• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.257-262
• /
• 2008

In this paper, we study the electric characteristics of shading effects in photovoltaic module in case of outdoor operation. When fabricating PV module, solar cells are connected serially to obtain the high voltage because of its low open circuit voltage. And total current is determined by lowest current among solar cells. When the shading happens on PV module's surface, the current of shaded solar cell determine the total current flow. Because of this, generally by-pass diode is installed on junction box. The bypass diode operate when revered and shaded solar cell's voltage is over 0.6 voltage. The reverse-biased solar cell gives reduced maximum power of PV module and might give negative effect on durability. So, adequate by-pass installation and selection is needed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1853-1859
• /
• 2008

IGBT modules are designed for low loss, rugged for all environments and user friendly. Low on state saturation voltage with high switching speed is the primary concerns. In this paper selection of IGBT, module ratings and characteristics are discussed. The IGBT design topic of protection against over voltage and over current are covered. Emphasis on turn off switching, short circuit switching and necessary precautions are dealt. Selection of IGBT device, gate drive power, and its lay out considerations are covered in detail.

• 한국콘텐츠학회논문지
• /
• 제12권5호
• /
• pp.22-31
• /
• 2012

스마트폰은 일반 휴대폰의 기능에 컴퓨터 기능을 추가한 지능형 단말기로 사용자의 요구를 수행하기 위해 처리능력이 뛰어난 프로세서와 다양한 통신모듈(DMB, Wi-Fi, 블루투스, NFC 등)을 내장하고 있다. 하지만, 제한되어 있는 배터리 전력을 프로세서와 내장된 통신모듈이 지속적으로 사용하게 된다면 배터리의 수명은 비례하여 줄어들게 된다. 따라서 시스템 실행 및 통신모듈 디바이스별 전력소모량 관리는 연구분야에서 중요한 이슈 중 하나이다. 본 논문에서는 스마트폰 환경에서 배터리 절감을 위하여 에너지소모량, 전송시간을 고려하여 통신모듈을 자동 제어하는 기법을 제안한다. 본 시스템은 통신모듈을 자동선택하는 기능 뿐만 아니라 휴면모드 시 에너지 소모가 큰 블루투스를 제어함으로 효과적인 에너지관리와 사용자 편의성을 높이는 결과를 얻을 수 있었다. 실험 결과 20%의 에너지 절감효과를 얻을 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.569-574
• /
• 2002

As consumer's desire becomes various, agility of mold manufacturing is most important factor for competence of manufacturer. In common works to use commercial CAM system to generate tool path, some decision making process is required to produce optimal result of CAM systems, The paper proposes a methodology for computer-assisted tool selection procedures for various cutting type, such as rough, semi-rough and finish cuts. The system provides assist-tool-items for machining of design model part of injection meld die by analyzing sliced CAD model of die cavity and core. Also, the generating NC-code of the tool size is used to calculate machining time. The system is developed with commercial CAM using API. This module will be used for optimization of tool selection and planning process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.175-179
• /
• 1997

As consumer's desire becomes various, agility of mold manufacturing is most important factor for competence of manufacturer. In common works to use commercial CAM system to generate tool path, some decision making process is required to produce optimal result of CAM systems. We propose tool selection procedures to aid the decision making process. The system provides available tool size for machining of design model part of injection mold die by analyzing sliced CAD model of die cavity and core. Also, the tool size information is used to calculate machining time. The system is developed with commercial CAM using API. This module will be used for optimization of tool selection and planning process.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2021년도 춘계학술발표대회
• /
• pp.323-325
• /
• 2021

In this article, we have improved the prediction of hypertension detection using the feature selection method for the Korean national health data named by the KNHANES database. The study identified a variety of risk factors associated with chronic hypertension. The paper is divided into two modules. The first of these is a data pre-processing step that uses a factor analysis (FA) based feature selection method from the dataset. The next module applies a predictive analysis step to detect and predict hypertension risk prediction. In this study, we compare the mean standard error (MSE), F1-score, and area under the ROC curve (AUC) for each classification model. The test results show that the proposed FIFA-OE-NB algorithm has an MSE, F1-score, and AUC outcomes 0.259, 0.460, and 64.70%, respectively. These results demonstrate that the proposed FIFA-OE method outperforms other models for hypertension risk predictions.

• 한국항공우주학회지
• /
• 제50권1호
• /
• pp.31-38
• /
• 2022

위성용 TR모듈이 지상용 또는 항공용 TR모듈과 다른 점은 높은 레벨의 진동, 충격과 같은 발사환경과 우주방사능, 진공, 온도 변화와 같은 궤도환경 고려가 필요하다는 것이다. 따라서 지상용 또는 항공용 요구사양과는 다른 전기적, 구조적 조건을 요구한다. 이에 따라 서론에서는 발사환경, 궤도환경에 대해서 서술하고, 본문에서는 위성용 TR모듈에서 GaN의 활용과 요구되는 조건을 충족하기 위한 설계 과정을 기술한다. 특히, 부품선정부터 Derating&RF Budget 설계, 공정설계, 열해석까지 각각 단계에서 고려할 설계요소에 대해서 서술한다.

• Water Engineering Research
• /
• 제5권4호
• /
• pp.157-176
• /
• 2004

This research presents a prototype development and implementation of Decision Support System (DSS) for integrated river basin water management for the flood control. The DSS consists of Relational Database Management System, Hydrologic Data Monitoring System, Spatial Analysis Module, Spatial and Temporal Analysis for Rainfall Event Tool, Flood Forecasting Module, Real-Time Operation of Multi Reservoir System, and Dialog Module with Graphical User Interface and Graphic Display Systems. The developed DSS provides an automated process of alternative evaluation and selection within a flexible, fully integrated, interactive, centered relational database management system in a user-friendly computer environment. The river basin decision-maker for the flood control should expect that she or he could manage the flood events more effectively by fully grasping the hydrologic situation throughout the basin.

• 한국언어정보학회지:언어와정보
• /
• 제7권1호
• /
• pp.23-40
• /
• 2003

In this paper, we have proposed Auto-TUS, an automatic transcription module of three union symbols-hyphen, dash and tilde (‘­’, ‘―’, ‘∼’)-using their linguistic contexts. Few previous studies have discussed the problems of ambiguities in transcribing symbols into Korean alphabetic letters. We have classified six different reading formulae of the union symbols, analyzed the left and right contexts of the symbols, and investigated selection rules and distributions between the symbols and their contexts. Based on these linguistic features, 86 stereotyped patterns, 78 rules and 8 heuristics determining the types of reading formulae are suggested for Auto-TUS. This module works modularly in three steps. The pilot test was conducted with three test suites, which contains respectively 418, 987 and 1,014 clusters of words containing a union symbol. Encouraging results of 97.36%, 98.48%, 96.55% accuracy were obtained for three test suites. Our next phases are to develop a guessing routine for unknown contexts of the union symbols by using statistical information; to refine the proper nouns and terminology detecting module; and to apply Auto-TUS on a larger scale.

• 디지털산업정보학회논문지
• /
• 제4권3호
• /
• pp.77-83
• /
• 2008

In this paper, CPLD low power technology mapping for reuse module design under the time constraint is proposed. Traditional high-level synthesis do not allow reuse of complex, realistic datapath component during the task of scheduling. On the other hand, the proposed algorithm is able to approach a productivity of the design the low power to reuse which given a library of user-defined datapath component and to share of resource sharing on the switching activity in a shared resource. Also, we are obtainable the optimal the scheduling result in experimental results of our using chaining and multi-cycling in the scheduling techniques. Low power circuit make using CPLD technology mapping algorithm for selection reuse module by scheduling.