• Fashion & Textile Research Journal
• /
• v.17 no.6
• /
• pp.988-995
• /
• 2015

Gaps between the upper edges of brassiere mold cups and the breasts are one of the most serious issues in realizing comfort wearing of commercial brassieres for small-breasted women. The surplus ease amounts causing the fit problem were measured from 3D wearing images of the small-breasted women's brassieres. The effect after the removing the surplus ease amounts from the upper edge of mold cup was approved by subjective wearing evaluation. Since the volume distribution of mold cup can also affect the wearing sensation of brassiere, the subjective wearing sensation was compared for two brassieres of different volume distributions, V_L, of which volume was concentrated at the lower cup, and V_C, which has the thickest part at the nipple. As the results, the suitable sensation for cup volume and the natural wearing silhouette could be accomplished by removing the surplus ease amounts from the upper edge of mold cup to reduce the gaps between brassieres and the breasts, which could be accomplished through an approach reducing the volume near the upper edge of mold brassiere cup and making the volume concentrated at the lower cup. These works provide a useful information on the design of the brassiere mold cups for small-breasted women. Moreover, modeling methods of 3D scan data and 3D printing technique for making more accurate mold cases used in this research can be helpful to develop and evaluate clothing products in future.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.6
• /
• pp.767-775
• /
• 1999

The purpose of this study is to investigate the visual sensibilities of brassiere design. Brassieres were divided into three types according to connection of a cup and a strp. In each type Lace was used where the part of the cup divided by Lines which were constructed such as a mold a horizontal a vertical a mixed and an oblique design. As a result 39 brassieres were obtained. The experiment has been done for seven groups which were divided by the type line and lace with 5 semantic differential bi-polar scales and 10 specialists. The data was analyzed using the statistical SPSS package. The major findings of this research were as follows. An oblique design line in the brassiere were effective in making the breast look bigger more buxom and more voluminous. To make the breast look small and unvoluminous the use of a mold in the 1/2 cup brassiere was effective. Also a mold using lace ion the 1/2 cup brassiere had an effect in making the breast look flatter and broader.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.2
• /
• pp.15-26
• /
• 2013

The purpose of this study is to offer basic data for designing and making of brassiere with the consideration of the physiological nature of man. Each of 3/4-cup wired upward-support-type Mold Bra of 75 size with basic pad made at three representative domestic companies (A, B and C Company) was selected for analysis of pattern and components. The following is the result of this study. 1. That Company A's bra had the highest cup, relatively narrow width, the widest front-center and the highest front center at front pad. That of Company B had relatively short wing over the base and much difference at the height of cup depending on the presence of wire. That of Company C had low and wide cup, the widest bust span and the front center width, the front center height of front pad, the base length of front pad and the length of wings were observed to be of the figures between those of Company A and B. 2. The Bra of Company A had the biggest front center angle of $6^{\circ}$, while that of Company C had the biggest wing angle of $18^{\circ}$. The Bra of Company B showed the biggest difference of patterns depending on the presence of wire. Those of Company A and C showed very similar shape when wire was inserted. 3. The order of making brassiere is following: making of exterior mold cup${\rightarrow}$ sewing exterior cup and circumference of mold${\rightarrow}$ sewing base and wings${\rightarrow}$ sewing binding tape to base${\rightarrow}$ sewing cup and main pad${\rightarrow}$ sewing binding tape to upper sides and upper part of wings${\rightarrow}$ sewing wire-tape to interior base of cup${\rightarrow}$ inserting of wire inside wire-tape${\rightarrow}$ sewing hook & eye on the back of wings${\rightarrow}$ sewing shoulder string.

