• 한국식품과학회지
• /
• 제52권1호
• /
• pp.46-53
• /
• 2020

Carrots were deep fat fried with sunflower oil (SO), palm oil (PO), and a blend of palm and sunflower oils (PSO with PO:SO as 2:8 or 4:6) at different temperatures (180 and 190℃) and lengths of time (0.5 to 2.5 min). The quality of deep fat fried carrots was determined by the moisture and fat content, color, conjugated dienoic acid (CDA), hydroperoxide, p-anisidine value, and fatty acid composition. The moisture content of fried carrots decreased with increasing frying time, while the fat content increased. The CDA and p-anisidine values of carrots fried with SO were higher than those fried with PO because of greater unsaturated fatty acids content in SO. PSO was a better choice than SO or PO for deep fat frying carrots in the aspects of oxidative stability and ratio of unsaturated to saturated fatty acids. These results indicate that the quality of deep fat fried carrots depends on the type of oil and frying temperature used, as well as the length of time.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권4호
• /
• pp.588-597
• /
• 2007

Low-fat ground pork patties, LFGPP (<10% total fat) formulated with 0.1, 0.2 and 0.3 percent sodium alginate (SA) were processed and compositional, processing and sensory characteristics were compared with control patties containing 20% fat. The moisture content of raw and cooked LFGPP were significantly (p<0.05) higher than control patties because of greater amount of added water in the formulation. The cooking yield, moisture and fat retention also increased linearly in different treatments of LFGPP. The dimensional parameters such as gain in height, decrease in diameter and shrinkage were significantly (p<0.05) lower in LFGPP in comparison to control. Amongst the sensory attributes, flavour showed a declining trend with the increase in concentration of SA in LFGPP. However, low-fat patties with 0.1% SA rated similar to high-fat control. The lipid profile revealed 49.78 and 43.22% decrease in total lipids and cholesterol content respectively, compared to control. The calorie content was reduced significantly (p<0.05) in LFGPP. The texture profile of LFGPP with 0.1% SA was similar to that of high-fat control. The LFGPP remained stable without any appreciable loss of physico-chemical, microbiological and organoleptic quality during refrigerated storage ($4{{\pm}}1^{\circ}C$) for 21 and 35 days in aerobic and vacuum packaging respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권6호
• /
• pp.886-895
• /
• 2013

This study was conducted to explore the antioxidant potential and functional value of guava (Psidium guajava L.) powder in muscle foods. Guava powder was used as a source of antioxidant dietary fibre in sheep meat nuggets at two different levels i.e., 0.5% (Treatment I) and 1.0% (Treatment II) and its effect was evaluated against control. Guava powder is rich in dietary fibre (43.21%), phenolics (44.04 mg GAE/g) and possesses good radical scavenging activity as well as reducing power. Incorporation of guava powder resulted in significant decrease (p<0.05) in pH of emulsion and nuggets, emulsion stability, cooking yield and moisture content of nuggets while ash and moisture content of emulsion were increased. Total phenolics, total dietary fibre (TDF) and ash content significantly increased (p<0.05) in nuggets with added guava powder. Product redness value was significantly improved (p<0.05) due to guava powder. Textural properties did not differ significantly except, springiness and shear force values. Guava powder was found to retard lipid peroxidation of cooked sheep meat nuggets as measured by TBARS number during refrigerated storage. Guava powder did not affect sensory characteristics of the products and can be used as source of antioxidant dietary fibre in meat foods.

• Journal of the Korean Wood Science and Technology
• /
• 제19권4호
• /
• pp.18-26
• /
• 1991

This study was carried out to examine not only the effect and the process of activation of aluminum sulfate for the manufacture of PB and MDF, but also application of the activation treatment to PB and MOF made with MDI adhesive. The results were as follows: 1. For the manufacture of PB, activating effect did not take place Because the low moisture content of 30% in the process of activation treatment made probably insufficient activation. It needs to examine higher moisture content for the uniform and enough activation same as that of MOF. 2. In the case of MOF, Activating effect was excellent, it showed not only better results of MOR 48%, MOE 29%, IB 60% than those of the control but also better dimensional stability. 3. Application of alum activation to the PB and MDF made with MDI adhesive yielded no effects. Maybe it was the reson that the curing mechanism of MDI is different. 4. Modifing the wood surface was the oxidation and wettability was not the variable limiting glueline performance. It is necessary to make a more study about activating reaction.

