• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.1
• /
• pp.22-28
• /
• 2011

Purpose: This article attempted to examine how teeth for restoration is made in a clinical practice and utilize it as future educational material of teeth formation and basic data for additional research. Materials and methods: This experiment investigated the models sent to milling center for production of zirconia crowns. After scanned with Lava CAD/CAM System (3M ESPE, Seefeld, Germany), they are measured on 'ImageJ (version 1.32j, National Institutes of Health, USA)' program and compared and analyzed. Convergence angle from mesio-distal surfaces and bucco-lingual surfaces of each teeth are measured. Also, bucco-lingual diameter of the region lowered as much as 0.4 mm from incisal edge in anterior teeth except canines.(This measure is defined as the Peak 0.4) The analysis of data between each group was conducted by Windows SPSS statistic program, and was proved significant on 95% confidence level by independent t-test, one-way ANOVA and multiple analysis (Sheff${\'{e}}$ test). Results: The mean value of convergence angle was $18.67^{\circ}$ It is ranked as molar ($26.70^{\circ}$) > premolar ($16.87^{\circ}$) > anterior teeth ($14.81^{\circ}$) in the order of mesio-distal convergence angle; anterior teeth ($22.32^{\circ}$) > molar ($20.93^{\circ}$) > premolar ($15.41^{\circ}$) in the order of bucco-lingual convergence angle. The mean value of Peak 0.4 was 1.18 mm. Conclusion: Convergence angle of abutment of zirconia all ceramic crown has difference depending on the location in the arch. Due to the nature of production of zirconia all ceramic crown, convergence angle of abutment and line angle finishing degree can have an effect on internal suitability of restoration.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.4
• /
• pp.644-648
• /
• 2005

Supernumerary tooth was resulted from excessive proliferation of dental lamina and associated with familial tendency and a congenital syndrome such as Cleidocranial dysostosis or Gardner's syndrome. Incidence reports identify a range of $0.3{\sim}0.8%$ in primary dentition, $1.0{\sim}3.5%$ in permanent dentition with males being affected twice as frequently as females, maxilla nine times as frequently as mandible. The most common supernumerary tooth is the mesiodens, which located between the maxillary central incisors, and the next common site is the fourth molar and lateral incisors. Supernumerary teeth are uncommon in the mandible, but premolars are the most common supernumerary teeth and occurrence is very rare in the incisor region of the mandible and the incidence is 2%. We need a early diagnosis and appropriate treatment plan because of possiblilty of diastema and eruption failure displacement, rotation of the associated permanent teeth, root resorption and dentigerous cyst with presence of the supernumerary teeth. In this two case, one supernumerary tooth located in the mandibular incisor region, the other supernumerary tooth located in premolar region. We could get normal alignment of mandibular dentition by extraction and orthodontic treatment.

• The korean journal of orthodontics
• /
• v.10 no.1
• /
• pp.71-79
• /
• 1980

The purpose of this study was (1) to determine the prevalence of some causes by which dental occlusion might be affected , (2) to determine the prevalence of malocclusion, and types of molar, vertical incisor and horizontal incisor relationships, and (3) to examine the sex difference in the prevalence ratios, and (4) to determine the between-examiner differences in assessing types of dental occlusion. The material consisted of 1281 males and 811 females, total 2091 persons, aged 17 to 21 years. Two examiners who were graduate students in the orthodontic course, examined independently dental occlusion of the material. Before calculating the statistics, the subjects consisted of 156 mates and 164 females, total 320 persons, haying any one or more causes suspected to affect dental occlusion, was eliminated. Then the remained subjects, 1124 males and 647 females, total 1771 persons, were assessed. The results were as follows 1. The prevalence of some causes by which dental occlusion might be affected was 15.32 per cent. The missing rate of any one or more first molars was 8.85 percent, that of any one or more teeth positioned anterior to the first molar was 3.83 per cent. The prevalence of crossbite of the first molar was 0.48 per cent, that of retained primary teeth was 0.77 percent, and that of orthodontic treatment was 0.43 per cent. 8. The rate of between-examiner difference was 12.53 per cent in assessing the types of molar relationship, 18.86 percent in assessing the types of horizontal incisor relationship, and 26.37 percent in assessing the types of horizontal incisor relationship. 3. There was no sex difference in the prevalence ratios of the types of molar relationship. The prevalence of Class I molar relationship was 80.91 percent, that of Class II was 5,03, that of Class II subdivision was 4.01, Percent, that of Class III was 5.99 percent and that of Class III subdivision was 4.07 percent. 4. In the prevalence of the types of horizontal incisor relationship, there were no sex differences except that of Class II division 2. The prevalence of Class I horizontal incisor relationship was 73.12 percent, that of Class II division t was 12.03 percent, that of Class II division 2 was 6.58 percent in male and 4.33 percent in female, and that of Class III was 9.09 percent. 5. In the prevalence of the types of vertical incisor relationship, there were no sex differences except that of deep bite, The prevalence of open bite was 2.20 per cent, that of edge-to-edge bite was 9.15 percent, that of normal bite was 76,34 percent, and that of deep bite was 14.15 percent in male and 9.12 percent in female. 6. There was no sex difference in the prevalence of malocclusion the prevalence of malocclusion was 82.67 percent and that of normal occlusion was 17.33 percent. 7. There was a tendency that when Class I molar relationship changed to Class II, incisor relationships were to be larger overjet or upright upper incisors and deep bite, but when that changed to Class III molar relationship, these were to be cross bite and openbite.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.28.1-28.6
• /
• 2016

