• Journal of Forest and Environmental Science
• /
• v.26 no.2
• /
• pp.117-129
• /
• 2010

The present study was undertaken in moist temperate forest of Mandal-Chopta area in the Garhwal region of Uttarakhand, India. The aim of the present study was to assess the physical properties of soils in relation to the forest structure and composition. Twelve forest types according to the altitude, slope aspect and species compositions were selected for the study. Physical properties of soil i.e., soil colour, soil texture (per cent of sand, silt and clay), moisture content, water holding capacity, porosity, bulk density (gm/$cm^3$) and void ratio were analyzed for three different depths viz., (i) 'upper' (0-10 cm), (ii) 'middle' (11-30 cm) and (iii) 'lower' (31-60 cm) in all the selected forest types. Phytosociological and diversity parameters viz. total basal cover ($Gha^{-1}$), stem density ($Nha^{-1}$), tree species richness, Simpson concentration of dominance and Shannon-Wiener diversity index were also calculated for each forest type. This study also provides the comparisons between the results of physical analysis of the present study with numerous other previous studies in the temperate Himalayan region of the Uttarakhand.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.207-208
• /
• 2022

Since 1960, the green area has decreased due to rapid urbanization and the artificial surface has increased, and the repair and water function of the previous surface has decreased due to the decrease in rainwater absorption capacity. In addition, the risk of carbon dioxide and fine dust is emerging due to the use of fossil fuels due to urbanization. As a result, permeable blocks, an eco-friendly product, are in the spotlight. Therefore, this study was conducted to examine the strength properties of the permeable block using a hydroball. As a result of the experiment, the flexural strength and compressive strength tended to decrease as the hydroball replacement rate increased. It is judged that the hydroball absorbs a large amount of moisture during the mixing process and lacks moisture required for curing, resulting in a decrease in strength. According to KS F 4419, since the hydroball replacement rate is satisfied up to 20%, further research is needed to analyze the adsorption performance of air pollutants in the future and evaluate their utilization as a permeable block in the future.

• Journal of Animal Science and Technology
• /
• v.65 no.5
• /
• pp.1081-1093
• /
• 2023

This study aimed to compare meat quality traits between Berkshire and crossbreed (Landrace × Yorkshire × Duroc), and to investigate the relationship between meat quality traits and fatty acid composition. 20 Berkshire and 20 crossbreed pigs were used to compare pork loin quality and to determine the relationship between measured variables. 23 variables were measured including proximate composition, pH, drip loss and cooking loss, Warner-Bratzler shear force, and fatty acid composition. Berkshire had higher moisture content, pH, water-holding capacity, saturated fatty acids, and redness than the crossbreed pig (p < 0.05). The fat content and polyunsaturated fatty acid were low (p < 0.05) in Berkshire. Correlation analysis showed a negatively correlation between moisture and fat content, and a positively correlation between saturated fatty acid and fat content. Moreover, saturated fatty acid and polyunsaturated fatty acid were negatively correlated. As a result of factor analysis and partial least square regression, saturated fatty acid and polyunsaturated fatty acid were estimated to be the main factors affecting quality characteristics of pork. Pig breed is associated with differences in meat quality, and fatty acid composition can have an effect on meat quality parameters.

• Food Science and Preservation
• /
• v.31 no.1
• /
• pp.46-63
• /
• 2024

This study evaluated the impact of storage temperature on the quality characteristics of texturized vegetable protein (TVP). TVP was prepared by mixing defatted Daewon soybean flour at 80℃, gluten, and corn starch in a 5:3:2 ratio, which was then extruded at a screw speed of 250 rpm and a barrel temperature of 190℃ with moisture addition at 9 rpm. Subsequently, the extruded TVP was vacuum-sealed in polyethylene packaging and stored at -20℃, 0℃, and 4℃ for 9 days. Texture analysis revealed that the curing rate followed 4℃ > 0℃ > -20℃ sequence. No significant color variation was observed across the storage conditions, although water content increased at all temperatures. Notable changes were detected in moisture absorption capacity (%) and solid leaching (%), following the order of -20℃ > 0℃ > 4℃. The turbidity of the solution released during cooking varied, with the highest to the lowest sequence being -20℃ > 4℃ > 0℃, while pH levels remained neutral. Regarding free amino acids, sweetness and textural quality improved with storage across all temperatures, whereas bitterness components diminished at 4℃. The study suggests that refrigerated storage at 4℃ is a viable method for distributing TVP, which was previously distributed only in a frozen and dry state.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.10
• /
• pp.39-49
• /
• 2011

