• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.5
• /
• pp.391-398
• /
• 2013

Soil organic carbon (SOC) has the potential to promote the soil quality for sustainability and mitigation of global warming. There is little information on organic carbon composition despite of having resistance of carbon degradation in soil. In this study, to understand the effect of volcanic ash on organic carbon composition and quantity in soil, we investigated characteristics of volcanic soil and compared organic carbon composition of soil and humic extract by using $^{13}C$-CPMAS-NMR spectra under soil profiles of Namweon series in Jeju. SOC contents of inner soil profiles were 134.8, 101.3, and 27.4 g C $kg^{-1}$ at the layer of depth 10-20, 70-80 and 90-100 cm, respectively. These layers were significantly different to soil pH, oxalate Al contents, and soil moisture contents. Alkyl C/O-alkyl C ratio in soil was higher than that of humic extracts, which was decreased below soil depth. Aromaticity of soil and humic extract was ranged from 29-38 and 24-32%, which was highest at the humic extract of 70-80 cm in soil depth. These results indicate that the changes of SOC in volcanic ash soil resulted from alteration of organic composition by pyrolysis and stability of organic carbon by allophane in volcanic ash soil.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.4
• /
• pp.259-266
• /
• 2014

Understanding the forest fire patterns is necessary to comprehend the stability of the forest ecosystems. Thus, researchers have suggested the simulation models to mimic the forest fire spread dynamics, which enables us to predict the forest damage in the scenarios that are difficult to be experimentally tested in laboratory scale. However, many of the models have the limitation that many of them did not consider the complicated environmental factors, such as fuel types, wind, and moisture. In this study, we suggested a simple model with the factors, especially, the geomorphological structure of the forest and two types of fuel. The two fuels correspond to susceptible tree and resistant tree with different probabilities of transferring fire. The trees were randomly distributed in simulation space at densities ranging from 0.5 (low) to 1.0 (high). The susceptible tree had higher value of the probability than the resistant tree. Based on the number of burnt trees, we then carried out the sensitivity analysis to quantify how the forest fire patterns are affected by the structure and tree density. We believe that our model can be a useful tool to explore forest fire spreading patterns.

• Food Science of Animal Resources
• /
• v.37 no.5
• /
• pp.726-734
• /
• 2017

This study investigated the meat quality and storage characteristics of pork loin marinated in grape pomace powder during different storage periods. The experimental design included six treatments : pork loin containing only 100% water (Control, C); pork loin containing a combination of 20% grape pomace and 80% water (T1); pork loin containing a combination of 40% grape pomace and 60% water (T2); pork loin containing a combination of 0.5% grape pomace powder and 95.5% water (T3); pork loin containing a combination of 1.0% grape pomace powder and 99.0% water (T4); and pork loin containing a combination of 2.0% grape pomace powder and 98.0% water (T5). The pork loins aged by grape pomace and grape pomace powder showed decreased crude protein, crude fat, crude ash, pH, redness, and yellowness values; however, their moisture, lightness, and shear force increased significantly. During cold storage, marination with grape pomace and grape pomace powder reduced the 2-thiobarbituric acid value, volatile basic nitrogen value, and total microbial count in pork loin. Thus, marination with grape pomace and grape pomace powder improved the meat quality and storage characteristics, and could be used to improve storage stability of pork loin.

