• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.4
• /
• pp.417-423
• /
• 2002

The edible films were prepared from the protein of alaska pollack, Theragra chalcogrmma. Effects of plasticizer, cross linker and laminated film on physical properties such as tensile strength (TS), elongation (E) and water vapor permeability (WVP) of films were investigated. In adding various kinds of plasticizers, TS of the films prepared with propylene glycol (PG) was the highest, and followed sorbitol, polyethylene glycol 200 (PEG 200) and glycerol. Elongation of the films prepared with glycerol was the highest, then sorbitol, PEG 200 and PG. WVP of films showed lower in order of PG, sorbitol, glycerol and PEG 200.75 decreased with the increment of plasticizer concentration, but elongation increased, The addition of both PG and PEG 200 effected weakly on elongation, so they were inadequate as plasticizer for the film. Mixtures of glycerol and sorbitol, which showed opposing both TS and elongation in the films, could control the physical properties of the films. With increasing relative humidity, TS decreased, while elongation and equilibrium moisture content increased. By adding the cross linkers such as ascorbic acid, citric acid and succinic acid, TS and m of films increased, while elongation decreased. Ascorbic acid, citric acid, succinic acid were most effective for TS at 0.2, 0.1 and $0.1\%, respectively. Laminated film with alaska pollack protein and corn zein improved TS above two times, reduced WVP about $20\~30\%$, as compared with the Elm from alaska pollack protein. Two films did not show the difference to oxygen permeability, but they showed about tenfold greater oxygen resistance than polyethylene film. Laminated film showed higher b and $\Delta$E value of color difference, lower a and L value than the film from alaska pollack protein.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.8 no.4
• /
• pp.222-224
• /
• 1975

Three strains of common carp, i. e. , Israeli carp, red-and-white, and golden strains, were stocked in the same pond, and their growth rates were compared with following results: From August 12 to November 21 in 1975, fingerlings of the three strains of common carp, Cyprinus carpo, each weighing about 0.5 g with total length of 2 to 3 cm, were stocked. The pond had an area of $316m^2$ with a mean water depth of 55cm, and the bottom was covered with a 20 to 30 cm thick layer of silt containing a considerable amount of decaying organic materials. Feed given was prepared with equal amounts of fish meal and polished barley, of which, in addition, $10\%$ green grass and $1\%$ table salt were mixed together when prepared into paste feed using a chopper after boiling the barley. Total protein content of the feed was $34.9\%$ in dry state with $5\%$ moisture content. Total feed given was 30.08 kg calculated in dry state to produce 20.588 kg of the common carp fingerlings, thus the feed coefficient being 1.51. By strains, the harvested Israeli carp ranged 98 to 311g each with a mean weight of $172.69g(100\%)$, red-and-white strain 15 to 318g with mean of $104.1g(60.3\%)$, and the golden strain 30 to 268g with mean of $128.7g(74.6\%)$. During the rearing season mean water temperature was $23.9^{\circ}C$ and the assumed main growth period with the water temperature above $15^{\circ}C$ was, upto the end of October, for 80 days with a mean water temperature of $23.9^{\circ}C$. Taking this main growth period as the basis for growth rate analysis, the mean daily increments, expressed as the attained body weight in times of the starting weight, become 1.075786 times (or the Israeli strain, 1.06901 times for the red-and-white strain, and 1.07185 times for the golden strain.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.6
• /
• pp.840-845
• /
• 2007

The chromaticity, mechanical, and sensory properties of madeleine were investigated during its manufacturing process based on additions of black bean chungkukjang flour containing functional health ingredients and a high nutritient value. 1. The moisture content decreased with increasing content of the chungkukjang flour$(16.1{\sim}13.7%)$. 2. The brightness of the Madeleine decreased significantly from 75.24 to 53.61 by increasing the content of the black bean chungkukjang flour. The degree of red color increased significantly from -0.31 to 4.93 by increasing the content of the black bean chung kukjang flour. 3. For the mechanical properties, the hardness increased significantly with increasing amounts of the black bean chungkukjang flour (p<0.05). The degree of fracturability, adhesiveness, and gumminess also increased with the increasing the content, but the fracturability showed no difference by either addition. The springiness and cohesiveness decreased significantly by increasing the content of the black bean chungkukjang flour, showing an opposite result compared to the hardness. 4. The results of the sensory evaluation indicated significant differences in color among the samples(p<0.05). The color of the madeleine samples with added black bean chungkukjang flour was more preferred than that of the sample without any additive. The degree of preference increased in the order of the quantity of the additive. The moistness and softness became significantly drier and less soft, respectively, with an increasing quantity of the black bean chungkukjang flour (p<0.05). For the overall acceptance, the BC10 sample added with 10% of black bean chungkukjang flour added had the highest acceptance. This may be because it did not have a strong chungkukjang odor and had the fewest differences from the control Madeleine without the additive, in terms of its moistness and softness. Based upon these results, adding10 % of black bean chungkukjang flour in the manufacture of Madeleine is an appropriate quantity with regard to its structural and sensory characteristics.