• 한국식품조리과학회지
• /
• 제24권4호
• /
• pp.511-516
• /
• 2008

In this study, composite flour and dough were prepared with concentrated sweet pumpkin powder(CSPP) at varying concentrations of 3, 6, 9, 12, and 15%. The samples and a control were then compared with regards to quality characteristics, including moisture, protein, and ash contents, farinogram characteristics, amylogram characteristics, and falling number of flour and extensogram characteristics of dough, in an effort to determine the optimal ratio of CSPP in the formulation. As the CSPP content increased, the moisture and protein contents of the flour increased, whereas the ash contents decreased. With regard to the farinogram characteristics of flour, water absorption, development time, and stability decreased with increasing CSPP content, while weakness increased. The control group evidenced a significantly higher beginning temperature of gelatinization as compared to the CSPP samples. The temperature of maximum viscosity, maximum viscosity, and falling number of flour decreased with increasing CSPP content. With regard to the extensogram characteristics of dough, extensibility decreased with increasing testing time and CSPP content, whereas resistance, maximum resistance, and R/E ratio increased. In conclusion, these results show that $6{\sim}9%$ CSPP may prove very useful as a substitute for wheat flour in the production of hardroll bread, and may provide good nutritional and functional properties.

• 대한치과기공학회지
• /
• 제33권1호
• /
• pp.15-23
• /
• 2011

Purpose: Thy yttria tetragonal zirconia polycrystalline(Y-TZP) is a good structural ceramic for dental restoration. But it have a problem that delamination of veneering ceramic from the Y-TZP core materials. The problem generally occur at the interface, thus this study was conducted to evaluate the interface of Y-TZP using scanning electron microscopy(SEM). Methods: To investigate this aspect, high-resolution SEM observations were made of polished and etched (HF content gel) cross-sections of the interface area. Dry and moist veneering porcelain powders were built up on the zirconia base. Results: The extent of this surface faceting is dependent upon the moisture content of the porcelain powder and the firing temperature. More moisture and higher final heating temperature accelerates the observed faceting of the Y-TZP grains at the interface to the veneering ceramic. Conclusion: These changes of the Y-TZP grains indicate that destabilization of the tetragonal phase of zirconia occurs at the interface during veneering with ceramic. It may result in a reduction of the stability of the zirconia and interface.

• 한국전기전자재료학회논문지
• /
• 제20권6호
• /
• pp.555-560
• /
• 2007

This paper describes the results of a study on the sealing integrity of polymer housed surge arrester based on the thermal mechanical test. The polymer housed surge arrester employs silicone insulating materials for its housing, instead of the conventional porcelain housing. The polymer housed surge arresters exhibited the highest sealing integrity because it is not air volume between the FRP(fiber reinforced plastics) module and the silicone housing. In accordance, the sealing integrity of station class surge arresters is investigated with moisture ingress test. And, the influence of sealing integrity was evaluated through such as measurement of the deflection, reference voltage, leakage current. In electrical characteristics, reference voltage decreased in the range of $16.45{\sim}16.15\;kV$ with after thermal mechanical test. In contrary, despite the continued moisture ingress, the polymer housed surge arresters exhibited almost the same leakage current value and the resistive leakage current has risen slightly. As a results, It was thought that the polymer housed surge arresters shows good stability with sealing integrity.

