• Current Research on Agriculture and Life Sciences
• /
• 제10권
• /
• pp.41-47
• /
• 1992

목재투습성에 관하여 다음과 같은 결과가 밝혀졌다. 1) 시편두께 0mm에 외삽한 투습저항값이 정(正)이므로 목재표면에서의 수분전달현상을 고려함이 인정되었다. 2) 목재내부의 함수율분포는 함수율 9%를 경계로 두 개의 직선으로 나타났다. 또 시편양측의 공기중 평형함수율이 9%이상일 때는 한 개의 직선으로 나타났다. 수분확산계수는 함수율 9%를 경계로 두 개의 일정한 값을 가지며, 이 값들은 오직 함수율에만 관계한다. 4) 수분이동량은 목재내의 함수율구배에 의존한다. 4) 목재의 수분전달계수는 시편두께에 의존하였다. 이 현상의 기구에 대해서는 아직 알 수 없다.

• 한국가구학회지
• /
• 제19권6호
• /
• pp.447-451
• /
• 2008

This study was carried out to know the difference of vapor transmission on the thickness of Paulownia wood(Paulownia tomentosa). The behavior of moisture transmission of wood thickness direction is generally estimated by vapor permeability and vapor transmission resistance. In general, Paulownia wood is known to use of inside material for furniture making, because of the excellent ability of vapor adsorption and/or desorption. Quarter sawing Paulownia wood material is prepared and the thickness is 6.0mm, 7.0mm, 8.0mm, 9.0mm, 10.0mm, respectively. The measurement of vapor transmission were conducted by the "cup method" in accordance with JIS(Japanese Industrial Standard) Z-0208. The experiment was made in the condition of 49.8mmHg vapor pressure difference and $40^{circ}C$ at constant temperature. From the experiment results, it was considered that Paulownia wood is very stable on moisture variation and any other material conditions. In this experiment we found that the vapor permeability and vapor permeance was reduced with the increase of wood thickness to vapor direction and vapor transmission resistance and specific vapor transmission resistance was increased with the increase of wood thickness to vapor direction. Besides moisture contents of adsorption and desorption side were about 5 percent and 14 percent, respectively. Mean value was 9.5 percent and about 10 percent in dry oven method. Moisture gradient was reduced with the increase of wood thickness for a small moisture difference of adsorption and desorption side.

• Journal of the Korean Wood Science and Technology
• /
• 제20권3호
• /
• pp.21-27
• /
• 1992

The amount of moisture transmitted under four different humidity conditions was measured in earlywood and latewood for Cryptomeria japonica(LT specimens). The results obtained are summarized as follows. The vapor permeability in eariywood was about three times larger than that of latewood. The vapor permeabilities in earlywood and late wood depended on the average moisture content of the wood. This indicates that moisture transmission is influenced by vapor permeability or vapor-transmission resistance, but the values obtained by experiments do not have great adaptability for practical situations because of changes in the experimental conditions. There fore, it is necessary to know the moisture content along the flow direction in order to explain the moisture transmission of wood. The vapor permeability was calculated using the density in air dried wood. These were then compared with the experimental values. The vapor permeabilities calculated with this density in the radial direction(LR specimen) had a good tendency to agree with the experimental values, but not so in tangential direction(LT specimen).

• 펄프종이기술
• /
• 제33권4호
• /
• pp.15-20
• /
• 2001

The function of the moisture-proof paper is to prevent moisture from adsorbing into the packed goods. Water-vapor transmission rate of the moisture-proof paper should be less than 100g/$m^2$.24hr and the optimum rate would be less than 50g/$m^2$.24hr. In general the moisture-proof paper has been made by laminating polyethylene or polypropylene on top of the base paper. However this kind of moisture-proof paper has a problem in recycling so that it brings about environmental pollution. In general the moisture-proof paper has been made by laminating polyethylene or polypropylene on top of the base paper. However this kind of moisture-proof paper has a problem in recycling so that it brings about environmental pollution. The purpose of this paper was to make moisture-proof paper using the mixture of SB latex and wax emulsion which was recyclable and environmentally friendly. Water vapor transmission rate showed less than 50g/$m^2$.24hr in mixture ratio of 85:15, 87:13, 90:10. Especially the mixture ratio of 87:13 showed the most favorable water-vapor transmission rate. However, the moisture-proof layer was destroyed slightly by folding in packing. It has been observed that there was no close relationship between water-vapor transmission rate of the moisture-proof paper and grammage of the base paper, but the density of base paper had influenced on water vapor transmission rate. It was also observed that the moisture-proof paper could be recycled. The moisture-proof paper was similar to base paper in degree of the pulping, and there was no significant difference in dispersion between moisture-proof paper and base paper. Most of wax particles which caused the spots during drying process could be removed by flotation process. Tensile strength and tear strength of both moisture-proof paper and base paper after pulping were measured to examine the fiber bonding, and no significant difference in physical properties was observed.