Backgrounds: Insufficient intermaxillary space is caused by non-restoration following tooth extraction in the past, and this involves eruption of the opposing teeth and changes of the arch structure. Such cases are difficult just by a simple prosthetic approach, and diversified treatment plans should be established. Among these, posterior maxillary segmental osteotomy (PMSO) is an efficient treatment option than extraction of opposing teeth as it surgically repositions multiple erupted teeth and alveolar bone. PMSO can preserve the natural teeth; therefore, it is being regarded as a treatment method which can improve insufficient intermaxillary space significantly. Case presentation: In this case report, the first patient received PMSO in order to place an implant in the mandibular edentulous space after decreased vertical dimension is restored, and the second patient received PMSO along with orthodontic treatment to obtain the intermaxillary space and balance the interarch molar width. Conclusion: PMSO is the treatment of choice when occlusion is compromised in the presence of decreased vertical dimension or arch length discrepancy.

• Restorative Dentistry and Endodontics
• /
• v.3 no.1
• /
• pp.7-11
• /
• 1977

One hundred and thirteen human mandibular first molars were injected with china ink, decalcified, cleared and used in study, in vitro, to determine the number of root, the number of root canals, canals per root, frequency and location of transverse anastomoses, frequency and location of lateral canals and frequency of the apical deltas. The results were as follows; 1. Most of the teeth showed three canals, but 21. 25% of the teeth were found to have two canals and 21. 25% of them four canals. 2. In so far as observing two canals per root, 77.0% of teeth were found to have two canals in mesial root and 25.7% of them in distal root. 3. In roots with two canals, the separated apical foramen appeared 59.8% in mesial side and 40.0% in distal side, and the common apical foramen 40.2% in mesial side and 60.0% in distal side. 4. Of the two root canals in one root, 37.3% of the canals were found to have transverse anastomoses and were usually located in the apical third of the root. 5. 25.7% of 113 teeth were found to have lateral canals, and ramifications were mainly located in the apical third of the root.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.1
• /
• pp.144-155
• /
• 1995

It is well known that implants showing no clinical mobility are successfully osseointegrated and have good prognosis. When implants are under load, their mobility begins to increase. It is of necessity to substantiate whether excessive load is on or premature occlusal force is acting prior to desirable osseointegration. Using Periotest unit, we could measure the pattern of mobility change. Consequently, osseointegrated treatment has come to success by intercepting progressive mobility and doing perceptive treatment according to the result of Periotest Value(PTV). In this study, we took records of intangible mobility of 70 osseointegrated implants. And we also measured the mobility of periodontally sound natural teeth as a standard from 30 dental personnel. Conclusions were summarized as followings ; 1. Lower lateral incisor has the highest PTV, whereas lower canine, upper canine, lower premolars and lower 1st molar have the lowest PTV in natural dentition. 2. There are little significant statistical difference of PTV between men and women in both(natural and implant) dentition. 3. In general, lower natural teeth show lower PTV than upper counterpart. 4. Mandibular implants have lower PTV than those of maxillary implants. 5. All of the successfully osseointegrated implants have lower PTV than those of periodontally healthy teeth.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.4
• /
• pp.422-432
• /
• 2019

Treatment options for impacted permanent molars include orthodontic traction, surgical repositioning, transplantation, and extraction of the impacted teeth. Orthodontic traction is recommended because it is the most conservative method. However, it has limitations, such as loss of tooth anchorage. In an effort to overcome these limitations, skeletal anchorage devices tailored for orthodontic use were developed. In this case report, 3 patients were diagnosed with impacted permanent molars. The impacted teeth of these patients were surgically exposed, the orthodontic devices were attached, and the skeletal anchorage devices were implanted for the successful traction of the impacted teeth.

