• Korean Journal of Food Science and Technology
• /
• v.36 no.6
• /
• pp.995-1000
• /
• 2004

Nutritional composition and antioxidative capacity of mulberry fruit (Ficus-4x) were investigated for evaluation as new red-colored fruit. Contents of moisture, crude fat, crude protein, and vitamin C were similar, whereas that of crude ash was higher, to those of other berry fruits. Contents of minerals (Ca, 14.33 mg/100 g; P, 39.98 mg/100 g; Fe, 6.01 mg/100 g; Zn, 4.04 mg/100 g; Mn, 2.26 mg/100 g), particularly Fe, were higher than those of other berry fruits. Hardness, springness, cohesiveness, gumminess, and chewiness of mulberry fruit were higher, and color values (L, 36.03; a, 1.80; b, 1.54) were lower than those of strawberry. Relative scavenging activities of mulberry fruit methanol extract and its cyanidine 3-glucoside on 1, 1-diphenyl-2-picrylhydrazy radical (DPPH) were 35.7 and 78.2%, respectively, using butylated hydroxyanisole (BHA) as standard. Antioxidant activities in corn oil (peroxide values and conjugated dienoic acid) were tertiary butylhydroquinone (TBHQ) > mulberry fruit ethanol extract > mulberry fruit water extract > butylated hydroxytoluene (BHT) > tocopherol. Results show mulberry fruit can be very useful red-colored fruit for development of functional foods with beneficial effects on radical scavenging and antioxidative capacities.

• Korean Journal of Food Science and Technology
• /
• v.39 no.6
• /
• pp.608-613
• /
• 2007

This study was conducted to evaluate the meat quality of pork produced by feeding fermented rice bran (FRB) (10 to 20%). In the proximate composition analysis there were no significant differences, but the FRB treated groups showed a tendency for higher moisture content and a lower fat content. There were no significant changes found in the physicochemical property analysis, except for cooking loss and water holding capacity, which are the most important factors for estimating meat quality. The cooking loss of the FRB pork was significantly lower than that of the control group (p<0.01). The water holding capacity of the 20% FRB roup was higher than that of the control group (p<0.01). The shear force value of the 20% FRB group was also higher than that of the control group, but the 10% FRB group showed no difference from the control group. The total free amino acid volume of the meat increased, depending on the volume of FRB added. The contents of glutamic acid, glycine, and alanine, which are important factors for taste and flavor, were higher in the FRB groups an the control group. In the sensory analysis, the FRB groups showed high scores for color, aroma, flavor, juiciness, taste, and overall acceptability. Taken together, adding FRB to the feed improved the quality of pork.

• Food Science of Animal Resources
• /
• v.36 no.1
• /
• pp.29-36
• /
• 2016

This study was performed to investigate the role of pH and temperature postmortem, and to demonstrate the importance of these factors in determining meat quality. Postmortem pH_45min (pH at 45 min postmortem or initial pH) via analysis of Pearson’s correlation showed high positive correlation with pH change pH_c24 (pH change from pH_45min to pH_24h postmortem). However, postmortem pH after 24 h (pH_24h or ultimate pH) had a high negative correlation with pH change, pH_c24, CIE L*, and protein content. Initial temperature postmortem (T_1h ) was positively associated with a change in temperature from 45 min to 24 h postmortem (T_c24) and cooking loss, but negatively correlated with water holding capacity. Temperature at 24 h postmortem (T_24h) was negatively associated with T_c24. Collectively, these results indicate that higher initial pH was associated with higher pH_c24, T_1h, and T_c24. However, higher initial pH was associated with a reduction in carcass weight, backfat thickness, CIE a* and b*, water holding capacity, collagen and fat content, drip loss, and cooking loss as well as decreased shear force. In contrast, CIE a* and b*, drip loss, cooking loss, and shear force in higher ultimate pH was showed by a similar pattern to higher initial pH, whereas pH_c24, carcass weight, backfat thickness, water holding capacity, fat content, moisture content, protein content, T_1h, T_24h, and T_c24 were exhibited by completely differential patterns (p<0.05). Therefore, we suggest that initial pH, ultimate pH, and temperatures postmortem are important factors in determining the meat quality of pork.