• Culinary science and hospitality research
• /
• v.21 no.4
• /
• pp.1-15
• /
• 2015

For the consumption extension of Chinese artichoke(Stachys sieboldii MIQ), the quality characteristics and sensory evaluation of white pan bread prepared with different levels of added Chinese artichoke powder(0, 3, 6, 9, and 12%) were investigated. Volume changes of dough, moisture contents(p<0.001), and baking loss rate(p<0.001) decreased with increasing levels of Chinese artichoke powder. In addition, with an increase in the level of Chinese artichoke powder, the volume and specific volume of white pan breads significantly decreased(p<0.001 and p<0.001, respectively) whereas the weight of white pan breads significantly increased (p<0.001). In terms of color, the lightness(L) decreased, but the redness(a) and yellowness(b) increased with increasing Chinese artichoke powder levels(p<0.001). From the texture profile analysis(TPA) of white pan breads, hardness, chewiness(p<0.05), gumminess(p<0.001), and adhesiveness(p<0.001) increased whereas springiness and cohesiveness(p<0.01) decreased according to the levels of added Chinese artichoke powder. In the attribute difference test, crumb color(p<0.001), grain size(p<0.05) decreased whereas grain uniformity, yeast flavor, acridity flavor(p<0.001), plainer taste(p<0.05), sweet taste(p<0.01), acridity taste(p<0.001), firmness, springiness, moistness, softness, and chewiness increased in accordance with levels of added Chinese artichoke powder. Overall acceptability showed that the sample containing 9% Chinese artichoke powder had the highest score (p<0.001). As a result, the optimal ratio of Chinese artichoke powder for white pan bread was determined to be 9%.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.7
• /
• pp.1103-1108
• /
• 2005

A new type of surimi gel was prepared by adding the crab paste to the original Alaska pollock surimi, and its characteristics were determined. With increased addition of crab paste to the surimi, moisture $(81.3\;to\;79.1\%)$ and protein content $(12.2\;to\;11.6\%)$ of surimi gels slightly decreased while ash content increased compared to commercial surimi gel. Color values of surimi gels were decreased in lightness (L value, 67.3 to 63.5) but increased in redness (a value, -3.5 to 7.14). Thus, crab paste-added surimi gel was a little darked reddish product. Maximum values of breaking force and deformation of $10\%$ added surimi gel were 568g and 13.1mm, respectively. Sensory scores on color and flavor increased according to the increasing of additional ratios, whereas texture scores was maximum at $10\%$ added surimi gel. From the results of physical properties and sensory evaluation, desirable additional ratio was $10\%$. Total amino acid content (11,435 mg/100g) of $10\%$ added surimi gel was approximately $5\%$ less than non-added surimi gel, and major amino acids were aspartic acids, glutamic acid, leucine and lysine. Exceptionally, cysteine content of $10\%$ added surimi gel was 2 times higher than control (surimi gel without crab paste). Calcium and phosphorus contents of $10\%$ crab paste-added surimi gel were 172:4mg/l00g and 234.6 mg/100g, respectively, and their ratio (1:1.4) was in the optimal range in the body absorbtion efficiency.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.4
• /
• pp.539-549
• /
• 2012

