• Title/Summary/Keyword: moisture content change

검색결과 616건 처리시간 0.029초

불포화토에서의 복합적 습기와 열흐름의 분석모델 (A Coupled Moisture and Bent Flow Analysis Model in Unsaturated Soil)

  • Kim, Suk-Nam;Kim, Suk-Nam
    • 한국지반공학회논문집
    • /
    • 제18권5호
    • /
    • pp.67-72
    • /
    • 2002
  • 포장내의 흙들의 함수비는 강우, 온도 등의 기후적 요인에 따라 계절적으로 변화한다. 그것은 강우로인한 동수경사가 습기의 흐름을 유발하고, 온도변화로 인한 온도경사가 직.간접적으로 열흐름뿐만아니라 습기의 흐름을 유발하기 때문이다. 포장내의 흙들은 보통 불포화상태로 존재한다. 그리고 열의 흐름과 습기의 흐름은 상호간에 복잡한 작용을 하는 복합적인 과정들로 인식되어 왔다. 이 논문은 불포화토내의 복합적인 열의 흐름과 습기의 흐름에 대해 유한요소법을 이용한 하나의 일차원적 분석모델을 제시한다. 이 모델은 온도와 함수비 변화뿐만아니라 시간에 따른 동상을 예측하기 위하여 사용될 수 있다. 온도 및 함수비의 변화 그리고 동상의 예측은 포장의 설계 및 유지관리를 위해 의미 있는 일이 될 것이다. 이 모델은 다른 모델의 결과들과 비교를 통해서 검증된다.

함수상태에 따른 콘크리트의 역학적성상 (Mechanecal Prolperties of Concerte as the Condition of Contained Water)

  • 김인수;오창희
    • 콘크리트학회지
    • /
    • 제4권1호
    • /
    • pp.127-134
    • /
    • 1992
  • 일반적으로 콘크리트 내부의 수분은 주로 중심부에 분포되어 있으며, 노출된 콘크리트의 표면은 주위의 온습도영향에 따라 건조하게 된다. 이에 따라 동일 부재내에서도 부위에 따라 함수율이 달라지게 된다. 이는 콘크리트의 내부공극에 존재하고 있는 수분의 증발과 이동으로 인하여 함수상태가 달라지기 때문이다. 이와 같이 콘크리트의 함수상태변화로 인하여 압축강도, 탄성계수, 용적변화등의 제성상이 각 부위에 따라 달라질 것으로 예상된다. 따라서, 콘크리트의 함수상태에 따른 콘크리트의 제성상을 명확히 파악함은 매우 중요하다고 판단된다. 본 연구에서는 콘크리트의 함수상태와 역학적 성상을 규명하는데 그 목적이 있다. 콘크리트의 함수량이 증가할수록 압축강도와 인장강도는 감소하나, 탄성계수는 증가한다. 본 연구에서 실험을 통하여 이와 같은 콘크리트의 성상과 함수상태와의 상관관계를 밝혔다.

지표면 열수지의 강수응답성에 관한 연구 (The Response of soil surface heat budget to the precipitation)

  • 황수진;진병화
    • 한국환경과학회지
    • /
    • 제3권2호
    • /
    • pp.89-100
    • /
    • 1994
  • It is very important to assess accurately the terms which are included in the heat budget equation of soil surface because they are used in the UM and miso-scale circulation modeling as well as in the micrometeorological studies. Each terms in the heat budget equation change according to the soil moisture content. So, it is necessary to specify clearly the relations between soil moisture content and these terms. Special experiment with micrometeorological measurements was executed to study these relations at Environmental Research Center of Tsukuba University, Japan. The results are as follow: 1. The soil moisture contents of 1 cm and 4 cm depth are oscillated with one day Period in drying process and the amplitude of variation of 1 cm depth is greater than that of 4 cm. 2. Increase in soil moisture contents due to precipitation result in decrease of albedo with step function. 3. Sensible heat is in reverse proportion to the soil moisture content and latent heat is in direct proportion to it. Latent heat is more sensitive than sensible heat according to the soil moisture variation. Net long wave radiation have high correlation with soil moisture. 4. Comparing with the radiative term with the flux term in wetting process due to precipitation, the energy transfer of the aero and thermodynamic flux is greater than that of the radiative heat flux.