• Korean Journal of Human Ecology
• /
• v.24 no.2
• /
• pp.285-295
• /
• 2015

To identify optimized thermal properties of mold brassiere cup for improved thermal comfort during summer, we compared the thermal resistance and the water vapor permeability of Polyurethane (PU) foam, 3D spacer fabric and the two combined materials of the PU foam and the 3D spacer fabric. Four experimental mold brassieres were made of the materials for wearing test. Six women in their twenties evaluated the wearing sensation in the hot and humid environment. The changes in microclimate temperature and humidity while wearing test brassiere cups were measured. Results indicate that thermal resistance increased as more PU foam were combined, while the water vapor permeability was higher as the content of the 3D spacer fabric increased at thickness of 18mm and over. However, in the wear test, the PU foam brassiere was the most preferred in all ambient conditions due to its soft, flexible and smooth texture, despite its high thermal resistance and low water vapor permeability. This indicates that the textures of mold foams are more dominant properties than thermal properties for mold foams in determining the wear comfort of mold brassieres.

• Korean Journal of Human Ecology
• /
• v.24 no.6
• /
• pp.847-857
• /
• 2015

The ratio of small-breasted women occupies over 20% among Korean women in their twenties. However, the commercial brassieres for the small-breasted women were not fitted well to their breast shapes. In this research, the various commercial mold brasseries for small-breasted women were evaluated through the wearing test and the analysis of 3D images which were scanned from their torsos wearing the brassieres. In addition, professional panels performed the appearance evaluation based on the 2D front and side images captured from 3D images taken by 3D measurement systems. As the results, we found that small-breasted women preferred a 3/4 cup brassiere, of which volume is concentrated in the lower cup. The most preferred brassiere in wearing state shows that the characteristic angle between the chest and the upper cup is about 167 degrees, which is smaller than those of another brassieres, and that the ratio of the radius of curvature of the nipple part to that of the lower cup was about 0.78. These results provide important implications regarding the design of mold brassieres for small-breasted women in spite of the fact that these results represent the selected set of commercial brassieres. Therefore, further studies are highly demanded for the most suitable design information of mold cup for small-breasted women.

• Journal of Fashion Business
• /
• v.9 no.6
• /
• pp.12-28
• /
• 2005

The purpose of this study is to help develop high quality brassieres with functionality and comfort, fitting adolescents' physical features during their growth period. This study conducts a comparative analysis of juvenile brassiere and adult brassiere to identify the problems of brassieres in the market. The raw data for this study was processed by SPSS 10.1. The results of this study are summarized as follows: 1. The results of this survey show that the girls' satisfaction of their breasts has correlations between breast protrusion degree and volume. The girls think that if they have protrusive breasts their breast volume is big, and their breast satisfaction level shows high. 2. The results show that the objective of brassiere wearing is to prevent breasts sag and rupture, make good breast shape, balance their entire body shape, and make beautiful outer garment line. Brassiere functions are to prevent jiggle of breasts, make a good body line, and cover the nipples. For the grader school students, they are wearing brassiere to make a good balanced body and as their breasts developed, they are wearing brassiere for beautiful body shape not just to cover up their breasts. 3. In regard to brassiere cup size recognition, as students have higher grade at school, they have better recognition abouxt their cup size. As they are better aware of their cup size, they have better satisfaction with their cup size. Therefore, choosing the right size of brassiere for their bust is very important. 4. Girl students' brassiere preference shows that 317 students (56.9%) prefer white for brassiere colors, following pink and flesh color. Their most preferred brassiere material is cotton (354 people, 63.6%) because cotton is not sensitive even for weak skin. For brassiere style, 273 students (49%) prefer round style, following spots and mold. Their most preferred brassiere style is stake. In addition, brassiere should not press their breasts because their breasts are developing during puberty period.