In order to acquire basic data on the development of squid processing food, we investigated changes in the composition of boiled squid upon heat treatment ($100^{\circ}C$), acid treatment (acetic acid, 0~5%), and pre-boiling ($55^{\circ}C$, $80^{\circ}C$). The proximate composition of squid was 73~78% moisture and 19~24% crude protein, treatment with acid solution had a significant effect on the proximate composition of boiled squid (p<0.05). The major free sugars were ribose and glucose in all treatment samples. The $55^{\circ}C$ pre-boiled sample had lower levels of glucose than the other samples. The total free sugar content of the non-peeled sample was the highest, followed by the $80^{\circ}C$ pre-boiled sample, whereas the sugar content in the $55^{\circ}C$ pre-boiled sample was very low. With regards to amino acid content, proline was the highest in all samples, followed by taurine and histidine. Treatment with acid solution had a significant effect on the total free amino content of boiled squid (p<0.05). The total free amino acid content of the $55^{\circ}C$ pre-boiled sample was the highest, followed by the $80^{\circ}C$ pre-boiled sample and non-peeled sample. Inosine and related compounds were not detected in any of the samples, and the adenosine triphosphate (ATP) content was low. The hypoxanthine contents of the $55^{\circ}C$ and $80^{\circ}C$ pre-boiled samples were the highest, the adenosine monophosphate (AMP) and inosine monophosphate (IMP) contents were similar, and the IMP content of the non-peeled sample was higher than those of the peeled samples. The palmitic acid content was very high and constituted 40% of total saturated fatty acids. eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) contents were also high and constituted 60% of total unsaturated fatty acids. Of these, DHA content was the highest, followed by palmitic acid and EPA, which accounted for about 85% of total fatty acids. No difference in fatty acid content was observed between acid treatment and pre-boiling. The mineral P content was the highest on average in all boiled squid samples, followed by K, Na, Mg, and Ca contents. In addition, the pre-boiling temperature and acid solution concentration had significant effects on the mineral content. Further, heavy metal, Cd, Pb, and As contents were detected only at trace amounts, and their levels were lower than standard and permissible amounts for food.

• Korean Journal of Environment and Ecology
• /
• v.28 no.6
• /
• pp.762-768
• /
• 2014

The purpose of this study is to analyze the soil $CO_2$ efflux and micro-climate of a preserved forest area located in a Mt. bulam urban nature park Quercus acutissima stand from June 2013 to May 2014. The research showed that the soil and heterotrophic $CO_2$ efflux were $28.14{\pm}7.99$ to $582.47{\pm}318.51$ and $12.32{\pm}8.04$ to $415.71{\pm}159.92mg\;CO_2{\cdot}m^{-2}{\cdot}h^{-1}$, respectively. In addition the seasonal soil $CO_2$ efflux of summer, autumn, winter, spring were 1169.1, 454.81, 72.08 and $494.23g\;CO_2{\cdot}m^{-2}{\cdot}month^{-1}$, respectively. On the other hand, the seasonal heterotrophic $CO_2$ efflux were 526.20, 340.09, 45.13 and $374.9g\;CO_2{\cdot}m^{-2}{\cdot}month^{-1}$, respectively. Moreover, the annual soil and heterotrophic $CO_2$ efflux was found to be 2190.22 and $1286.33g\;CO_2{\cdot}m^{-2}{\cdot}yr^{-1}$, respectively. The exponential function was also utilized for the regression analysis in order to correlate the environmental factors with the soil and heterotrophic $CO_2$ efflux. It was found out that both air and soil temperatures were positively correlated with the soil and heterotrophic $CO_2$ efflux. However, the amount of solar radiation and soil moisture has showed low correlation for both types of $CO_2$ efflux. Contribution of root $CO_2$ efflux to total soil $CO_2$ efflux in this Quercus acutissima stand was 33.60%.