• Food Science of Animal Resources
• /
• v.30 no.1
• /
• pp.55-61
• /
• 2010

Breakfast sausages containing 1, 2, 3, and 4% sea tangle powder (Lamina japonica) were prepared. No differences were found in moisture, protein, and fat contents among the control and treatments. However, the ash content increased with increasing amounts of sea tangle powder (p<0.05). The pH levels in the treated samples were lower than the control in both the meat batters and the breakfast sausages (p<0.05). The $L^*$ and $a^*$ values of the meat batters and breakfast sausages were decreased by the addition of the sea tangle powder, and the control had the highest $b^*$ value (p<0.05). The added sea tangle powder improved cooking loss and improved emulsion stability. The T4 sample (containing 4% sea tangle powder) was shown to have the lowest cooking loss and water loss (p<0.05). The hardness, gumminess, and chewiness of the treatments increased compared to the control due to the presence of dietary fibers in the sea tangle. In the sensory evaluations, the 1% sea tangle powder treatment received a lower color score, but received significantly higher scores for flavor, tenderness, and juiciness (p<0.05). Collectively, the breakfast sausage containing 1% sea tangle powder was determined to have the highest overall acceptability. Altogether, the best results, in terms of physicochemical and sensory properties, were obtained for the breakfast sausage containing 1% sea tangle powder.

• Applied Biological Chemistry
• /
• v.48 no.2
• /
• pp.128-131
• /
• 2005

Sesame seed is known as a good nutritional source containing high oil (51%) and protein (20%). Sesame oil contains a very high oxidative stability compared to other vegetable oils. To obtain basic information for quality evaluation, imported and domestic sesame seeds were investigated to measure general components (ash, protein, moisture and oil), fatty acid composition and lignan content. Although the protein contents were the highest in domestic sesame seeds, yet the lipid contents were the highest in imported sesame seeds. Unsaturated fatty acids such as oleic acid and linoleic acids were the highest in the domestic sesame seeds. Lignan contents, the most important component known as antioxidant, were significantly higher in domestic sesame seeds than other imported sesame seeds. These results suggest that domestic sesame seed may have the best quality in terms of the functional components.

• Textile Coloration and Finishing
• /
• v.20 no.2
• /
• pp.1-8
• /
• 2008

Regenerated composite fibers are prepared from solution(styela clava tunics /poly vinyl alchol) using N-methylmorpholine-N-oxide(NMMO)/water(87/13)(wt/wt) as a solvent by dry-wet spinning. The chemical cellulose (94%, ${\alpha}$-cellulose content) used for this study is extracted from styela clava tunics (SCT, Midduck), which are treated in chemical process and mechanical grinding. The structure and physical properties of regenerated composite fibers were investigated through IR-spetra, DSC, TGA and SEM. The optimal blend ratio of SCT/PVA for spinning solution was 70/30 and the total weight was 4% concentrations in NMMO/water solvent system. The fiber density, moisture contents and the degree of swelling were $1.5(g/cm^3)$ 10.2(%) and 365(%), respectively. The crystallinity index of composite fibers are decreased as the PVA contents increased. Thermal decomposition of composite fibers took place in two stages at around $250^{\circ}C$ and $550^{\circ}C$. The best thermal stability was obtained with 30% PVA contents.

• Korean journal of food and cookery science
• /
• v.22 no.1 s.91
• /
• pp.12-21
• /
• 2006

This study analyzed the characteristics of single-harvested pepper flakes and investigated the effects of the addition of red and green pepper flakes on the quality of various dressings. Moisture contents of red and green pepper flakes were $14.57{\pm}0.13%\;and\;11.86{\pm}0.12%$, capsaicinoids contents on a dry-weight basis were $207.91{\pm}6.68\;mg/100\;g\;and\;172.32{\pm}5.94\;mg/100\;g$, and total free sugars were $21.63{\pm}1.81%\;and\;12.49{\pm}0.56%$, respectively. ASTA color of red pepper flakes was $150.93{\pm}4.56$. Viable cell numbers of red and green pepper flakes were $3.9X10^4\;CFU/g\;and\;5.2X10^5\;CFU/g$, respectively. The pH values in French dressing and Italian dressing, with added red and green pepper flakes, were slightly increased, but not in American Caesar dressing. Acidity and viscosity weren't statistically different in the 3 kinds of dressings by the addition of red and green pepper flakes. The color difference $({\Delta}E^*_{ab})$ for the storage periods was calculated in each dressing and that of American Caesar dressing with added red pepper flakes was extremely high. Viable cell number in each dressing was maintained at 2 log CFU/g during the storage periods. The sensory characteristics during the storage periods were assessed by members of a trained panel, and showed that the color and pungency of red and green flakes increased the overall preference in the Italian dressing and American Caesar dressing.

