• Journal of Communications and Networks
• /
• v.16 no.2
• /
• pp.110-120
• /
• 2014

This article proposes a spectrum sharing method which can avoid the mutual interference in both primary and secondary systems. The two systems make them a priority to use two single-dimension orthogonal signals, the real and imaginary pulse amplitude modulation signals, if the primary system is not in outage with this use. A secondary transmitter is selected to be the primary relay and the active secondary source to perform this. This allows a simultaneous spectrum access without any mutual interference. Otherwise, the primary system attempts to use a full two-dimensional signal, the quadrature amplitude modulation signal. If there is no outage with respect to this use, the secondary spectrum access is not allowed. When both of the previous attempts fail, the secondary system is allowed to freely use the spectrum two whole time slots. The analysis and simulation are provided to analyze the outage performance and they validate the considerable improvement of the proposed method as compared to the conventional one.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.425-435
• /
• 2016

This paper describes a spread-spectrum clock generation method by utilizing a ${\Delta}{\Sigma}$ digital PLL (DPLL) which is solely based on binary phase detection and does not require a linear time-to-digital converter (TDC) or other linear digital-to-time converter (DTC) circuitry. A 1-bit high-order ${\Delta}{\Sigma}$ modulator and a hybrid finite-impulse response (FIR) filter are employed to mitigate the phase-folding problem caused by the nonlinearity of the bang-bang phase detector (BBPD). The ${\Delta}{\Sigma}$ DPLL employs a two-point modulation technique to further enhance linearity at the turning point of a triangular modulation profile. We also show that the two-point modulation is useful for the BBPLL to improve the spread-spectrum performance by suppressing the frequency deviation at the input of the BBPD, thus reducing the peak phase deviation. Based on the proposed architecture, a 3.2 GHz spread-spectrum clock generator (SSCG) is implemented in 65 nm CMOS. Experimental results show that the proposed SSCG achieves peak power reductions of 18.5 dB and 11 dB with 10 kHz and 100 kHz resolution bandwidths respectively, consuming 6.34 mW from a 1 V supply.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7A
• /
• pp.554-561
• /
• 2009

In this paper, we propose a novel Vehicular Ad-hoc Network(VANET) which includes communication and ranging features, using Spread Spectrum(SS) multi-carrier modulation scheme. In existing methods, a spread spectrum technique was used to communicate with other vehicles and raging was possible by detecting phase difference between transmission/reception of the PN signal. However, the use of high-speed PN signals is mandatory to detect possible errors of phase difference and to increase the analysis capacity. In the proposed system, multi-carrier modulation scheme was used as solution of mentioned problem. The multi-carrier modulation scheme uses smaller PN signal and chip-rate than the single-carrier modulation, so it is possible to send multiple carrier waves using the same frequency range. This technique (multiple carrier waves) allows to have the Equal Gain Combing (EGC) diversity effect, providing better result in phase difference error detection and raging accuracy.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.3
• /
• pp.192-199
• /
• 2018

This paper proposes an improved discrete Fourier transform spread single sideband(DFT-s-SSB) orthogonal frequency division multiplexing(OFDM) system that solves the problems of conventional DFT-s-SSB OFDM systems. Conventional DFT-s-SSB systems use pulse amplitude modulation(PAM) for applying SSB modulation. The higher the modulation level, the worse is the BER performance. Further, transmission is possible only through the lower sideband(LSB) spectrum. When transmitting using the LSB and upper sideband(USB) spectra simultaneously, interference occurs and spectrum recovery is not performed correctly. To solve this problem, the proposed system applies the 2/3 convolution coding to improve the bit error rate(BER) performance, adjusts the DFT size, and selects the USB spectrum to utilize the remaining spectrum resources. In addition, when using this system in an environment that supports multiuser or limited bandwidth, it uses only half of the spectrum; therefore, it can utilize the remaining spectrum resources and improve the spectral efficiency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1831-1836
• /
• 2016

Phase noise spectrum distributions of signal generators for next-generation VSAT satellite system based on DVB-RCS2 were analyzed in this paper. The forward link of VSAT system utilizes the APSK higher-order modulation methods based on the DVB-S2 ACM, the modulation methods of the return link utilizes the higher-order PSK and QAM based on the DVB-RCS2. In digital satellite system using the higher-order modulation techniques, the phase noise have an effect on transmission performance, the transmission performance is dominantly degraded by the phase noise of signal generators in the transmission system. The phase noise spectrum distribution of signal generators are analyzed by considering the ACM conditions that adopts the modulation techniques and data rates due to satellite transmission environment. The proper phase noise spectrum distribution for next-generation VSAT system based on DVB-RCS2 are proposed from the analyzed phase noise spectrum characteristics.

