• Korean Chemical Engineering Research
• /
• 제50권1호
• /
• pp.6-10
• /
• 2012

본 연구의 목적은 styrene-butadiene-styrene(SBS) 블록공중합체와 폐타이어 고무분말(crumb rubber, CR)로 개질한 아스팔트의 저온접착특성에 대해 파라핀오일 가소제의 영향에 대한 것이다. SBS/CR로 개질한 아스팔트 블렌드와 파라핀오일/SBS/CR 아스팔트 블렌드의 온도 민감성을 침입도와 연화점으로 측정하였다. 형광현미경으로 파라핀오일/SBS/CR 아스팔트 블렌드에 대한 개질제들의 분산 상태와 만능시험기로 저온에서 접착성질을 각각 측정하였다. 저온접착시험에서 SBS 함량의 증가와 파라핀오일 함량 5 wt % 및 10 wt %에서 접착강도와 변형률이 증가하였다. $-20^{\circ}C$에서 측정한 접착강도와 강인성은 파라핀오일이 10 wt %와 SBS 공중합체의 양이 6 wt %인 조성에서 최대값을 얻었다. SBS/CR/아스팔트 블렌드에서 파라핀오일의 첨가는 유연성을 부여하는 효과를 나타내고, 저온에서 강인성의 증가를 가져오는 것을 확인하였다.

• 한국방재학회 논문집
• /
• 제3권2호
• /
• pp.89-97
• /
• 2003

폐타이어 재활용 아스팔트 콘크리트의 기술개발과 기초 자료의 확립을 위해서 건식공법 및 습식공법으로 생산되어진 폐타이어 재활용 아스팔트 콘크리트와 재래식 밀입도 아스팔트 콘크리트 공시체를 제작하여 아스팔트 혼합물의 내구성을 평가할 수 있는 간접인장강도시험과 회복 탄성계수시험을 수행하였다. 간접인장강도시험 결과 골재 입도의 영향으로 간접인장강도는 재래식 아스팔트 콘크리트가 폐타이어 재활용 아스팔트 콘크리트보다 우수하게 나타났지만, 인성과 최대수직변형률의 경우 골재 입도의 영향에도 불구하고 폐타이어 재활용 아스팔트 콘크리트가 우수하게 나타났다. 또한, 회복 탄성계수시험 결과에서도 폐타이어 재활용 아스팔트 콘크리트가 재래식 아스팔트 콘크리트보다 우수한 성능을 보여줌으로써 폐타이어 재활용 아스팔트 콘크리트의 공학적 특성이 우수하게 나타났다. 특히, 습식공법 활용 폐타이어 재활용 아스팔트 콘크리트의 모든 공용특성은 건식공법활용 혼합물보다 우수한 것으로 평가되었다.

• 한국도로학회논문집
• /
• 제18권2호
• /
• pp.61-71
• /
• 2016

PURPOSES: The objective of this study was to determine the optimum ratio of mix design, for a reclaimed asphalt pavement (RAP) content of 100%, for spray injection application. METHODS: A literature review revealed that spray injection is an efficient and cost-effective application for fixing small defective regions of an asphalt pavement. Rapid-setting polymer-modified asphalt mixtures prepared from two types of rapid-setting polymer asphalt emulsion were subjected to Marshall stability and wet track abrasion tests, in order to identify the optimum mix designs. RESULTS and CONCLUSIONS : Different mix designs of type A and type B emulsions were prepared using RAP and virgin aggregates, in order to compare the performance and determine the optimum mix design. The performance of mixtures prepared with RAP was superior to that of mixtures containing virgin aggregates. Moreover, for optimum ratio of the design, the binder content prepared from RAP was set to 1~2% lower than that consisting of virgin aggregates. Compared to their Type A counterparts, type B mixtures consisting of a reactive emulsion performed better in the Marshall stability and wet track abrasion tests. The initial results confirmed the advantages associated with using RAP for spray injection applications. Further studies will be performed to verify the difference in the optimum mix design and performance obtained in the lab-scale test and tests conducted at the job site by using the spray injection machine.

