• 한국태양에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.92-97
• /
• 2009

It is more necessary to consider the various factors for developmenting visible PV module of alternative window than traditional PV module. It must have sufficient performance which is Tvis, daylighting, daylight factor, glare index. so that more needs to consider suitable plan and total evaluated technology. Under the this background. For using commonly a combination BIPV module system and Daylinghting that can alternative architectural window, our goal on this study is drawing proper window area ratio as the window by analyzing lighting performance and glare index depending on transmittance of DSSC. On this study, we drew the result about window area ratio that can apply in the building when applying DSSC in the window. In situation that window is alternated as curtain wall in atrium that has big Widow area, if applying red 15.8% DSSC of low transmittance, it is expect to proper because it is suitable illumination standard and doesn't occur a discomfort glare. In case of office, we propose to apply red 33.2% or blue 35.2% DSSC of high transmittance for no affecting lighting load. we expect to contribute to select proper and effective window when applying the window in the building by drawing the window area ratio that can apply in thee building depending on transmittance of DSSC and offering the glare index data.

• Land and Housing Review
• /
• v.3 no.2
• /
• pp.187-193
• /
• 2012

A technology that newly attract attention in the area of energy-related study is the energy harvesting(or scavenging) technology. In this paper, the performance of power generation for the energy harvesting block with a combination of piezoelectric technology and electromagnetic technology among various energy harvesting technologies was investigated. The goal of this study is to evaluate on the applicability of our developed energy harvesting block into the field of urban & housing. First, we evaluated the performance of power generation for the multi-layer energy harvester at laboratory scale. Second, we described the features of our developed prototype module that includes amplification technologies to improve power density per module and evaluated the performance of power generation for the energy harvesting block in a variety of ways. From the test results, the developed product increased the performance of power generation up to 255% or 505% compared to the existing product and its superiority were shown. Finally, we suggested the direction for the improvement of the energy harvesting block module.

• Environmental Engineering Research
• /
• v.10 no.5
• /
• pp.247-256
• /
• 2005

A combination of the submerged membrane activated-sludge bioreactor(SMABR) equipped with non-woven fabric filter and oyster-zeolite (OZ) packed-bed adsorption column was studied to evaluate the advanced tertiary treatment of nitrogen and phosphorous. The non-woven filter module was submerged in the MBR and aeration was operated intermittently for an optimal wastewater treatment performance. Artificial wastewater with $COD_{Cr}$ of 220 mg/L, total nitrogen (T-N) of 45 mg/L, and total phosphorous (T-P) of 6 mg/L was used in this study. MLSS was maintained about $4,000\;{\sim}\;5,000\;mg/L$ throughout the experiments. The experiments were performed for 100-day with periodic non-woven filter washing. The results showed that $COD_{Cr}$ could be effectively removed in SMABR alone with over 94% removal efficiency. However, T-N and T-P removal efficiency was slightly lower than expected with SMABR alone. The permeate from SMABR was then passed through the OZ column for tertiary nutrients removal. The final effluent analysis confirmed that nutrients could be additionally removed resulting in over 87% and 46% removal efficiencies for T-N and T-P, respectively. The results of this study suggest that the waste oyster-shell can be effectively reclaimed as an adsorbent in advanced tertiary wastewater treatment processes in combination with SMABR equipped with non-woven fabric filter.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.05a
• /
• pp.395-398
• /
• 2006

무선 인터넷 기술의 발달과 함께 이동 컴퓨팅 환경에서 수치지도를 신속하게 출력하고, 이동 지역에 대한 수치지도를 무선 인터넷을 이용하여 클라이언트에 신속하고 효과적으로 전달하기 위해서 국립지리정보원에서 제공하는 수치지도의 경량화가 필요하다. 또한 인터넷의 방대한 자료를 지리정보시스템에서 효과적으로 이용할 수 있도록 화면상에 출력된 수치지도의 특정 건물이나 지역에 URL를 저장시키고, URL이 삽입된 수치지도상의 특정지역에서 사용자의 간단한 조작만으로 웹 사이트에 접속할 수 있도록 본 논문에서는 지리정보와 웹 정보의 연동을 위한 시스템을 설계 및 구현한다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.219-222
• /
• 2009

