• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제28권5호
• /
• pp.341-347
• /
• 2002

This study was designed to determine the location of the mandibular canal on lower molar areas. Thirty-three patients were examined with multi-planar reformatted CT scan($Dentascan^{(R)}$). Three kinds of measurements were performed. The first was the distances between the upper border of the mandibular canal and the root apices of the first and second molars, the second was the distance between the cortical plate of the mandible and mandibular canal, and the last was the location of the mandibular canal in the buccolingual plane. The obtained results are as follows 1. The distance between the root apices of lower molars and the superior border of mandibular canal was largest at the mesial root of the first molar, and shortest at the distal root of the second molar(p<0.05). 2. The longest distance between the outer surface of the buccal cortical plate of the mandible and mandibular canal was measured from the distal root of the second molar, and this distance decrease gradually mesially(p<0.05). 3. The distance between the mandibular base and inferior border of mandibular canal was longest at the distal root of the second molar, and shortest at the mesial root of the first molar(p<0.05). 4. The location of mandibular canal was lingually positioned in relation to the axis of teeth and alveolar ridge in molar areas.

• 구강회복응용과학지
• /
• 제16권2호
• /
• pp.93-104
• /
• 2000

Orthodontic treatment in conjunction with second-molar extraction has been a controversial issue among orthodontists over many decades. The aim of this study was to investigate the treatment effects of upper second molar extraction cases. The sample included 19 upper second molar extraction orthodontic cases(ten Angle's Class I's and nine Class II's, average age=13Y 6M) cared at Kyung-Hee University Department of Orthodontics. Lateral cephalometric radiographs were taken before and immediately after treatment. Seventy-nine points were digitized on each cephalogram and 38 cephalometric parameters were computed comprising 22 angular measurements, 13 linear measurements, and 3 facial proportions. The data obtained from each malocclusion group were analyzed by paired t-test. The statistical results disclosed that there was no significant change in skeletal pattern after treatment except for that accountable by growth while there was statistically significant change in dentoalveolar and soft tissue patterns. There were no significant changes in Bjork sum, posterior facial height /anterior facial height and lower anterior facial height /anterior facial height. No significant changes in anteroposterior position of maxilla and palatal plane were manifested. Although facial axis and lower facial height was slightly increased and the mandible was rotated backward and downward, there was no remarkable change in the mandibular plane. There were statistically significant changes in distal movement of upper first molar, molar key correction and overjet reduction while there was no change in the occlusal plane. The upper lip was slightly retracted simultaneously with slight increase in nasolabial angle. These results signify that distalization of upper dentition with the second molar extraction does change occlusal relationship without gross modifications in the craniofacial skeletal configurationson. Henceforth the second molar extracted would be recommended to treat severe anterior crowding and protrusion with minor skeletal discrepancy.

• Restorative Dentistry and Endodontics
• /
• 제46권2호
• /
• pp.29.1-29.11
• /
• 2021

Objectives: This study was conducted to compare the post-fracture survival rate of endodontically treated molar endodontically treated teeth (molar ETT) restored with resin composites or crowns and to identify potential risk factors, using a retrospective cohort design. Materials and Methods: Dental records of molar ETT with crowns or composite restorations (recall period, 2015-2019) were collected based on inclusion and exclusion criteria. The incidence of unrestorable fractures was identified, and molar ETT were classified according to survival. Information on potential risk factors was collected. Survival rates and potential risk factors were analyzed using the Kaplan-Meier log-rank test and Cox regression model. Results: The overall survival rate of molar ETT was 87% (mean recall period, 31.73 ± 17.56 months). The survival rates of molar ETT restored with composites and crowns were 81.6% and 92.7%, reflecting a significant difference (p < 0.05). However, ETT restored with composites showed a 100% survival rate if only 1 surface was lost, which was comparable to the survival rate of ETT with crowns. The survival rates of ETT with composites and crowns were significantly different (97.6% vs. 83.7%) in the short-term (12-24 months), but not in the long-term (> 24 months) (87.8% vs. 79.5%). Conclusions: The survival rate from fracture was higher for molar ETT restored with crowns was higher than for ETT restored with composites, especially in the first 2 years after restoration. Molar ETT with limited tooth structure loss only on the occlusal surface could be successfully restored with composite restorations.

• 대한소아치과학회지
• /
• 제32권1호
• /
• pp.89-100
• /
• 2005

형태학적으로 아주 유사한 상, 하악 제2유구치와 제1대구치의 교합면 형태를 분석하고자 정상교합의 유치열기 아동(Hellman dental age II A) 100명(남자 50명, 여자 50명)과 영구치열기의 성인(Hellman dental age IV A) 86명 (남자 43명, 여자 43명)을 대상으로 하였다. 상, 하악 제2유구치와 제 1대구치의 상, 하악 석고모형의 3차원 형상 data로부터 각 교두정간 거리, 교두정을 최소한의 오차로 지나는 평면과 교합면사이의 체적, 평면에서 교두정간 까지의 방향별 Section curve를 구하여 다음과 같은 결론을 얻었다. 1. 형성된 표준평면과 각 교두정과의 거리에 관한 오차는 하악 제2유구치에서 남자 0.05-0.09mm, 여자 0.04-0.09mm로서 제일 작았다. 2. 각 교두정간의 거리는 하악 제2유구치와 제 1대구치 에서 남자가 크게 나타났다. 특히 제2 유구치에서는 유의성이 존재하였다(p<0.05). 3. 남녀 모두에서 사주 교두거리를 제외하고, 상악 제2유구치는 원심 협측교두와 설측교두 사이가, 하악 제2유구치는 원심교두와 원심 설측교두 사이가, 상악 제1대구치는 근심 설측교두와 협측교두 사이가, 하악 제1대구치는 원심 설측교두와 근심 설측교두 사이의 거리가 가장 크게 측정되었다. 4. 제2유구치와 제1대구치에서 교합면 체적은 하악에서 크게 나타났고, 영구치가 1.40-1.75배 값을 보였으며(p<0.05), 남녀간에는 남자가 큰 값을 보이긴 하였지만 통계적인 유의성이 없었다. 5. 대부분의 경우 유치열에서 보다 영구치열에서 section curve가 넓고 깊었으며 교두사이의 사선거리를 제외하고 상악의 경우 근심 협측과 설측교두 사이에서 유치열과 영구치열 모두에서 가장 깊은 section curve를 이루었으며 하악에서는 영구치열은 원심 협측과 원심교두사이 유치열은 원심 설측과 원심교두 사이에서 가장 깊은 section curve를 이루었다.