  • PDF

20대 여성의 스킨토너 도포 횟수에 따른 안면 피부의 수분함량 변화에 대한 연구 (A Study on the Moisture Change of Facial Skin According to the Number of Skin Applications in Women in their 20's)

  • 김선민;박유진;심보람
    • 융합정보논문지
    • /
    • 제11권2호
    • /
    • pp.188-193
    • /
    • 2021
  • 본 연구는 만 25세 이하의 여대생을 대상으로 스킨 도포 횟수에 따른 안면 피부의 수분함량 변화에 대한 연구를 하였다. 수분함량(moisture contents)은 피부 수분 측정기(피부 유수분측정기, PRC, 중국)를 이용하여 측정하였다. 스킨은 I사의 블루베리 리밸런싱 스킨[대용량] 500ml를 임상실험재료로 사용하였다. 이마와 눈가, 볼, 턱 모두 도포 전 보다는 한 겹 도포 후가 수분함량이 더 높았으며, 한 겹 도포 후 보다는 열 겹 도포 후 수분함량이 더 높은 것을 알 수 있다. 이와 같은 결과로 세안 후 기초 제품을 도포할 때 가장 첫 번째 단계인 스킨의 횟수를 늘려 도포 한 후 로션과 수분크림 등 기초 제품을 바른다면 수분함량을 더욱 높일 수 있는 방법이다.

혼사전력 변화에 의한 합성사의 혼련특성에 관한 연구 (The study on the mixing character of synthetic molding sand by power change)

  • 김영식;정종연;이종남
    • 한국주조공학회지
    • /
    • 제4권1호
    • /
    • pp.12-20
    • /
    • 1984
  • In order to investigate the effect of size of sand grains, bentonite content and moisture on mixing power, standard mixing power, permeability, green compressive strength and green mold hardness were measured with mixing time, and also coated layer of mixed sand with time was observed by optical microscope and scanning electron microscope. From this experiment, the results were summarized as follows. 1. Mixing power increased as size of sand grains decreased. 2. Mixing power increased gradually as bentonite content increased and in particular, increased rapidly in 7-10% bentonite. 3. Mixing power increased as moisture content decreased. 4. The mixing time required to get the optimum mixing power decreased as moisture content and grain size increased, but increased as bentonite content increased.

  • PDF

수도의 수확적기결정을 위한 기초적 연구 (A Study on the Changes in Grain Weight, Moisture Content, Shattering Force, Milling Ratio and Apparant Physical Quality of Rice with Harvesting Time)

  • 권용웅;신진철
    • 한국작물학회지
    • /
    • 제25권4호
    • /
    • pp.1-9
    • /
    • 1980
  • To determine the optimum harvest time of recent rice varieties from Indica/Japonica remote crosses, leading varieties Suweon 264 and Milyang 23 were tested for the changes in dry matter weight and moisture content of grain, shattering, shelling ratio, milling ratio, and apparant physical quality during grain development at 5 day-intervals from 20 days to 55 days after heading. The results are summarized as follows: 1. Grain weight (dry matter) reached its maximum (physiological maturity) at 30 days after flowering (DAF) in Suweon 264, and at 35 days in Milyang 23, and thereafter it did not change significantly until 55 DAF. 2. Time course of decrease in grain moisture content (Y, %) during maturation (X, DAF) consisted of two linear phases, i.e. a fast and a slow period: Y=68.245-1.33X until 34DAF, and Y=23.025-0.470X until 55DAF after 34DAF in Suweon 264; Y=73.62-1.634X until 24.5DAF, and Y=33.59-0.570X until 55DAF after 24.5DAF in Milyang 23. Two varieties showed the same grain moisture content of 28% (wet basis) at physiological maturity in spite of the distinct differences in the heading date, time of physiological maturity and thereby ripening climate. 3. Force to shatter a grain ranged about 90 to 100g in Milyang 23, and about 200 to 250g in Suweon 264 and in a Japonica variety, Jinheung. The force, however, did not change significantly with harvest time from 35DAF to 50DAF. 4. The changes in the ratios of shelling, milling, broken rice and tinted rice with harvest time were insignificant during a period from 35DAF to 55DAF. However, ratios of green rice and white belly rice decreased significantly with delay in harvest time during 10 days after physiological maturity. 5. The best time of harvest for maximum yield and good quality is thought to be 10 days after physiological maturity, and grain moisture content at this time was about 20% on wet basis.