• Progress in Medical Physics
• /
• v.23 no.4
• /
• pp.269-278
• /
• 2012

Aquaplast Thermoplastic (AT) is a tissue-equivalent oral compensator that has been developed to improve dose uniformity at the common boundary and around the treated area during radiotherapy in patients with head and neck cancer. In order to assess the usefulness of AT, the degree of improvement in dose distribution and physical properties were compared to those of oral compensators made using paraffin, alginate, and putty, which are materials conventionally used in dental imprinting. To assess the physical properties, strength evaluations (compression and drop evaluations) and natural deformation evaluations (volume change over time) were performed; a Gafchromic EBT2 film and a glass dosimeter inserted into a developed phantom for dose verification were used to measure the common boundary dose and the beam profile to assess the dose delivery. When the natural deformation of the oral compensators was assessed over a two-month period, alginate exhibited a maximum of 80% change in volume from moisture evaporation, while the remaining tissue-equivalent properties, including those of AT, showed a change in volume that was less than 3%. In a free-fall test at a height of 1.5 m (repeated 5 times as a strength evaluation), paraffin was easily damaged by the impact, but AT exhibited no damage from the fall. In compressive strength testing, AT was not destroyed even at 8 times the force needed for paraffin. In dose verification using a glass dosimeter, the results showed that in a single test, the tissue-equivalent (about 80 Hounsfield Units [HU]) AT delivered about 4.9% lower surface dose in terms of delivery of an output coefficient (monitor unit), which was 4% lower than putty and exhibited a value of about 1,000 HU or higher during a dose delivery of the same formulation. In addition, when the incident direction of the beam was used as a reference, the uniformity of the dose, as assessed from the beam profile at the boundary after passing through the oral compensators, was 11.41, 3.98, and 4.30 for air, AT, and putty, respectively. The AT oral compensator had a higher strength and lower probability of material transformation than the oral compensators conventionally used as a tissue-equivalent material, and a uniform dose distribution was successfully formed at the boundary and surrounding area including the mouth. It was also possible to deliver a uniformly formulated dose and reduce the skin dose delivery.

• Food Science and Preservation
• /
• v.10 no.4
• /
• pp.476-481
• /
• 2003

As its high functional properties to be used as medicine or food, the cultivation of Agaricus mushroom has been expanded and iぉ commercialization required better storage methods that can extend its functional and nutritional value for longer period. We selected drying as the most plausible method to meet such requirement, and several drying conditions were investigated to locate the optimum drying condition that can be used to keep the quality of mushroom. Drying temperature of 50$^{\circ}C$, 60$^{\circ}C$, 100$^{\circ}C$ were selected to trace the drying time required to achieve the moisture content of mushrooms less than 10%. The drying temperature at 50$^{\circ}C$ required 29 hrs of drying time, while 100$^{\circ}C$ required only 10 hrs of drying tune. However, their quality characteristics on the following categories, on the degree of browning and color were investigated to find the optimum drying condition. In addition, sensory evaluation was conducted to evaluate the quality of dried mushrooms produced by each drying condition. The browning of the mushroom was evidently increased as the higher drying temperature was used and 50$^{\circ}C$ drying produced the most desirable quality of all in pileus or stipe. The aeon of browning intensified by drying temperature was comparable to the result of whiteness index value, which resulted lower L values as drying temperature increased. and the 50$^{\circ}C$ drying resulted the most highest L values among all drying samples. As the browning and whiteness results implied, the sensory evaluation result gathered from the present research indicated that the 50$^{\circ}C$ drying was the most favorable drying condition by scoring the most highest average scores on flavors, color, appearance, and overall acceptability conducted by the 10 evaluation panels.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.3
• /
• pp.311-321
• /
• 2008

In order to improve the insufficient protein content of Jeung-Pyun with respect to sitology, as well as its fermentation process, this study prepared Jeung-Pyun doughs containing 0, 5, 10, 15, and 20 g of milk, respectively, and examined their mechanical and functional characteristics. The internal structure of the Jeung-Pyun was observed by SEM. With regard to color, the L-value increased with increasing amounts of added milk, and the highest value (65.43) occurred in the group containing 20 g of added milk; however, there were no significant differences among groups. The group containing 20 g of added milk also presented the highest a-value, and the samples with added milk had higher b-values than the control. At 8 hours of fermentation, the 10 g- and 15 g-added milk groups had viscosities of 5726.67 and 6600 respectively; viscosity increased with increasing amounts of milk, and the added-milk groups had significantly higher values than the control group. Hardness also increased with increasing amounts of added milk. However, there were no significant differences in resilience and cohesive power among the groups. The groups containing 5 and 10 g of added milk had the lowest cohesion and break values. For appearance, the group without added milk had the whitest color. Pore size decreased and showed less uniformity as the amount of added milk increased. The unique tackju aroma of Jeung-Pyun decreased significantly as the level of added milk increased, and the 20 g addition presented the lowest value. The 10 g-added milk group had the highest level of sweetness, and sourness increased with increasing amounts of added milk. For softness, the control group was estimated as slightly softer than the added-milk groups. The stickiest sample was generally preferred when considering taste, white color, and sweetness. Among the quality characteristics, having greater stickiness, resilience, moisture, and softness was better in terms of chewing. Overall, the size of the Jeung-Pyun containing 10 g of milk was even and well-developed.