• 한국의류산업학회지
• /
• 제24권6호
• /
• pp.775-781
• /
• 2022

As part of research to develop a permanent wave-reducing agent for hair, in the current study, 0.1%-1.0% of Polyquaternium-10 was added to a permanent reagent containing Nicotinoyl Dipeptide-23 to prepare the agent, which was tested on damaged hair. The pH change was relatively stable even after a date, but due to the hair's natural composition, 0.1%-0.6% of the Polyquaternium-10 concentration according to pH was suitable. The temperature safety experiment demonstrated it to be stable at a high temperature and at room temperature, but when a Polyquaternium-10 concentration of 0.9% or higher was added at 0℃, coagulation occurred. In terms of the force efficiency of permanent wave formation, wave efficiency lowered as the concentration increased: the longer the wave lasts, the lower the Polyquaternium-10 concentration. The permanent moisture content was found to be higher as the concentration of Polyquaternium-10 increased. Therefore, when Polyquaternium-10 is applied to the permanent wave-reducing agent, considering stability, permanent formation, durability, and moisture rate, the most suitable concentration was found to be that of Polyquaternium-10 in the cysteine-reducing agent. A novel finding from this study is that as the concentration of Polyquaternium-10 increases, the consistency of the permanent wave-reducing agent changes, shifting from a liquid to a viscous liquid formulation.

• 임산에너지
• /
• 제21권2호
• /
• pp.34-42
• /
• 2002

천연물계의 유지를 목재에 처리하여 발수성능을 평가하였다. 시험에 사용한 유지는 아마인유, 피마자유, 올리브유, 콩기름, 들기름, 해바라기 씨 기름이다. 발수성 평가는 흡습성, 흡수성 시험과 접촉각 시험으로 하였다. 발수 처리한 목재를 빛과 수분에 의해 촉진열화 시킨 후에 열화정도를 색차계로 측정하였다. 촉진열화된 처리목재의 발수성능을 흡수성시험과 접촉각 시험을 통하여 비교 측정 하였다. 흡습성 시험결과, 흡습 초기에는 무처리에비하여 흡습량이 적으나 흡습처리 시간이 증가할수록 무처리의 흡습량에 가까워져 48시간 흡습처리 후에는 흡습비의 큰 차이는 없었다. 접촉각 시험의 결과, 처리재와 무처리재간의 결과가 큰 차이를 나타내었다. 유지의 농도와 종류에 따른 접촉각 변화는 흡습성 시험과 같이 큰 차이는 나타나지 않았다. 천연유지의 발수성능으로는 기상열화에 대한 안정성이 낮았다. 천연오일 단독처리만으로는 광열화에 대한 안정성을 기대하기 어려웠다.

• 농업과학연구
• /
• 제43권5호
• /
• pp.715-722
• /
• 2016

Rapid determination of food quality is important in food distribution. In this study, the chemical properties of oats were analyzed using visible-near infrared (VIS-NIR) spectroscopy. The objective of this study was to develop and validate a predictive model of oat quality by VIS-NIR spectroscopy. A total of 200 oat samples were collected from domestic and import markets. Reflectance spectra, moisture, protein, fat, Fe, and K of oat samples were measured. Reflectance spectra were measured in the wavelength range of 400 - 2,500 nm at 2 nm intervals. The reflectance spectrum of an oat sample was measured after sample cell and reflectance plate spectrum measurement. Preprocessing methods such as normalization and $1^{st}$ and $2^{nd}$ derivations were used to minimize the spectroscopic noise. The partial-least-square (PLS) models were developed to predict chemical properties of oats using a commercial software package, Unscrambler. The PLS models showed the possibility to predict moisture, protein, and fat content of oat samples. The coefficient of determination ($R^2$) of moisture, protein, and fat was greater than 0.89. However, it was hard to predict Fe and K concentrations due to their low concentrations in the oat samples. The coefficient of determinations of Fe and K were 0.57 and 0.77, respectively. In future studies, the stability and practicability of these models should be improved by using a high accuracy spectrophotometer and by performing calibrations with a wider range of oat chemicals.