• 한국도로학회논문집
• /
• 제8권3호
• /
• pp.163-172
• /
• 2006

본 연구에서는 원유 정제과정에서 발생되는 산업부산물인 황을 주성분으로 폴리머 성분의 첨가제를 혼합하여 개발된 개질 첨가제인 SPC(Sulfur Polymer Cement;가칭)를 비율별 (0%, 10%, 30%, 50%)로 첨가하여 개질 아스팔트 바인더 및 혼합물의 실내 물성 평가를 수행하였다. 개질 아스팔트 바인더의 특성을 평가하기 위해 수퍼페이브 바인더 시험법을 이용하여 아스팔트 바인더의 PG(Performance Grade) 등급을 분류하고 온도에 따른 특성을 파악하였다. 또한 개질 아스팔트 혼합물의 피로균열 및 저온균열 특성을 평가하기 위해 $10^{\circ}C$ 및 $-10^{\circ}C$에서 간접인장실험(Indirect Tensile Test)을 수행하였으며, 소성변형에 대한 저항성을 평가하기 위해 휠트랙킹 실험을 수행하였다. 실험 결과, 개질 첨가제인 SPC의 첨가 비율이 증가할수록 소성 변형에 대한 저항성이 증가하는 것으로 나타났으며, 저온 균열 저항성을 증가시킬 수 있는 잠재성을 보여주었다. 그러나 피로균열 SPC는 피로균열 저항성 향상에는 큰 효과가 없는 것으로 나타났다.

• 한국도로학회논문집
• /
• 제18권1호
• /
• pp.57-62
• /
• 2016

PURPOSES : Reflection cracking has been one of the major causes of distress when asphalt pavement is laid on top of concrete pavement. This study evaluated the reflection cracking resistance of asphalt mixtures reinforced with asphalt embedded glass fiber and carbon fiber using a Texas Transportation Institute (TTI) overlay tester. METHODS : Different asphalt mixtures such as polymer-modified mastic asphalt (PSMA) and a dense graded asphalt mixture were reinforced with asphalt-embedded carbon fiber and glass fiber. For comparison purposes, two PSMA asphalt mixtures and one dense graded asphalt mixture were evaluated without fiber reinforcement. Two different overlay test modes, the repeated overlay test (R-OT) and monotonic overlay test (M-OT), were used to evaluate the reflection cracking resistance of asphalt mixtures at $0^{\circ}C$. In the R-OT test, the number of repeated load when the specimen failed was obtained. In the M-OT test, the tensile strength at the peak load and tensile strain were obtained. RESULTS : As expected, the fiber-reinforced asphalt mixture showed a higher reflection cracking resistance than the conventional nonreinforced asphalt mixtures based on the R-OT test and M-OT test. The dense graded asphalt mixture showed the least reflection cracking resistance and less resistance than the PSMA. CONCLUSIONS : The TTI overlay tester could be used to differentiate the reflection cracking resistance values of asphalt mixtures. Based on the R-OT and M-OT results, the carbon-fiber-reinforced asphalt mixture showed the highest reflection cracking resistance among the nonreinforced asphalt mixtures and glass-fiber-reinforced asphalt mixture.

• Advances in concrete construction
• /
• 제10권6호
• /
• pp.515-526
• /
• 2020

Cold-mixed asphalt mixture is a widely recommended asphalt pavement materials with potentially economic and environmental benefits. Due to the reduction of natural non-renewable mineral resources, powder minerals with similar properties are considered as new mineral fillers in asphalt mixtures. This study explored the feasibility of using cement to replace natural limestone powder (LP) in emulsified asphalt concrete modified by styrene-butadiene styrene copolymer. The experimental tests, including compressive strength, Marshall stability as well as moisture susceptibility test, were used to investigate the mechanical properties, the Marshall stability, flow value, as well as the moisture damage. In addition, the influence of material composition on the performance of asphalt concrete is explained by the microstructure evolution of the pore structure, the interface transition zone (ITZ), and the micromorphology. Due to mineralogical reactivity of cement, its replacement part of LP improved the mechanical properties, Marshall stability, but it will reduce the moisture susceptibility and flow value. This is because with the increase of the cement substitution rate, the pore structure of the asphalt concrete is refined, the width of ITZ becomes smaller, and the microstructure is more compact. In addition, asphalt concrete with a larger nominal particle size (AC-16) has relatively better performance.