Recently PBD method, one of acceleration of consolidation methods is used in the soft ground to shorten consolidation time for fast settlement during construction. It is economical and easy to work. Discharge capacity of PBD is sensitive in proportion to thickness of soft ground layer, and drainage of PBD declines due to disturbance effect in surrounding ground by mandrel used for vertical drainage setting and setting machines and type. Also, deviation of discharge capacity is large according to ground condition, construction condition and soil properties. In addition, when embankment loading is not conducted instantly after PBD setting due to rain or lack of embankment material supply, it causes leaving period problems. But cause and analysis of those problems for discharge capacity is lack. So, in this test, ground improvement and discharge capacity is investigated by implementing composite discharge capacity test for analysis of an effect factor of PBD discharge capacity with leaving period. After fixing the vertical drain on a cylindrical cylinder, put churned sample into the cylinder. Then leave 0day, 30day, 60day and 90day. And then, load following the loading step of 30, 70 and 120kPa using a pressure device. As a result, the longer leaving period, discharge capacity is reduced. It is caused by a decrease of discharge area caused by creep transformation moisture absorption of PBD filter after long leaving period.

• International Journal of Advanced Culture Technology
• /
• v.8 no.1
• /
• pp.236-242
• /
• 2020

In this paper, we present the improvement in low moisturizing ability and stability that existing skin softeners have due to the low oil content, by developing skin softener using nanoemulsion of phospholipid liposome, based on the properties of nanoemulsion in cosmetic formulation. In this study, two types of oil; dimethicone (DC 200/6cs) or medium chain triglyceride (MCT), and two kinds of lecithin; unsaturated or saturated were respectively applied to produce nanoemulsion. In the particle size analysis of nanoemulsion, the droplet size of nanoemulsion containing DC200/6cs and unsaturated lecithin was the smallest, and all nanoemulsion showed high stability in the measurement of zeta potential. Therefore, with the smallest particle size and high stability, moisture contents and trans epidermal water loss(TEWL) were measured using the skin softener of DC200/6cs and unsaturated lecithin contained nanoemulsion, and the measurement was compared with the non-oil skin softener and the skin softener with only small amount of oil. The results showed that the moisture content of the skin softener using nanoemulsion increased greatly than other two skin softeners, showing high hydration ability and water retention capacity, and TEWL decreased greatly, therefore preventing the evaporation of moisture from the skin. As a result, the oil content and stability of the skin softener was improved by utilizing nanoemulson based of phospholipid liposome, and it is expected to be used in various ways in cosmetic industry.

• Applied Biological Chemistry
• /
• v.33 no.1
• /
• pp.1-7
• /
• 1990

Starch samples of rice and glutinous rice starches were adjusted to 27 % of moisture and heated at $100^{\circ}C$ for 16 hours, respectively. After the treatment, their physicochemical properties were investigated. The granule shapes of all the starches were polygonal and they became slightly bigger in their sizes after the treatment. All their X-ray diffraction patterns were A types. The specific gravity of the starches decreased to 1.03-1.09 by the treatment. The water binding capacity of rice starches increased, while that of glutinous counterparts slightly decreased. Almost no change in the amount of amylose included was found. Swelling power and solubility were increased with the increase of temperature. At a certain temperature, however, the solubility of the treated starches increased when the swelling power decreased. The initial gelatinization temperatures of Akkibare, Yongmun, and Taebaek starches were $60{\sim}65^{\circ}C$ but those of glutinous rice starch and U.S.A. rice starch were $55{\sim}60^{\circ}C$ and $70{\sim}75^{\circ}C$, respectively, as measured by transmittance. The gelatinization temperature of the treated starches was higher than that of the untreated starches.