  • PDF

확산초음파의 콘크리트 함수율에 대한 의존성 (Effects of Moisture Content in Concrete on Diffuse Ultrasound)

  • 안은종;신명수
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제24권1호
    • /
    • pp.142-147
    • /
    • 2020
  • 본 연구의 목적은 콘크리트 재료 및 구조물의 균열 특성 평가에 활용되고 있는 확산초음파 기법의 적용 가능성을 검토하는데 있다. 이를 위한 첫 단계로 외부 환경에 따라 변화하는 콘크리트의 수분 함유량 변화를 묘사하여, 확산초음파 파라미터와 콘크리트 수분 함유량 사이의 상관관계 분석을 수행하였다. 실험실 환경에서 완전 건조된 실험체를 수중에서 포화시켜가며 콘크리트 함수율의 차이를 묘사하였으며, 콘크리트 내부에서 초음파의 산란 현상이 충분히 발생하는 500 kHz 주파수 대역대의 신호를 가진 및 분석하여 확산초음파 파라미터인 초음파 확산계수와 초음파 에너지 소산계수를 산정하였다. 콘크리트의 수분 함유량은 확산초음파 실험 시 실험체의 무게 변화를 통해 추정하였으며, 수분 함유량 증가에 따라 실험체에서 무게가 약 2.5 % 가량 증가한 것으로 나타났다. 콘크리트 실험체의 포화정도에 따라 초음파 확산계수는 지속적으로 증가하는 것으로 나타났으나, 변화율은 확산초음파 기법의 계측 오차 범위 내에 있었다. 반면에, 초음파 에너지 소산계수는 완전 포화된 콘크리트에서 완전 건조된 콘크리트 대비 약 120 % 증가하여, 수분함유량에 대해 민감한 것으로 나타났다. 따라서, 추후 확산초음파 기법을 활용하여 콘크리트 재료 및 구조물의 균열 특성 평가 시 함수율에 대한 고려가 필요할 것으로 사료된다.

로터리 교반식 퇴비화 시설의 운전 조건 개선 (Improvement in the Operating Conditions of the Rotary Mixing Compost Plants)

  • 김은경;이택순;서정윤
    • 한국환경농학회지
    • /
    • 제15권3호
    • /
    • pp.355-361
    • /
    • 1996
  • The Purpose of this study was to investigate the effect of the Change in the operating conditions on rotary turning compost plants. The major parameters investigated were moisture content and mixing of the sawdust and pig farm wastewater. Pig farm scale composting plants with mixing rotary were used in this study. Wastes used for the study were sawdust, pig manure, urine and wastewater. When the moisture content was 75%, the compost product obtained from the plants had better physical characteristics than that obtained from the plants with moisture contents of 70%, 80% and 85%.(two a day mixing). When the turning was twice a day, the compost product obtained from the plants had better characteristics than that obtained from non-mixing.(moisture content 75%). C/N ratio, pH value and coliform bacterial population were stable in the compost.

  • PDF

The Characteristics of Ultrasonic Wave Transmitted Through Drying Wood

  • Kang, Ho-Yang
    • Journal of the Korean Wood Science and Technology
    • /
    • 제39권2호
    • /
    • pp.117-124
    • /
    • 2011
  • The possibility of using the properties of an ultrasonic wave as a means for monitoring the moisture content of a board during drying was investigated. The ultrasonic wave signals are influenced by moisture content and other factors such as temperature, moisture gradient and coupling area. The effect of temperature was examined by measuring the transit times, amplitudes and velocities of ultrasonic waves transmitted through air, a metal bar and a board at various temperatures. The effect of a moisture gradient was studied using a model specimen composing five wood pieces of various moisture contents. The velocity and amplitude of the ultrasonic waves transmitted through air increase with temperature, while those through a metal bar and a board decrease. It was confirmed that the temperature effect is partially attributed to the change of transducer's properties. The effect of a moisture gradient on the velocity of an ultrasonic wave varies with the average moisture content of a board. As the dimension of the end face of a board increases the velocity of an ultrasonic wave increases and low frequency components more dominates than high frequency components. The transit times of ultrasonic waves transmitted through a board during kiln drying reflect the temperature steps in the drying schedule and the transducer temperatures.

Change in Ginsenosides and Maltol in Dried Raw Ginseng during Extrusion Process

  • Ha, Dae-Chul;Lee, Jong-Won;Ryu, Gi-Hyung
    • Food Science and Biotechnology
    • /
    • 제14권3호
    • /
    • pp.363-367
    • /
    • 2005
  • Although widely applied in the food industry, extrusion cooking has not been applied to the traditional red ginseng process for steaming and drying ginseng. We therefore investigated the change in the effective components in red ginseng (total saponins, ginsenosides and maltol) from extruded raw ginseng. The variables were the drying temperature of the sliced raw ginseng (80 and $90^{\circ}C$) before the extrusion process and the moisture content (15 and 22%, w.b.) during the extrusion process. Ginsenosides Rg1 and Rg2 were detected in dried ginseng at $80^{\circ}C$, but ginsenoside Rg3, which was contained in red ginseng, was not detected. On the other hand, ginsenosides Rg1, Rg2 and Rg3 were detected in extruded ginseng at moisture contents of 15 and 22%. Total ginsenosides were highest at $90^{\circ}C$ drying temperature and 22% moisture content for the extrusion process.