• Journal of the Korean Wood Science and Technology
• /
• 제24권1호
• /
• pp.75-80
• /
• 1996

The purpose of this study is to clarify the mechanism of moisture transfer depend on the thickness of the spruce(Picea sitchensis Carr.). Therefore, as the basic research of moisture transmission, the amount of moisture transmission and the moisture distribution in specimens and temperature of it's surfaces in vapor transmission process were investigated. The experiment was conducted in a steady state. and the moisture distribution was measured by knife cutting and weighing the specimens. The following conclusions were obtained ; 1. It can be found that distribution of moisture in the specimen can be approximated by two different straight lines intersecting at nine or ten percent moisture content. The amount of moisture movement defends on the gradient of moisture in the wood. 2. It is investigated that the wood surface moisture contents(MCs) are less for thinner specimens than for thick ones on the absorption side. On the other hand, the wood surface MCs are greater for thinner specimens than for thick ones on the desorption side. The main factor that affects the EMC of wood would be temperature when the relative humidity of atmosphere is constant. The specimen generate heat with the absorption and desorption process. In addition, the velocities of moisture transmission varied with the thicknesses of specimens. If the temperature of wood becomes greater, its MC decreases. Then the difference between surface MC and EMC of adsorption and desorption side becomes greater for thinner specimens. Therefore it is considered that the coefficients of moisture transfer decreases with the increases of the specimens' thicknesses.

• Journal of the Korean Wood Science and Technology
• /
• 제28권2호
• /
• pp.10-18
• /
• 2000

초음파를 이용한 목재의 비파괴시험은 등급구분 수분 및 결점 탐지, 썩은 정도 평가 등의 용도에 적용되고 있다. 이와 같은 기술을 실제로 적용하기 위해서는 목재 내의 초음파 전달과 목재의 성질 사이의 관계에 대한 기본적인 연구가 선행되어야 한다. 이 연구에서는 함수율과 섬유경사각이 초음파 전달 속도에 미치는 영향을 분석하기 위하여 낙엽송과 소나무를 대상으로 초음파 비파괴시험을 실시하였다. 함수율에 대한 시험을 위한 시험편은 생재상태, 30%, 20%, 10% 및 전건상태의 함수율을 갖도록 준비하였고 섬유경사각에 대한 시험을 위해서는 접선방향으로 0, 15, 30, 45, 60, 75 및 90도의 섬유경사각을 갖는 시험편을 준비하였다. 초음파 전달 속도는 섬유포화점에 근사한 30% 이하의 낮은 함수율 범위에서는 함수율에 반비례하였으며 이보다 높은 함수율 범위에서는 함수율에 관계없이 일정한 경향을 나타내었다. 목재의 압축강도와 함수율 사이의 관계에서도 이와 유사한 경향이 관찰되었다. 목재의 섬유경사각도 초음파 전달 속도 및 압축강도와 반비례하는 경향을 나타내었다. 압축강도와 초음파 전달 속도 사이의 관계는 정비례하는 관계로서 하나의 직선식으로 나타낼 수 있었다.