• Korean Journal of Human Ecology
• /
• v.18 no.2
• /
• pp.397-406
• /
• 2009

A Study on the Development of Brassiere Pattern for Elderly Women The purpose of this study is to develop functional and sensible brassiere for elderly women. For this purpose, 6 elderly women(aged between 65 and 69) were sampled to be measured for their body sizes and tested for their bressiere wearing. he results were as follows; 1. In order to develop the basic patterns of elderly women's bressieres, 90B size was selected and then, their bressiere fitting was tested. The foundation pattern of the size 90A was proved for the body by the wearing tests. Each angle and length of the parts on the basic line of the breasts played an important role on setting the pattern. 2. As based on the body surface shell extracted from a plastic mold(photo.2), the cup of brassiere pattern were applied to the body surface shell(photo.4), and full side stretch-wings were applied to 13% reduced body size. The design pattern of elderly women's brassiers were characterized by a round wired as well as a full cup(3piece) embracing the entire breasts. 3. As the result of the wearing test, the excellence of the experimental brassiere was recognized objectively, with high marks in all the items(fig. 6). The experimental brassiere was covering the whole breasts to cope with change according to breasts loosing. It was designed to support the breasts firmly.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.1
• /
• pp.94-105
• /
• 2021

This study analyzes the shape change of the breast according to the replica combination method of the lower cup and suggest a pattern construction for the end use purpose. To provide appropriate brassiere patterns to each individual who has various 3D shape characteristics, the ways of layout of 3D replicas were investigated as well as evaluated subjectively and objectively. As for experimental brassieres, basic replicas from the mold cup of long-run brassiere were combined into five different ways to find the appropriate lower brassiere cup pattern. Eighteen women wore experimental brassieres and their breasts were analyzed using the Geomagic Design X program (3D System, Inc., Korea). As result, the pattern that matched the vertexes of the four pieces of the replica and naturally spread the bottom part was best for raising and pushing toward the inside breasts. The fit was good in the case of a pattern in which the convex portions overlapped both sides of the four replica pieces where the vertexes and the bottom part naturally spread apart. The subjects were able to differentiate comfortably fitted brassieres and highly functional brassieres.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.5
• /
• pp.635-644
• /
• 1999

The purpose of this study is to investigate the visual sensibilities of brassiere design. Brassieres were divided into three types according to connection of a cup and a strap. In each type Lace was used where the part of the cup divided by lines which were constructed such as a mold horizontal a vertical a mixed and an oblique design. As a result 39 brassieres were obtained. The experiment has been done for the 39 brassieres with 17 semantic differential bi-polar scales. The subjects were 60 female students majoring in clothing and textiles, The data was analyzed using the statistical SPSS package. The major findings of this research were as follows. 1. As a results of the factor analysis, 3 factors(Attractiveness Appearance. Cuteness) were found to be constructing factors for brassiere image. 2. There were significant differences in the visual evaluation of brassiere design especially in the change of lace. 3. As a result of the regression analysis the images affecting preferences were pretty fascinating natural appropriate sexy and clean.

• Fashion & Textile Research Journal
• /
• v.17 no.3
• /
• pp.429-439
• /
• 2015

This study develops a new brassiere for new silver women. A new brassiere design was developed for the silver generation based on apreliminary survey; subsequently, a wire and no-wire type of brassier were developed after a second fitting evaluation. The results were as follows. First, in terms of brassiere design, the cup shape was designed as mold type full cup, shoulder straps were designed as camisole type with cups, bias tape was designed for body correction in the side line and mash tape was designed for easy movement below the cups. On the other side ofthe cup shape was a pocketdesigned on a support pad forthe wire type and a support panel to serve as a wire in the no-wire type brassiere. Second, brassiere patterns were designed by referencing the educational H pattern. Thetotal length was elongated by 5cmto reduce pressure when wearing a brassiere and the height of the front center increased by 8cm for the stability of the front center of the brassiere. In addition, the side line was moved back by 3cm and the width of the brassiere wings was designed widely at 10.5cm. Third, a wearing test was conducted for the wire type and the no-wire type brassiere with comparison products, using a 7-point Likert scale. Appearance results and movement tests for the wire and no-wire type showed a higher score than comparison products.