• The Korean Journal of Pesticide Science
• /
• v.7 no.3
• /
• pp.182-187
• /
• 2003

In order to elucidate a degradation characteristics of herbicide mefenacet in soil, the persistence in soils was studied under laboratory conditions for $90\sim120$ days at $28^{\circ}C$. Mefenacet residues were determined from the two soils which pre-treated by sterilization and flooding, respectively. Non-sterilized upland soil was used as a control. When 70 days elapsed from application time, $55\sim63%$ of mefenacet applied were dissipated in control soils. However, $32\sim33%$ of mefenacet applied were dissipated in the sterilized soils and $33\sim35%$ was dissipated in the flooded soils. 까 lese results indicated that the degradation of mefenacet was assumed to be due to microorganism, especially aerobic microbes. In order to elucidate the influence of water content on the persistence of mefenacet in soil, water content in soils was adjusted to 20, 50, and 80% of the water-holding capacity(Field capacity, WHC). The half-life of mefenacet in soil containing 20% and 50% of WHC were 82 and 73 days, respectively, after incubation for 90 days. However, the half-life in soil containing 80% of WHC was shortened to 61 days. These results indicated that degradation of mefenacet in soil was influenced by the activity of soil microorganism, organic matter content and water content.

• Polymer(Korea)
• /
• v.29 no.1
• /
• pp.74-80
• /
• 2005

To use the filter materials for reduction of carbonyl compounds in cigarette mainstream smoke, the bead type cation and anion exchangers were synthesized by the suspension polymerization of GMA and DVB followed by the subsequent functionalization with sodium sulfite and diethylamine, respectively. FT-IR/ATR was used to characterize functionalized copolymer formation by sulfonation and amination, and the morphology change of ion exchangers according to the adsorption of cigarette mainstream smoke were observed by SEM. Ion exchange capacity, functionalization yield and adsorption properties of carbonyl compounds in cigarette mainstream smoke were investigated. The highest functionalization yields and ion exchange capacity were obtained at 5 wt% DVB content in co-monomer. The adsorption amount of carbonyl compounds in cigarette mainstream smoke of anion exchanger was higher than that of cation exchanger because of its electron delocalization in carbonyl group. The adsorption efficiency was increased in the presence of moisture. This results indicated that the anion exchanger was applicable for cigarette filter material because of its large ion exchange capacity and rapid ion exchange reaction.

• Food Science of Animal Resources
• /
• v.29 no.3
• /
• pp.356-363
• /
• 2009

This study was carried out to investigate the effect of hot boning and curing condition on the quality characteristics of ground chicken breast. Treatments were cured by four conditions follows; control (general curing method), T1 (after hot-boning and then immediately cured), T2 (after hot-boning and immediately cured, then frozen), and T3 (after hot-boning, immediately frozen, refrigerated and then cured). The pH of chicken breast in the state of pre-rigor was 6.22. The pH of cold storage or freezing chicken breast meat respectively were 5.70 or 5.61. The pH of T1 and T2 treatments were significantly higher than those of control and T3 treatment (p<0.05). After stored for 1 wk, the pH value of T1 treatment had a higher value than those of other treatments. T1 treatment had the highest water holding capacity and the lowest cooking loss among all treatments, regardless of the cooking methods. The reduction in diameter for T1 and T2 treatments was lower than those of control and T3 treatment (p<0.05). T1 treatment had the lowest fat loss and moisture loss among all treatments, and the emulsifying capacity of T1 treatment was the highest. The protein solubility of T1 treatment was significantly lower than that of T3 treatment.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.5
• /
• pp.1119-1126
• /
• 2017

Quality characteristics of commercially available soybean and mung-bean flours in Korea were evaluated relative to product information such as bean content, price, chromaticity, proximate composition, water binding capacity, swelling power and solubility. Origin of raw materials was 23 in domestic products and 19 in imported products. The price of the product was 3.48 times more for raw soybean flour, 3.34 times more for fried soybean flour, and 3.47 times more for mung bean flour compared to imported soybean. In the domestic products, the lightness of raw soybean flour was higher than roasted soybean flour. The redness and yellowness of roasted soybean flour were higher than raw soybean flour. Moisture content of raw soybean flour was higher than roasted soybean flour, and crude fat, crude protein and carbohydrate content were higher in imported soybean flour. Ash and crude protein contents of mung bean were slightly higher than imported products. Water binding capacity of roasted soybean flour in domestic products was higher than raw soy flour, and there was no significant difference in solubility and swelling power. Correlation between quality characteristics of commercially available soybean and mung-bean flours products was found to be highly significant among measured items, except for solubility.

