution. Our approach will enable fabrication of a portable large-screen display device for glasses and sunglasses for the domestic market and, after 2015, for the world market.

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.3
• /
• pp.177-186
• /
• 1996

Surface alloying of Ti alloy by $CO_2$ laser is able to produce few hundred micrometers thick TiN or TiC surface-alloyed layer with high hardness on the substrate by injecting reaction gas($N_2$ or $CH_4$). Laser surface alloying by means of process control is in many applications essential in order to obtain predictable hardening layer. This research has been investigated the effect of such parameters on TiN and TiC gas alloying of Ti-6Al-4V alloy by $CO_2$ laser. The maximum surface hardness of TiN layer was obtained 1750Hv on the conditions of 0.8kW laser power, 0.8m/min scanning speed and 100% $N_2$ atmosphere. However, the maximum hardness of TiC formation layer after laser treatment was about 630Hv. As scanning speed was increased, the hardness and depth of these layers were decreased at constant laser power.

• Journal of Fashion Business
• /
• v.21 no.5
• /
• pp.109-121
• /
• 2017

In this study, we proposed the Bustier which improves the fit and functionality to compensate the physical defects by maximizing the volume up effect using the breast detailed measurements and shapes of the poor breast female subjects. Based on the preliminary study of the problem and preference according to the characteristics of the poor breast women consumers, we produced 1/2 volume mold cups based on the previous research. Respectively. A total of 5 subjects were selected, and new 3 bustier patterns based on the pattern making system of industry were created through direct measurement and shapes. As a result of verifying the usability of the developed bustier by testing the commercially available bustiers and the newly developed bustiers for 5 subjects. In order to compare the existing bustiers with the newly developed bustiers, the appearance evaluation by the expert, the evaluation of the adaptability and satisfaction by the subjects were utilized. Through this experiment, the newly developed bustiers were superior in the evaluation of the motion adaptability and wear comfort as well as appearance test. It was shown that the wear effect of the bustier with the longest back length was the best.

• Fashion & Textile Research Journal
• /
• v.6 no.5
• /
• pp.648-654
• /
• 2004

The purpose of this study was to develops of brassiere pattern for middle school students (15 ages ${\mp}$ 3). In order to design a brassiere pattern, the body surface shell was used as the basic pattern. The foundation pattern and the four-piece brassiere pattern with wire were designed and sewed. The results of this study can be summarized as follows. 1. The foundation pattern of the size 75A was proved proper for the body by the wearing tests. Each angle and length of the parts on the base line of the breasts played an important role on setting the pattern. 2. As based on the body surface shell extracted from a plaster mold, the cups of brassiere pattern were applied to the body surface shell, and full side stretch -wings were applied to 8% reduced body size. 3. As the result of the wearing test, the excellence of the experimental brassiere was recognized objectively, with high marks in all the items of clothing compensation, body motion, clothing pressure and breasts growth. The experimental brassiere was covering the whole breasts to cope with change according to breasts growth, It was designed to support the breasts firmly, not to press the middle part of them. Simultaneously, this has the advantages that satisfy a characteristic of a figure and the purpose of putting it on.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.32-36
• /
• 2002

High-speed movement and high-precision machining are the two most important requirements of present machine tool structures to reduce machining time and to increase the precision of products in various industrial fields such as semiconductor, automobile, and mold fabrication. The high speed operation of machine tools tue usually restricted not only by the low stiffness but also by the low damping of machine tool structures, which induces vibration during high speed machining. If the damping of machine tool structures is low, self induced or regenerative vibrations are bound to occur at high speed operation because the natural frequencies of machine tool structures can not be increased indefinitely. Therefore, the high damping capacity of a machine tool structure is an important factor for high speed machine tool structures. Polymer concrete has high potential for machine tool bed due to its good damping characteristics. In this study, a polymer concrete bed combined with welded steel structure i.e., a hybrid structure was desisted and manufactured for a high-speed gantry-type milling machine through static and dynamic analyses using finite element method. Then the dynamic characteristics were tested experimentally.