• Korean journal of food and cookery science
• /
• v.16 no.2
• /
• pp.188-194
• /
• 2000

Effects of native and RS-3 type resistant starches prepared from autoclaved-cooled amylomaize VII(AVII) and normal maize starches(NMS) on the rheological and baking properties of wheat flour dough and quality of breads were investigated. In farinogram, water absorption and dough development time were increased, but stability was reduced by the addition of RS. The addition of native starches or resistant starch made from AVII to wheat flour improved the total volume and specific loaf volume of bread compared with the control(no addition), but the addition of NMS-RS reduced those. During the storage of bread at room temperature, the moisture content of control was decreased but those of native starch- or RS-added breads remained constantly. AVII-RS- or NMS-RS-added bread was evaluated to have good overall acceptability compared with control by elementary school students. The addition of enzyme-resistant starch to bread regardless of botanical sources of starch not only improved the overall acceptability and nutritional benefits but also improved the sensory acceptability.

• Korean Journal of Food Science and Technology
• /
• v.36 no.4
• /
• pp.598-603
• /
• 2004

Physicochemical properties of crystalline-structured buckwheat starches cultivated and harvested in Taiwan, China, Korea, and USA were compared. X-ray diffraction pattern showed that all starches were type A as are most natural starches. Moisture contents of starches were 6.30-9.58%, and crude protein contents of Taiwanese and Chinese buckwheats were higher than those of Korean and American ones, whereas Korean and Chinese buckwheats had higher fat contents. Blue-value of Chinese buckwheat was highest at 0.39 and that of Korean buckwheat was lowest at 0.32. Amylose content of American buckwheat was highest at 27.6 and that of Korean buckwheat was lowest. Highest water-binding capacity was shown in Taiwanese buckwheat and lowest in American one. Higher amylase contents in Chinese and American buckwheats reduced expansion and solubility. Highest values of viscosity measured by RVA, breakdown indicating process stability, and setback closely connected to retrogradation of American buckwheat resulted in relatively hard gel.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1082-1082
• /
• 2001

Extrusion is one of the most important processes in polymer industry. The characterization of the polymer melt during processing will improve this process noticeably, One possibility of characterizing the actual processed polymer melt is the inline near infrared (NIR) spectroscopy, With this method several polymer properties can be observed during processing, e.g. composition, moisture ormechanical properties of the melt. For this purpose probes for transmission and reflection measurements have been developed, withstanding the high temperatures and pressures appearing during extrusion process (tested up to 300$^{\circ}C$ and 10 ㎫). For the transmission system an optical bypass was developed to eliminate disturbing spectral influences and hence increase the long term stability, which is the prerequisite for an industrial application. Measurements in transmission and reflection produced comparable results (or blending processes, where the prediction error was less than 1%. An optimum RMSEP of only 0.24% was found for preprocessed polymer blends measured in transmission on a laboratory extruder. A transflection measurement allowed for the first time the recording of relevant NIR-spectra in the screw area of an extruder. The application to a (PE+PP) blending process delivered promising results. This new measurement mode allows the observation of the ongoing processes within the screw area, which is of maximum Interest for reactive extrusion processes. Due to economic reasons the calibration transfer between different extrusion systems is also of high importance. Investigations on simulated and real-world spectra showed that a calibration transfer is possible. A new method alternatively to the well-known direct standardization procedures was developed, which is based on an automatic data pretreatment. This procedure delivers comparable results for the calibration transfer. Overall this paper presents concepts, components and algorithms for the inline near infrared (NIR) spectroscopy for polymer extrusion, which allows the use of it in a real industrial extrusion process.