• 동아시아식생활학회지
• /
• 제23권4호
• /
• pp.461-469
• /
• 2013

This research is performed to investigate the changes in the physicochemical properties and microbial growths of seasoned anchovies with various packaging materials (PET/CPP : polyethylene terephthalate/cast polypropylene, PET/EVOH : polyethylene terephthalate/ethylene-vinyl alcohol, PET/AL/LDPE: polyethylene terephthalate/aluminum/low density polyethylene), which are stored at various temperatures (25, 35, $45^{\circ}C$) for 60 days. Generally, it is being observed that changes in physicochemical properties (i.e., moisture content, color, brown intensity, TBA value, TMA, VBN etc) of seasoned anchovies are significant when stored at higher temperatures. Particularly, the packaging materials are found to influence substantially on the physicochemical properties of seasoned anchovies. With packaging materials of high oxygen transmission rates and moisture vapor transmission rates (i.e., PET/CPP), the changes in physicochemical properties of seasoned anchovies are significant, while being low with low oxygen transmission rates and low moisture vapor transmission rates (i.e., PET/EVOH). In addition, results of microbial growths in seasoned anchovies show that significant increases in total aerobic bacteria counts (about 100-fold after 60 day of storage) are observed in samples with packaging materials of high oxygen transmission rates and moisture vapor transmission rates (i.e, PET/CPP), while with only small increases for samples of low oxygen transmission rates and low moisture vapor transmission rates (i.e., PET/EVOH). Based on the changes in the physicochemical properties and results of microbial growths, it is being concluded that PET/EVOH film is suitable for the packaging of seasoned anchovies.

• Journal of Biosystems Engineering
• /
• 제24권3호
• /
• pp.235-242
• /
• 1999

This study was conducted to develop a grain moisture meter using microwave free space transmission technique at X-band frequency. The 10.5GHz microwave oscillator using a dielectric resonator was designed and fabricated to transmit electromagnetic wave through standard horn antenna to a sample holder with the wetted Hwasung and Chuchung rough rice(12.00∼26.25%). To detect the output voltage of transmitted wave from receiving horn antenna, the detector was composed of shottkey diode and RF impedance matching circuit. The regression model for measurement of grain moisture content was developed. Its correlation coefficient and standard error of prediction (SEP) were found to be 0.9882 and 0.657 respectively between measure and predicted moisture contents.

• 한국콘텐츠학회논문지
• /
• 제15권1호
• /
• pp.324-330
• /
• 2015

초음파 전파 매개물은 초음파의 손실 없는 투과력을 위한 1차적인 목적 이외에 피부위에서 탐촉소자의 부드러운 이동을 위한 부가적인 목적이 있다. 본 연구는 진단용 초음파의 고분자 수화젤, 에멀전, 오일젤의 제형이 다른 초음파 전파매개물이 갖는 피부 윤활성, 피부 보습성, 건조속도 등의 초음파 매개물의 특징을 측정하여 이미 상용화 된 기성품과 비교하였다. 마찰계수는 고점도 에멀전에서 가장 높았으며 저점도 에멀전에서는 고분자 수화젤의 평균 마찰계수와 큰 차이를 보이지 않았다. 제제의 건조속도는 고분자 수화젤이 가장 높았으며 오일 함유량이 많을수록 수분증발이 나타나지 않았다. 피부수분함량에서는 저점도 에멀전이 높은 수분함량을 나타냈으며 수분함량 감소 정도가 가장 완만히 나타났다. 오일성분을 적절히 사용한 에멀전 형태의 초음파 전파매개물은 피부 보습효과, 피부 유연작용의 피부 건강측면과 피부-탐촉소자간의 피부 윤활성면에서 효과적인 제형임을 알 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제28권2호
• /
• pp.3-9
• /
• 2000

투습조건이 다른 경우에 있어서, 목재의 두께를 동일하게 하여 목재내부의 함수율분포 및 함수율의존성을 조사하였다. 시험편은 소나무재로 직경 70mm, 두께 20mm 인 정목판재를 이용하였다. 실험은 JIS Z-0208규정에 의거하여 10가지 종류를 선정하여 실시하였다. 목재내 함수율분포는 함수율 10%위치를 경계로 두 개의 직선으로 나타났다. 한편, 10%보다 높거나 낮을때는 한 개의 직선으로 나타났다. 따라서 함수율 10%값은 목재나 실험조건과는 상관없이 나타나는 것으로 생각되었다. 10%는 수분흡착에너지가 변화하는 경계점으로 추정되었다. 전보에서 일정한 실험조건에서는 목재의 두께에 상관없이 일정한 값을 나타내었지만, 본 연구에서 확산계수는 실험조건에 따라 수분경사로 구한 확산계수는 목재함수율에 따라 다양하게 나타났다.