• 한국도로학회논문집
• /
• 제15권4호
• /
• pp.43-51
• /
• 2013

PURPOSES : The main purposes of this study are to examine the influences of polyethylene wax-based WMA additive on the optimum asphalt content of warm-recycled asphalt mixture based on the Marshall mix design and to evaluate performance of warm-recycled asphalt mixture containing 30% RAP with polyethylene wax-based WMA additive. METHODS: Physical and rheological properties of the residual asphalt were evaluated in terms of penetration, softening point, ductility and performance grade (PG) in order to examine the effects of polyethylene wax-based WMA additive on the residual asphalt. Also, To evaluate performance characteristics of the warm-recycled asphalt mixtures using polyethylene wax-based WMA additive along with a control hot-recycled asphalt mixture, indirect tensile strength test, modified Lottman test, dynamic immersion test, wheel tracking test and dynamic modulus test were conduced in the laboratory. RESULTS : Based on the limited laboratory test results, polyethylene wax-based WMA additive is effective to decrease mixing and compacting temperatures without compromising the volumetric characteristics of warm-recycled asphalt mixtures compared to hot-recycled asphalt mixture. Also, it doesn't affect the optimum asphalt content on recycled-asphalt mixture. All performance test results show that the performance of warm-recycled asphalt mixture using polyethylene wax-based WMA additive is similar to that of a control hot-recycled asphalt mixture. CONCLUSIONS: Overall, the performance of warm-recycled asphalt mixture using polyethylene wax-based WMA additive is comparable to hot-recycled asphalt mixture.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.313-318
• /
• 1999

This study is basic research to improve quality of asphalt concrete mixture, to preserve environment, and to recycle waste vinly. The mixing method and proper content of waste vinyl were determined through preliminary mix design. This study performed mix designs using 2 type gradations of aggregate in addtion content of wate vinly. Marshall stability at optimum asphalt content of asphalt concrete mixture addtin wate vinly was satisfied with the specification of the Ministry of Construction and Transportation , and its values indicated that dense grade asphalt concrete mixture containing waste vinyl were higher than common dense grade mixture (control). From this study, it was confirmed that addtion of waste vinyl improved quality of asphalt concrete mixture.

• 한국도로학회논문집
• /
• 제15권1호
• /
• pp.87-94
• /
• 2013

PURPOSES: To characterize the aging effect on asphalt binder, dynamic shear modulus mastercurve of two typical asphalt binders are developed. METHODS: To develop dynamic shear modulus mastercurve, dynamic shear modulus at high temperature and creep stiffness at low temperature are measured by temperature sweep test and bending beam rheometer test, respectively. RESULTS: It is observed that the aging effect on asphalt binder can be clearly observed from dynamic shear modulus mastercurve and the mastercurve can be utilized to predict behavior of asphalt binder at wide range of temperature. CONCLUSIONS: It is confirmed that SBS 5% modified binder has more desirable mechanical property at low and high temperature as a pavement material comparing to PG64-22 binder and the mastercurve is an effective tool to evaluate the property of asphalt binder.

• 자원리싸이클링
• /
• 제9권3호
• /
• pp.37-45
• /
• 2000

본 논문은 가열 페타이어 재활용 아스팔트 혼합물의 습윤과 동결융해 저항성에 대한 시험결과를 나타내고 있다. 재래식 아스팔트 혼합물과 페타이어 재활용 아스팔트의 기계적 특성을 비교하기 위하여 각기 다른 습윤 조건과 동결 융해 횟수하에서 시험이 수행되었다. 또한, 두 혼합물에 대한 최적 아스팔트 함량을 결정하기 위하여 마샬배합설계가 우선 수행되었다. 본 연구에서 수행된 시험결과에 의하면 페타이어 재활용 아스팔트 혼합물의 습윤과 동결-융해 저항성이 재래식 아스팔트 혼합물보다 우수함을 나타내었다. 따라서 향후 도로포장 재료로의 페타이어 재활용은 습윤과 동결융해로 인한 피해를 최소화할 수 있을 것으로 기대된다.