Microgrid is a small-scale power system composed of distributed generators, energy storage system and loads, and can operate in the grid-connected mode and the islanded mode. This paper presents optimal design procedures for remote microgrid. The design program is based on the economic evaluations including the feasibility study module, optimal combination and allocation of DER, power network design and the reduction of the GHG emmission. This program which is suggested in this paper shows good performance as a tool of remote microgrid design.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.1
• /
• pp.60-67
• /
• 2000

An improved disturbance rejection control scheme is presented for minimizing the position error due to the repeatable runout disturbances in high density disk drive systems The proposed control algorithm is capable of attenuating repeatable disturbances which is one of the major detractors to hard disk drive quality and performance. This is achieved by a sys-tematic combination of an optimal feedback component and a feedforward preview component. The feedback component is designed where the emphasis is placed on robustness. The feedforward component is on the basis of a preview control comprised of a measured disturbance signals which leads to better disturbance rejection capabilites. The designed con-troller is applied as a plug-in module to a high density hard disk drive with a pre-existing conventional servo controller. Simulations have been carried out to demonstrate the effectiveness of this control scheme in the reduction of the periodic disturbances.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.4
• /
• pp.160-166
• /
• 2002

Since conventional mobile robot control with one module has limitation to solve complex problems, there have been a variety of works on combining multiple modules for solving them. Recently, many researchers attempt to develop mobile robot controllers using artificial life techniques. In this paper, we develop a mobile robot controller using cellular automata based neural networks, where complex tasks are divided to simple sub-tasks and optimal neural structure of each sub-task is explored by genetic algorithm. Neural network modules are combined dynamically using the action selection mechanism, where basic behavior modules compete each other by inhibition and cooperation. Khepera mobile robot simulator is used to verify the proposed model. Experimental results show that complex behaviors emerge from the combination of low-level behavior modules.

• Journal of Electrochemical Science and Technology
• /
• v.3 no.4
• /
• pp.149-153
• /
• 2012

Among the various solar-hydrogen production techniques a combination of a photovoltaic (PV) and an electrolytic cell into one single system, a monolithic PV-electrolytic cell, has been suggested as a promising one in terms of efficiency and stability. In this mini-review, we describe our recent efforts on the fabrication of the monolithic PV-electrolytic cell. Particularly, we focus on the electrocatalysts for water oxidation and its fabrication method suitable for a monolithic PV-electrolytic cell. We also introduce proto-type devices with a dye-sensitized solar cell module and an InGaP/GaAs photoelectrodes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.266-269
• /
• 2003

TFT LCD mode has some well-documented performance limitations, namely limited viewing angle, inversion of the gray scale levels and poor luminance efficiency because of the necessity of using crossed polarisers attached to the display cell. During the last few years many initiatives have been undertaken to solve these problems by incorporation birefringent films of various designs into the LCD module. Controlling the optical performance of LCDs often requires combination of liquid crystal material properties, cell parameters and optical films. Such optical films have traditionally been made with stretched polymer materials such as polycarbonate, but recently coated liquid crystalline materials have been used to give improved optical films which can greatly enhance the performance of LCDs. We have now developed reactive mesogen materials to add ultra-thin optical layers into the display structure, and these allow the potential for many new applications.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.2
• /
• pp.93-102
• /
• 2010

The FMCW(Frequency Modulation Continuous Wave) radar possesses range-velocity ambiguity to identify the correct combination of beat frequencies for each target in the multi-target situation. It can lead to ghost targets and missing targets, and it can reduce the detection probability. In this pap er, we propose an effective identification algorithm for the correct pairs of beat frequencies and the signal processing hardware architecture to effectively support the algorithm. First, using the correlation of the detected up- and down-beat frequencies and Doppler frequencies, the possible combinations are determined. Then, final pairing algorithm is completed with the power spectrum density of the correlated up- and down-beat frequencies. The proposed hardware processor has the basic architecture consisting of beat-frequency registers, pairing table memory, and decision unit. This method will be useful to improve the radar detection probability and reduce the false alarm rate.