• 산업기술연구
• /
• 제19권
• /
• pp.253-260
• /
• 1999

Two thermodynamic models were used to predict the partial molar volumes of solutes in supercritical carbon dioxide at infinite dilution: (1) the Peng-Robinson equation of state with various mixing rules including those based on $EOS/G^E$ (2) the Kirkwood Buff fluctuation integral with the hard sphere expansion (HSE) method. The Kirkwood-Buff fluctuation integral method, in which an equation of state for pure component and molecular parameters are required, produced better results especially near the critical point than the Peng-Robinson equation of state with the several mixing rules based an $EOS/G^E$. When the $EOS/G^E$ mixing rules were used, poorer results were obtained compared with the classical mixing rule and Kirkwood-Buff model.

• 한국응용과학기술학회지
• /
• 제28권2호
• /
• pp.178-184
• /
• 2011

The analysis of reaction kinetics provided that the reaction order was the $1^{st}$ of triglyceride and the rate constant was 0.067 $min^{-1}$. The transesterification of camelina oil using 0.6 wt% mixed catalyst which consists of 40 v/v% of potassium hydroxide (1 wt%) and 60 v/v% of tetra methyl ammonium hydroxide (0.8 wt%), was carried out at $65^{\circ}C$ on the tubular reactor packed with static mixer. The conversion was shown to be 95.5% at the 6:1 molar ratio of methanol to oil, flow rate of feed of 3.0 mL/min and 24 of element of static mixer. The volume of washing water emitted by 0.6 wt% mixed catalyst was the half of the volume emitted by 1 wt% potassium hydroxide.

• Korean Chemical Engineering Research
• /
• 제47권6호
• /
• pp.755-761
• /
• 2009

일반적으로 비등점의 차이가 큰 물질들은 그 물리적 성질의 차이로 인해 혼합물에서 비이상적인 상거동을 보이며, 이러한 혼합물의 상거동 특성을 이해하기 위해서는 정확한 실험적 데이터가 필요하다. 본 연구에서는 재순환 평형조가 포함된 기-액 상평형 장치를 사용하여 10, 30, 60 kPa에서 톨루엔과 크레졸 혼합물에 대한 정압 기-액 평형 실험을 행하였다. 측정한 기-액 평형 데이터는 NRTL과 UNIQUAC 모델식을 이용하여 잘 적합할 수 있었으며 Gibbs/Duhem 식에 근거한 열역학적 건전성 테스트를 수행하여 실험결과의 건전성을 확인하였다. 한편, 혼합물의 과잉몰부피를 측정하여 Redlich-Kister 다항식으로 나타내었다.

• 대한치과교정학회지
• /
• 제53권3호
• /
• pp.205-216
• /
• 2023

Objective: To investigate changes in the immature teeth of Sprague-Dawley rats during orthodontic treatment and to explore the changes in the peri-radicular alveolar bone through micro-computed tomography (CT). Methods: Twenty-five 26-day-old male Sprague-Dawley rats were included. The maxillary left first molar was moved mesially under a continuous force of 30 cN, and the right first molar served as the control. After orthodontic treatment for 7, 14, 21, 28, and 42 days, the root length, tooth volume, and alveolar bone mineral density (BMD) around the mesial root were measured through micro-CT. Results: The immature teeth continued to elongate after application of orthodontic force. The root length on the force side was significantly smaller than that on the control side, whereas the differences in the volume change between both sides were not statistically significant. Alveolar bone in the coronal part of the compression and tension sides showed no difference in BMD between the experimental and control groups. The BMD of the experimental group decreased from day 14 to day 42 in the apical part of the compression side and increased from day 7 to day 42 in the apical part of the tension side. The BMD of the experimental group decreased in the root apex part on day 7. Conclusions: The root length and volume of immature teeth showed continued development under orthodontic forces. Alveolar bone resorption was observed on the compression side, and bone formation was observed on the tension side.

• 한국세라믹학회지
• /
• 제25권4호
• /
• pp.415-423
• /
• 1988

Mixtures of carbon and silica (about 0.46${\mu}{\textrm}{m}$) which was synthesized by the hydrolysis of ethyl silicate, the molar ratio of silica/carbon was fixed as 1/10(weight ratio : 1/2), were nitrided in the temperature range 135$0^{\circ}C$~150$0^{\circ}C$. The phse of the product Si3N4 was $\alpha$ phase and the morphology was hexagnoal prism and the nitridation reaction was completed in 5 hrs at 150$0^{\circ}C$ or 7hrs at 145$0^{\circ}C$. The reaction rate above 150$0^{\circ}C$ was diffusion-controlled, following Jander equation. Activation energy Q was derived from the Arrhenius plot and the value was about 101kcal/mol. Axis ratio of Lattice constants(c/a) was 0.726 and unit volume was $\AA$3, the larger the molar ratio of carbon/Alkoxide was, the smaller the particle size of $\alpha$Si3N4 was.

• 한국환경과학회지
• /
• 제19권6호
• /
• pp.681-687
• /
• 2010

Mesoporous silica was prepared from hydrothermal synthesis using gel mixture of tetraethylorthosilcate (TEOS) as silica source and cetyltrimethylammonium bromide (CTMABr) as a surfactant. In the optimum synthesis cause, molar ratio of template and silica changed. The surface and structure properties of mesoporous silica were determined by XRD, SEM, TEM and BET. Also, surface potential of mesoporous silica was measured using zeta potential. $N_2$ adsorption isotherm characteristics, including the specific surface area ($S_{BET}$), total pore volume $V_T$), and average pore diameter ($D_{BJH}$), were determined by BET. As a result, SBET of $100m^2/g{\sim}1500m^2/g$ was determined from the $N_2$ adsorption isotherm. Also, the average pore diameter was 2 nm∼4 nm. Mesoporous silica's surface potential of minus charge was determined from zeta potential.

