• Computers and Concrete
• /
• v.8 no.4
• /
• pp.389-399
• /
• 2011

The increasing concern for reinforced concrete structure durability has been justifying in many ways in the last few decades. However, there is no perfect durability test method till now. In this research an alternative method, which is based on the cumulative moisture loss percent of the concrete specimens after oven-drying, was proposed to estimate the durability performance of the concrete. Two temperatures were considered for the oven-drying tests: $100^{\circ}C$ and $200^{\circ}C$. Test results showed that oven-drying at $200^{\circ}C$ was obviously an unsuitable procedure to preserve the fragile microstructure of cement-based materials. By contrast, experimental results through oven-drying at $100^{\circ}C$ allowed estimating the moisture loss percent of cement-based materials in a more rational manner. Moreover, the magnitudes of the cumulative moisture loss percent obtained from oven-drying tests at $100^{\circ}C$ for 48 hours have good correlations with the data of other well-known methods, namely, electrical resistance test, water permeability test, and mercury intrusion porosimetry test. This investigation established that regarding the oven-drying test as one of the tests for evaluating the potential durability of concrete is considerably practicable.

• International Journal of Highway Engineering
• /
• v.10 no.1
• /
• pp.75-85
• /
• 2008

Moisture damage of asphalt mixtures can occur because of a loss of bond between the asphalt binder and the fine and coarse aggregates. Therefore, moisture damage on asphalt pavements is the main cause of potholes, which is one of the main distress type of asphalt pavement. The purpose of this study is to evaluation effect moisture damage on material properties of asphalt mixtures through the laboratory performance test. The existing Modified Lottman test procedure was improved and the number of times that thermal cyclic conditioning can be added until the asphalt mixtures is damaged, was tested in order to exhibit the changes of the material properties because of moisture damage by immersion. Through the above experiments, it was found that the material properties of asphalt mixtures on room-temperature were rapidly decreased with loss of about 50% at initial stage of moisture damage caused by the amount of repeated immersion. Also, it was found that the property damage ratio using material properties of failure energy and $DCSE_f$ by test temperature $25^{\circ}C$ were showed a high relationship to moisture damage of the asphalt mixtures caused by the amount of repeated immersion.

• Journal of Biosystems Engineering
• /
• v.16 no.1
• /
• pp.49-59
• /
• 1991

A numerical model was developed to predict grain temperature, moisture content, and drymatter loss of rough rice in a grain storage bin. This model simulated conduction, natural convection, and mass transfer occuring inside a storage bin. The results obtained from the study were as follows. 1. The predicticted results agreed well with the measured results. 2. Rough rice could be store safely for one year in Suweon, Dajeon, and Jingu area. 3. Aeration of 5-day was required to control grain temperature and moisture content rise early in Jun and July, respectively.

• Journal of the Korean Society of Combustion
• /
• v.14 no.3
• /
• pp.16-23
• /
• 2009

It is strongly desired for coal-fired power plants to utilize not only low-rank coals with high moisture contents, but also lowering cost with diversifying fuel sources. In this study, combustion characteristics of low rank coal with high moisture, and standard pulverized coals are experimentally investigated using TGA (Thermogravimetric Analysis) and DTF (drop tube furnace). The coals tested are three kinds of coal with moisture content ranging from 8.32 to 26.82%. The results show that under the air combustion condition, the burn-out time at TGA rises as moisture content increases, and standard pulverized coal with 8.32% moisture content showed the lowest activation energy of 55.73 kJ/mol. In case of the high amount of moisture, the combustion efficiency decreases due to evaporation heat loss, and unburned carbon in ash produced at combustion process in DTF increased. Aslo, initial deformation temperature of slag attached in alumina tube of DTF decreased with lowering the crytallinity of anorthite and augite. To improve the combustion reactivity and efficiency, it is effective to upgrade through drying the high moisture coal to moisture level (less than 10%) of standard pulverized coal.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.932-938
• /
• 1997

Changes in viscosity and dynamic theological properties of Job's-tears were measured by Bohlin dynamic tester as a function of moisture, and measurement was performed within a linear viscoelastic range. The result of the shear stress vs shear rate of Job's-tears at different moisture contents $(50{\sim}75%)$ was applied to mathematical models and Herschel-Bulkley model showed the highest correlation coefficient. Lower moisture content (55%) produced higher yield stress and consistency index, but lower flow behavior index, whereas higher moisture content showed reverse effects. Job's-tears with $50{\sim}70%$ moisture contents showed a higher storage modulus (G') than loss modulus (G') at all frequencies, showing a higher concentrated polymer characteristics. However, higher moisture content (>75%) showed crossover point between G' and G', and frequency dependency. As the moisture content was increased, the amount of viscoelastic properties such as G', G', complex viscosity decreased during heating, and initial temperature and miximum value of viscoelastic properties shifted to higher temperatures, representing the moisture-dependence of Job's-tears upon theological properties.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.4
• /
• pp.369-376
• /
• 2002

The dielectric properties of cereal grains such as short-grain rough rice, brown rice and barley with various moisture contents were determined by measuring the attenuation and phase shift of the microwave signal trough the grain samples at 9.5GHz. The microwave free-space transmission measurement system consisted of sample holder, horn antenna and network analyzer. Dielectric constant and loss factor of grain samples increased with moisture content and bulk density and agreed well with previous research results. Moisture density, which is defined as the product of moisture content and bulk density, was proposed as a bulk density and variety compensation factor. The technique for measurement of dielectric properties based on free-space transmission may be useful for other particulate materials.