• 대한치과의사협회지
• /
• 제10권2호
• /
• pp.129-130
• /
• 1972

The author have observed a case of supernumerary molar occurred in the buccally between second and third molar of the mandibular in 38 years old. The macroscopical findings were resembled to small second lower premalar.

• 대한치과의사협회지
• /
• 제17권7호통권122호
• /
• pp.525-528
• /
• 1979

958 healthy Korean children aged from 2 to 11 years old (male: 500 female:458) were studied on the root resorption of the mandibular first deciduous molar. The Results were as follows: 1. The resorption of mandibular first deciduous molar in female was earlier than male. 2. The patterns of the initial resorption of mandibular first deciduous molar were as follows Distal root is resorbed by the Successor ; 55.92% Both roots are resorbed by the Successor simultaneously ; 30.51% Mesial root is resorbed by successor ; 6.33% Mesial root is resorbed by the mandibular first bicuspid and canine ; 4.08% Bifurcation area is resorbed by the successor; 3.16% 3. The Exfoliation period of mandibular first deciduous molar was 10 years 1month in female and 10 years 4 months in male.

• 치과방사선
• /
• 제16권1호
• /
• pp.19-24
• /
• 1986

The author performed radiographical analysis of the third molar dentition and characteristic relation to anatomical oral structure. For this purpose 506 orthopantomagraph film, male 283cases and female 223 cases, aged from 15 to 30 years were evaluated by means of Winter's classification in conjunction with some other methods. Through the study following results were obtained; 1. The eruption of(equation omitted) were found in 229 cases followed by 61 cases of(equation omitted) and 45 cases showed no evidence of eruption. 2. The classification based on the relation of ramus to distal portion of the 2nd molar revealed class Ⅱ, 460 cases (61.8%) and 182 cases (24.5%) were class Ⅲ. 3. Parallelism between long axis of mandibular third molar and the second molar were found in 302 cases (40.8%) and mesial inclination of the third molar were 280 cases (37.6%). 4. Average inclination degree among these cases showed 138.62±12.56°.

• 한국응용과학기술학회지
• /
• 제24권3호
• /
• pp.246-252
• /
• 2007

$BaTiO_3$ powders were prepared by sol-gel method from different concentration of KOH aqueous solution and Ba/Ti molar ratio. Particle shape, size and crystal structure of prepared $BaTiO_3$ powders were analyzed by SEM, XRD, and FT-IR. As the result of KOH concentration changing, spherical particles were obtained by condition more than 3 M and particle size decreased as concentration increasing. Different appearance showed between dried and sintered powders against changing of Ba/Ti molar ratio. In case of dried powders, the crystallinity decreased as molar ratio increasing. On the other hand, increased as molar ratio increasing in case of sintered powders.

• 접착 및 계면
• /
• 제7권4호
• /
• pp.45-52
• /
• 2006

Five low molar ratio urea-formaldehyde (LUF) resins were synthesized in this study. The effects of molar ratio, free formaldehyde content, and catalysts on the curing characteristics of LUF resins were studied by measuring its free formaldehyde content, pH value change after catalysts added, curing rate, and pot life, observing its cured appearance, and analyzing its thermal behavior. The results indicate that: 1) The LUF resin with lower molar ratio than 1.0 can still cure; 2) Free formaldehyde content is not the main factor in affecting curing rate of LUF resin; 3) Compared with ammonium chloride as a traditional catalyst, persulfate salts markedly accelerate the curing rate of LUF resin, and result in the different appearance; 4) the addition of sodium chloride to catalysts can accelerate the curing rate of LUF resin, but the effect is moderate.

• 대한치과의사협회지
• /
• 제42권1호통권416호
• /
• pp.7-14
• /
• 2004

Molar extrusion is a quite common problem in prosthodontic patients. It is caused due to the loss or infraocclusion of opposing teeth. A more conservative approach than reduction of the coronal part of extruded tooth is to intrude the malaligned molar orthodontically. Several authors have presented the cases of molar intrusion, by cither removable or fixed appliances. However, the design of those appliances was complex so that many teeth were included as an anchorage unit. This increased the patient's discomfort inevitably. Moreover, the results could be unpredictable. Instead of these conventional methods, skeletal anchorage has been suggested for ideal force system to intrude a molar without any side effects. Many recent clinical reports presented the cases using microscrew or miniplate as a direct anchorage, which included some limitation. The purpose of this report is to introduce the indirect skeletal anchorage for intrusion of extruded maxillary molar.