• Bulletin of the Korean Chemical Society
• /
• 제2권3호
• /
• pp.90-96
• /
• 1981

The significant structure theory of liquids has been successfully applied to the sodium ammonia solution. In applying the theory to sodium ammonia solution, we assumed there were four species in solution, i.e., sodium cation, solvated electron, triple ion, and free electron and equilibria existed between them. Based on these assumptions, we set up the model explaining the anomalous properties of sodium ammonia solution. The partition function for sodium ammonia solution is composed of the partition functions for the above four species and also for the Debye-Huckel excess free energy term. Agreements between calculated and experimental values of the thermodynamic quantities, such as molar volume, vapor pressure, partial molar enthalpy and entropy, and chemical potential as well as viscosity are quite satisfactory.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제15권2호
• /
• pp.69-76
• /
• 2015

Background: There have been few studies on the effect of an elevated concentration of lidocaine hydrochloride in the surgical removal of an impacted lower third molar. This study aimed to examine the efficacy of 4% lidocaine along with 1:100,000 epinephrine compared to 2% lidocaine along with 1:100,000 epinephrine as inferior alveolar nerve block for the removal of an impacted lower third molar. Methods: This single-blind study involved 31 healthy patients (mean age: 23 y; range: 19-33 y) with symmetrically impacted lower third molars as observed on panoramic radiographs. Volunteers required 2 surgical interventions by the same surgeon with a 3-week washout period. The volunteers were assigned either 4% lidocaine with 1:100,000 epinephrine or 2% lidocaine with 1:100,000 epinephrine as local anesthetic during each operation. Results: We recorded the time of administration, need for additional anesthetic administration, total volume of anesthetic used. We found that the patient's preference for either of the 2 types of local anesthetic were significantly different (P < 0.05). However, the extent of pulpal anesthesia, surgical duration, and duration of soft tissue anesthesia were not significantly different. Conclusions: Our study suggested that inferior alveolar nerve block using 4% lidocaine HCl with 1:100,000 epinephrine as a local anesthetic was clinically more effective than that using 2% lidocaine HCl with 1:100,000 epinephrine; the surgical duration was not affected, and no clinically adverse effects were encountered.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제18권6호
• /
• pp.339-347
• /
• 2018

Background: There are many techniques of inferior alveolar nerve block injection (IANBI); one among them is the computer-assisted intraosseous injection (CAIOI). Here we aim to evaluate the effectiveness of CAIOI with $Quicksleeper^{(R)}$ in mandibular third molar surgery. Methods: This study is a clinical, single-blind, randomized, split-mouth, controlled trial including 25 patients (10 males and 15 females, mean age 21 years). The patients underwent surgical removal of bilateral mandibular third molars with two different IANBI techniques. One side was injected using $Quicksleeper^{(R)}$, and the other side was injected using a conventional IANBI. Both techniques used one cartridge (1.7 ml) of 1:100,000 epinephrine 4% articaine. A supplementary injection was used if necessary. All volumes of anesthetic agent used were recorded. Statistical analysis was performed using paired t-test and Wilcoxon test. Results: This research showed that CAIOI has faster onset and shorter duration of action than IANBI (P < 0.05). The pain was similar in both techniques. In the CAIOI group, one-third of the cases could be completed without additional anesthesia. The remaining two-thirds required minimal supplementary volume of anesthesia. The success rates were 68% for CAIOI and 72% for IANBI, respectively. Conclusion: CAIOI is an advantageous anesthetic technique. It can be used as an alternative to conventional IANBI for mandibular third molar surgery.

• 한국안광학회지
• /
• 제7권2호
• /
• pp.27-31
• /
• 2002

4성분 $Li_2O-B_2O_3-Al_2O_3-SiO_2$ 유리들을 $R({\equiv}Li_2Omole%/B_2O_3mole%)$과 $K({\equiv}(Al_2O_3mole%+SiO_2mole%/B_2O_3mole%)$에 의해 제작하여 유리들의 구조를 굴절률 (refractive index)과 Vicker's 경도(hardness)의 변화를 측정하여 분석하였다. 먼저, 굴절률의 증가는 유리 내부구조의 분극률을 증가시키는 $Li^+$ 양이온 수의 증가에 우선적으로 의존하여 증가하였으며, 적은 양의 리튬 산화물($Li_2O$)이 첨가된 영역에서는 굴절률은 리튬 이온 양에 의존하며, 많은 양의 리튬 산화물이 첨가된 영역에서는 큰 몰 부피를 갖고 하나의 비가교 산소를 갖는 $BO_3{^-}$ 단위들의 형성으로 유리 구조 내의 몰 부피 증가로 유리들의 굴절률의 증가가 둔화되었다. 그리고 알루미늄 산화물($Al_2O_3$)과 규소 산화물($SiO_2$)의 증가에 따라 굴절률의 감소는 $Al_2O_3$와 $SiO_2$에 의해 형성되어진 $AlO_4$ 단위들과 $SiO_4{^-}$ 단위들이 붕소 산화물($B_2O_3$)에 의해 형성되어진 $BO_4$단위들보다 몰 부피의 증가로 감소되어졌다. 또한, 경도의 증가는 유리 망목구조에 형성되어지는 $BO_4$ 단위 수에 의존하였으며, 경도의 감소는 유리 망목구조를 개방화시키는 $BO_3{^-}$ 단위 수에 의존하여 감소함을 알 수 있었다.