• Journal of Biosystems Engineering
• /
• v.6 no.1
• /
• pp.83-92
• /
• 1981

A simulation model of natural air drying to predict the changes of the grain moisture content and dry matter loss of rough rice was developed by the application of mass diffusion theory. A series of simulated drying tests was conducted using the 10 year weather data (1970-1979) obtained from Cheongju, Chuncheon, Daegu, Daejeon, Jeonju, Jinju and Suweon in Korea. System performance factors treated in this study were initial moisture content, airflow rate, bin diameter and grain depth. The results obtained in this study are summarized as follows: 1) The simulation model used in this study was validated with actual experimental results and was applicable to the natural air drying of rough rice. 2) Minimum airflow rates for safe drying were determined for different initial moisture contents and regional weather conditions as shown in Table 6. 3) Equations for estimating drying time and dry matter loss in terms of airflow rate and initial moisture content were derived in the form of an exponential function. 4) These results show that the natural air drying system of rough rice is feasible in Korea even for the poorest drying condition.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.1091-1099
• /
• 2024

Fluoride-salt-cooled High-temperature Reactor (FHR) is a promising nuclear reactor technology. Among many challenges presented by the molten fluoride salts is the corrosion of salt-facing structural components. Higher moisture contents, in the FLiNaK (LiF-NaF-KF, 46.5-11.5-42 mol%) salt, aggravate intergranular corrosion and pitting for the given alloys. Therefore, several thermal dehydration tests of FLiNaK salt were performed with a batch size suitable for thermal-hydraulic experiments. Thermogravimetric Analysis (TGA) was performed for the three constituent fluoride salts individually. Preliminary thermal dehydration plans were then proposed for NaF and KF salts based on the TGA curves. However, the dehydration process may not be required for LiF since its low mass loss (<1.3 wt%). To evaluate the performance of these thermal dehydration plans, a batch-scale salt dehydration test facility was designed and constructed. The preliminary thermal dehydration plans were tested by varying the heating rates, target temperature, and holding time. The sample mass loss data showed that the high temperatures (>500 ℃) were necessary to remove a significant amount of moisture (>1 wt%) from NaF salt, while relatively low temperatures (around 300 ℃) with a long holding time (>10 h) were sufficient to remove most of the moisture from KF salt.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.27 no.1
• /
• pp.25-33
• /
• 2021

This experiment was conducted to determine the effects of the pre- and post-harvest variable factors on the processed product of kimchi cabbage cultivated in semi-highland at summer time. Kimchi cabbage cultivar 'Chun Gwang' was grown in an open field and/or under a plastic greenhouse condition; it was stored at 0? after harvesting with low-density polyethylene (LDPE) film packaging. The pre-harvest characteristics growth parameters, fresh weight, head weight, no of leaves, leaf thickness, firmness, moisture content etc. were evaluated. The evaluated postharvest characteristics were fresh weight loss, appearance, trimming loss, SPAD value, moisture content and hue angle. The results show that the fresh weight and leaf thickness were higher in 'Chun Gwang' kimchi cabbages grown in the greenhouse than those in the field. However, the other evaluated factors were not affected by the type of cultural method. During the storage, the cabbage continued to decrease in fresh weight loss, trimming loss and moisture content. When compared to the kimchi cabbage showed significant difference in the fresh weight loss, trimming loss and moisture content during storage. It was confirmed that both cultural methods indoor- and outdoor did not show head growth parameters of 'Chun Gwang' kimchi cabbages on semi-high land at summer time. Although no difference in the growth before storage was observed, the evaluated characteristics like fresh weight loss etc. were influenced by cultural method as a pre-harvest factor. This study suggests that there were to be affected by pre-harvest factor during storage after harvest. In this study, an integrated management system combining relationship between processed agricultural products and their pre- and post-harvest factors.

• Textile Coloration and Finishing
• /
• v.10 no.5
• /
• pp.39-47
• /
• 1998

The purpose of this study was to investigate the effect of alkali treatment on EG solution of polyester/silk union cloth(P/S cloth) . Tensile strength, moisture regain, crease resistance, and reduction ratio of the treated P/S cloth were measured. The results of this study were as follows ： 1) The weight loss of P/S cloth treated with EG solution was three times higher than those of P/S cloth treated with $H_2O$. The weight loss of P/S cloth was increased greatly with increasing concentration of NaOH, temperature, and time. Favorable weight reduction of treating condition could be obtained when lower concentration of NaOH was used with longer time. 2) If it was added $H_2O$ on EG solution, weight loss of polyester increased, while those of silk decreased. In addition, decreasing ratio of tensile strength warp direction (polyester) was lower, while those of weft direction(silk) was higher. 3) Moisture regain of P/S cloth treated with EG solution increased with weight loss up to 10% . Crease resistance of P/S cloth was the highest at weight loss of 10~15%.