• Korean Journal of Food Science and Technology
• /
• v.52 no.4
• /
• pp.357-362
• /
• 2020

This study was conducted to investigate the effects of mushroom composition (0, 4, 8, and 12%) on the quality characteristics of an extruded meat analog. The meat analog blend was isolated soy protein, wheat gluten, and corn starch (50:40:10). The extrusion condition was set to 55% feed moisture, 170℃ barrel temperature, and 150 screw speed by high moisture extrusion using a twin-screw extruder equipped with a cooling die. The integrity index, hardness, cohesiveness, springiness, chewiness, and cutting strength of the meat analog increased with the increasing mushroom content, while its water holding capacity and nitrogen solubility index (NSI) decreased. The protein digestibility decreased with the increasing mushroom content, while the DPPH radical scavenging activity significantly increased. In conclusion, the incorporation of mushrooms into the investigated meat analog enhanced its texture and antioxidant level.

• Journal of Biosystems Engineering
• /
• v.30 no.3 s.110
• /
• pp.155-160
• /
• 2005

The objective of this research was to establish a domestically available cooling storage technique by cold-air in winter, using winter cool air ventilation fur determining rough rice cooling method in the storage and dry bin. The rough rice storage characteristics of two test conditions, winter cool-air ventilation storage and ambient temperature storage, were evaluated from January to July 2001, using a storage and dry bin of 300-ton capacity. Results of this research are as follows: Grain temperature was from $-5.1\~-8.5^{\circ}C$ after winter cool-air ventilation, and grain initial temperature for ambient temperature bin storage was $0.3\~1.9^{\circ}C$. Moisture content of rough rice decreased from $0.28\;to\;0.93\%$ and from $1.53\;to\;1.92\%$ to compare with original moisture contents for winter cool-air ventilation, and for ambient temperature bin storage, respectively. Broken ratio of brown rice from winter cool-air ventilation bin increased from $0.16\;to\; 0.92\%$, and brown rice broken ratio was from $2.24\;to\;2.86\%$ for ambient temperature bin storage to compare with initial broken ratio. Hardness of stored rice increased along storage period increase in alt storage methods, and cooling bin storage increased rice hardness of 0.271kgf: this increasing was lower then the other methods from 0.059 to 2.239kgf. Germination rates were decreased approximately 9.03, 3.14 and $3.20\%$ for upper, middle, and bottom of ventilating winter air bin, respectively, and germination rates of 2.70, 3.47 and $4.14\%$ were approximately decreased for upper, middle, and bottom parts of ambient temperature bin storage, respectively.

• Journal of Biosystems Engineering
• /
• v.32 no.1 s.120
• /
• pp.13-19
• /
• 2007

Storage rough rice in low temperature using the winter cold air avoids rough rice temperature increase which happens from early May, and this is possible by installing a cooling system in the top of a bin, the room between top rice level and bin ceiling. The research objective is to establish low temperature rough rice storage technique, furnishing winter cold air to rough rice, by investigating the cooling system potential of maintaining low rough rice temperature and by analyzing rough rice storage characteristics over a storage period. The rough rice storage characteristics were evaluated from January to August 2003, using a storage and dry bin of 400-ton capacity. Results of this research are as follows: Cooling bin using the cooling system in the top of the bin maintained the rice temperature less than 15$^{\circ}C$ in entire portions in August. Moisture contents and germination rates of rough rice were decreased over the storage period, on the other hand, the rough rice stored in the ambient temperature bin had relatively lower moisture contents and germination rates to compare with the bin using winter cold air. Crack ratio and acid value of brown rice in the ambient temperature bin storage had increased more than the cooling bin storage. The result indicates that the storage bin using winter cold air and the cooling system maintains moisture content and germination of rice, minimizes cracked kernel and acid value, and preserves rice quality as well.