• Journal of the Optical Society of Korea
• /
• v.12 no.4
• /
• pp.337-345
• /
• 2008

This article presents the RSOA-based re-modulation schemes for practical application to the WDM-PON link. Emphasis is put on the three methods for reducing the residual downstream signal in the upstream transmission; the simplest one is to use the RSOA gain-saturation property, the second uses selective filtering of the adiabatic-chirped DFB-LD output spectrum, and the last uses a dynamic RSOA gain control by varying its driving current according to the incident binary signal. The reflection sensitivity in the proposed re-modulation link is also qualitatively presented in the cases of using two different types of seed light: coherent light from DFB-LD array and spectrum-sliced incoherent ASE light. We show experimental results of an error-free bidirectional gigabit transmission over 20 km at -30 dB reflection with the spectrum-sliced ASE seed light.

• Journal of Communications and Networks
• /
• v.8 no.2
• /
• pp.158-162
• /
• 2006

Historically, spectrum use has been increased through use of high frequencies, improved modulation, and between antenna techniques. However, these approaches are reaching practical limits. Cognitive radio allows new approaches to improve the intensity of use in spectrum which is licensed but under utilized. This paper addresses two such possible approaches. Real time spectrum markets permit users to exchange spectrum use. Interruptible spectrum would allow public sector spectrum users to recoup economic benefits for allowing others to share their low average, high peak use spectrum subject to preemption.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.63-66
• /
• 2006

This paper proposes an ultrasonic location system based on the spread spectrum principle. Compared with the existing ultrasonic location systems, the proposed system combines the spread spectrum and amplitude modulation principles. As a result, the proposed ultrasonic location system is advantageous in that it can improve positioning accuracy and detection sensitivity by the spread spectrum principle, it simplifies transmitter and receiver circuits by the amplitude modulation, and it is easy to upgrade its performance by the software functionalities. The advantages and performance of the proposed location system are demonstrated by experiments.

• Journal of IKEEE
• /
• v.15 no.1
• /
• pp.23-28
• /
• 2011

This paper describes design and implementation of a spread spectrum clock generator(SSCG). The proposed architecture generates the spread spectrum clock controlling a input voltage signal for VCDL(Voltage Controlled Delay Line). Spread charge pump is controlled by the SSC modulation logic block provides a control signal to VCDL through LPF in DLL. By using this architecture, chip area and power consumption can be reduced because it is not necessary additional circuit to control modulation rate. This circuit has been designed and fabricated using the UMC 0.25um CMOS technology. The chip occupies an area of 290${\times}$120um^2.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.6
• /
• pp.2128-2147
• /
• 2021

Cognitive radio systems are being implemented recently to tackle spectrum underutilization problems and aid efficient data traffic. Spectrum sensing is the crucial step in cognitive applications in which cognitive user detects the presence of primary user (PU) in a particular channel thereby switching to another channel for continuous transmission. In cognitive radio systems, the capacity to precisely identify the primary user's signal is essential to secondary user so as to use idle licensed spectrum. Based on the inherent capability, a new spectrum sensing technique is proposed in this paper to identify all types of primary user signals in a cognitive radio condition. Hence, a spectrum sensing algorithm using improved convolutional neural network and long short-term memory (CNN-LSTM) is presented. The principle used in our approach is simulated annealing that discovers reasonable number of neurons for each layer of a completely associated deep neural network to tackle the streamlining issue. The probability of detection is considered as the determining parameter to find the efficiency of the proposed algorithm. Experiments are carried under different signal to noise ratio to indicate better performance of the proposed algorithm. The PU signal will have an associated modulation format and hence identifying the presence of a modulation format itself establishes the presence of PU signal.