• The Journal of Korean Academy of Prosthodontics
• /
• v.18 no.1
• /
• pp.99-109
• /
• 1980

An investigation was made Into 1,357 fixed bridges which had been performed at the Department of Prosthetic Dentistry, Seoul National University Hospital from 1973 to 1979. The purpose of this investigation was to establish a basic reference of the treatment with fixed bridges by obtaining statistical conclusions from the data concerning the patients who had been treated with fixed bridges. The following conclusions were obtained; 1. The ratio of the fixed bridges made on the maxillae to those made on the mandible was 1:1. 2. The cases of fixed bridges with one pontic were the most frequent, i.e., 946 cases out of total 1,357 cases, which were 69.7% of the total. 3. As the number of missing teeth increased, the number of the relevant cases of fixed bridges decreased. 4. The most frequent age group of the patients who had been treated with fixed bridges was the twenties, which was 40.8% of the total. As the age of the patients increased, the number of corresponding cases of fixed bridges decreased. 5. Most of the fixed bridges with more than three pontics were made at the anterior portion samely on the maxilla and on the mandible. 6. As for the retainers, the porcelain fused to metal crown and the partial veneer crown were frequently used at the anterior portion, while the full veneer crown was frequently used and the inlay and the attachment were used in some cases at the posterior portion. The locations of fixed bridges in the order of their frequency were: canine, lateral incisor, second bicuspid, central incisor, second molar, first bicuspid, first molar, and third molar on the maxilla; second bicuspid, second molar, first bicuspid, first molar, canine, third molar, lateral incisor, and central incisor on the mandible.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.23 no.4
• /
• pp.213-220
• /
• 2023

Background: Third molar extraction is the most commonly performed minor oral surgical procedure in outpatient settings and requires regional anesthesia for pain control. Extraction of the maxillary molars commonly requires both posterior superior alveolar nerve block (PSANB) and greater palatine nerve block (GPNB), depending on the nerve innervations of the subject teeth. We aimed to study the effectiveness of PSANB alone in maxillary third molar (MTM) extraction. Methods: A sample size comprising 100 erupted and semi-erupted MTM was selected and subjected to study for extraction. Under strict aseptic conditions, the patients were subjected to the classical local anesthesia technique of PSANB alone with 2% lignocaine hydrochloride and adrenaline 1:80,000. After a latency period of 10 min, objective assessment of the buccal and palatal mucosa was performed. A numerical rating scale and visual analog scale were used. Results: In the post-latency period of 10 min, the depth of anesthesia obtained in our sample on the buccal side extended from the maxillary tuberosity posteriorly to the mesial of the first premolar (15%), second premolar (41%), and first molar (44%). This inferred that anesthesia was effectively high until the first molars and was less effective further anteriorly due to nerve innervation. The depth of anesthesia on the palatal aspect was up to the first molar (33%), second molar (67%), and lateromedially; 6% of the patients received anesthesia only to the alveolar region, whereas 66% received up to 1.5 cm to the mid-palatal raphe. In 5% of the cases, regional anesthesia was re-administered. An additional 1.8 ml PSANB was required in four patients, and another patient was administered a GPNB in addition to the PSANB during the time of extraction and elevation. Conclusion: The results of our study emphasize that PSANB alone is sufficient for the extraction of MTM in most cases, thereby obviating the need for poorly tolerated palatal injections.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.5
• /
• pp.349-354
• /
• 2011

Introduction: Mandibular third molar extraction is one of the most common procedures performed in oral and maxillofacial surgery units. Although the overall complication rate is low with most complications being minor, mandibular third molar removal is so common that the population morbidity of complications might be significant. Therefore, efforts to limit intraoperative or postoperative complications might have a significant impact in terms of enhancing the patient outcome. The aims of this study were to identify the position and angulation associated complications after mandibular third molar extractions. Materials and Methods: This study surveyed 568 patients who had a mandibular third molar extracted, showed clinical complications and underwent a radiographic measurement of the available space, depth and spatial relationship. Results: The results obtained were as follows: 1. The complications were a dry socket, nerve injury, root rest, infection, bleeding, hamatoma, and adjacent teeth injury. 2. There were no significant differences between the complication and ramus relationship (available space) of the mandibular third molar. 3. There were no significant differences between the complications and depth of the mandibular third molar. 4. There were no significant differences between the complications and spatial relationship of the mandibular third molar. Conclusion: There were no significant differences in the complication rate, ramus relationship, depth and spatial relationship of the mandibular third molar. This suggests that the position and angulation of the mandibular third molar may not have an impact on the complications. The relationship between the position and angulation of the mandibular third molar, and complications deserves a further study using longitudinal data.