• Journal of agriculture & life science
• /
• v.52 no.6
• /
• pp.73-79
• /
• 2018

In this study, a torrefaction unit with a capacity of 50 kg/hr was developed and experimented to produce of solid fuel by reuse of the food and agricultural wastes. Dried food wastes and agricultural wastes were used for the experiments and the heated-air torrefaction characteristics were investigated by the raw materials, torrefaction air temperature, and torrefaction time. For the dried agricultural wastes, measured torrefaction capacity and lower heating values were 55.35 kg/hr and 3,333 kcal/kg, respectively. As the lower heating values of the treated samples were greater, by around 7.8%, than those of the non-treated samples, torrefaction process was a very effective method to increase the heating value of the agricultural waste. In case of the dried food waste, torrefaction capacity and lower heating value was measured 88.27 kg/hr and 4,016 kcal/kg, respectively. As the lower heating value of treated ones showed around 9.0% higher than that of non treated ones, torrefaction process is very effective method to increase the heating value of the agricultural waste also. It will be assumed that the heating value shows more higher as increase the air temperature and decrease the moisture content of torrified matter.

• Journal of Animal Science and Technology
• /
• v.47 no.5
• /
• pp.877-890
• /
• 2005

This study was carried out to determine the effect of different growing stages of winter cereal crops on the quality of silage materials and silages. Silages were made from the silage materials harvested at four growing stages(boot, heading, flowering, and yellow ripe) of barley, rye, oat, and wheat. Approximately 1 kg of silage materials harvested from each growing stage stored in vinyl bags with vacuum packing method and fermented at room temperature for 40 days. As the growing stages progressed, the moisture and crude protein contents of the silage materials decreased, and fiber contents(NDF, ADF and hemicellulose) increased. All the silage materials showed significantly higher contents of water soluble carbohydrate in the boot stages than in the flowering and yellow ripe stages. There was no tendency in acetic acid contents of silage materials cut at different growing stages. The overall pH of silage materials were in the range of 5.91-6.01, and there was no significant difference among growing stages. Buffering capacity of silage materials were in the range of 26.23-29.47meq/100g DM, and showed a tendency to decline as the growing stages proceeded. The moisture and crude protein contents of silages decreased significantly in all species as the growing stages proceeded, and the fiber contents vice versa. As the growing stages proceeded, the pH of the silages tended to increase, and the acetic, butyric, and lactic acid contents tended to decrease. The buffering capacity of silages had a tendency to decrease as the growing stages of winter cereal crops proceeded. Therefore, these features described above should be taken into consideration in order to make silages from winter crops economically.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.2
• /
• pp.179-184
• /
• 2020

Elasticity and softness of the skin depend on the level of moisture present in the stratum corneum, which is known to be affected by various environmental changes, such as cold and hot winds and dry environments. However, not many studies have been conducted on changes in skin moisture and the degree of recovery due to individual skin differences. In the present study, we aimed to investigate the effect of warm air heating on skin hydration levels and develop moisturizing formulas to improve lowered skin hydration levels. In order to deliver warm air heating condition, heating dryer (40 ℃, 6 m/s, 30 cm apart from forearm) was applied into inner forearm of healthy subjects (male: 10, female: 39, age: 25 - 63) Among 49 subjects, 26 subjects showed significantly lowered skin hydration levels until 30 min after warm air heating exposure (lowered group). In addition, moisturizing cream with high water holding capacity was applied to forearm of 10 subjects in lowered group for 3 weeks and skin hydration levels after warm air heating were significantly improved at the levels of before application of warm air heating. From this study, we found out that there is a skin type that skin hydration levels are significantly decreased under warm air heating condition (dehydrated skin) and this dehydrated skin can be improved by moisturizing formulas with high water holding capacity.