• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.595-605
• /
• 2018

In recent years, researches on organic-inorganic coating films have conducted a nanocomposite system composed of organic resin matrices having excellent flexibility and chemical stability and inorganic materials having excellent mechanical properties. The o-phenylphenoxyethyl acrylate (OPPEA) used as the acrylate monomer has a high refractive index of 1.58, and the bisphenol A ethoxylate diacrylate (BAEDA) has a low refractive index but improves the chemical stability of the organic resin. In addition, zirconia used as an inorganic material exhibits excellent durability and optical properties. In this study, the BAEDA contents in acrylate monomer were controlled to produce a film with suitable optical transparency. And optimum conditions were established by comparing the changes in surface properties of PET films detected with pencil hardness tester, Abbe's refractometer, and UV-vis spectrophotometer. The hydrophobicity and the dispersibility of zirconia in acrylate monomer were much improved after modification with ${\gamma}$-methacryloxypropyltrimethoxysilane (MPS), which is a silane coupling agent. And the existence of ester C=O bond peak at $1716cm^{-1}$ introduced by MPS through FT-IR ATR spectrophotometer confirmed the completion of surface modification of zirconia with MPS. In addition, the presence of silicon atom on the surface modified zirconia was also proved using X-ray fluorescence spectrometer. When the photocurable hybrid coating was prepared by introducing chemically modified zirconia into acrylate monomer, the refractive index of this coated PET film was improved by 1.2%, compared to the only acrylate coated PET film. The homogeneous distribution of zirconia in acrylate coating layer on PET film was also identified through SEM/EDS mapping analysis technique.

• Korean Journal of Materials Research
• /
• v.26 no.4
• /
• pp.173-181
• /
• 2016

In order to use coal tar pitch (CTP) as a raw material for carbon fibers, it should have suitable properties such as a narrow range of softening point, suitable viscosity and uniform optical properties. In this study, raw CTP was modified by heat treatment with three types of polymer additives (PS, PET, and PVC) to make a spinnable pitch for carbon fibers. The yield, softening point, C/H ratio, insoluble yield, and meso-phase content of various modified CTPs with polymer additives were analyzed by changing the type of polymer additive and the heat treatment temperature. The purpose of this study was to compare the properties of CTPs modified by polymer addition with those of a commercial CTP. After the pitch spinning, the obtained green fibers were stabilized and carbonized. The properties of the respective fibers were analyzed to compare their uniformity, diameter change, and mechanical properties. Among three polymer additives, PS220 and PET261 pitches were found to be spinnable, but the carbon fibers from PET261 showed mechanical properties comparable with those of a commercial CTP produced by an air-blowing method (OCI284). The CTPs modified with polymer additive had higher ${\beta}$-resin fractions than the CTP with only thermal treatment indicating a beneficial effect of carbon fiber application.

• Textile Coloration and Finishing
• /
• v.4 no.4
• /
• pp.110-116
• /
• 1992

For the modification of PET surface, Perfluoropropene and Methyl alcohol were LT-plasma polymerized on the PET fabrics as thin films by means of 13.56 MHz radio frequency generator. The surface properties of PET fabrics were modified from hydrophobic to hydrophilic by application of the postplasma reaction of thin films. The evidence of the modification was identified by observation of the presence of hydroxy group in IR spectrum and the evaluation of degree of hydrophilicity was performed by measuring frictional static voltage of PET fabric with cotton fabric. For the case of modification by PFP, the result performed at the condition of 25 W, 70 m torr has shown to be effective, and for MeOH, result performed at the condition of 25 W, 100 m torr effective. The effect of hydrophilic surface modification of MeOH plasma polymer was superior to that of PFP-plasma polymer.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.6 no.2
• /
• pp.165-170
• /
• 2020

Histone Deacetylases (HDACs) are enzymes that have control gene expression regulation and cell state. In additions, inhibitions of HDACs are associated with growth arrest, differentiation, or apoptosis of tumor cell. Thus HDAC inhibition is one of the interesting biological targets. A variety of HDAC inhibitors has been developed by many scientists, and some of chemical structures related with HDAC inhibitors were modified to give radiolabeled HDAC inhibitors for positron emission tomography (PET) study. In this highlight review, the development of radiolabeled HDAC inhibitors for PET study are described.

• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.490-494
• /
• 2011

Nanocomposites of blends of polyethyleneterephthalate (PET) and polyamide66 (Nylon66) containing natural and organically modified montmorillonite clays (PM, $Cloisite^{(R)}$ 25A and 15A) were prepared by melt mixing. DSC results showed that the addition of clay changed the crystallization behavior of PET/Nylon66 nanocomposites. Clay C25A was observed to most significantly change the crystallization temperature than other clays in blends of PET and Nylon66, which may be caused by the difference in interaction with matrix polymers. AFM results also showed that the lowest value of surface roughness was observed for nanocomposites containing C25A indicating the smooth and relatively homogenous surface. Mechanical properties measurement showed the similar results. Contact angle was measured to study the difference in hydrophobicity. An increase in contact angle was observed for nanocomposites with C25A or C15A due to the increased hydrophobicity.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.541-546
• /
• 2011

In this study, conjugate fibers were prepared from 1,4-cyclohexanedimethanol-modified polyethylene terephthalate (PET) resin using side by side conjugate spinning, sea-island type conjugate spinning, and split type conjugate spinning methods, and the properties of the conjugate fibers were investigated via several techniques. When viscosity increased, the tenacity of side by side conjugate fibers was increased, whereas elongation decreased. The sea-island conjugate fibers showed lower weight loss and surface color difference (K/S) values relative to that of regular PET fibers at the same conditions. The SEM results indicate that orange type spilt readily produced at a temperature range of 120 - 140$^{\circ}C$.

• Proceedings of the Korean Fiber Society Conference
• /
• 1993.06b
• /
• pp.102-107
• /
• 1993

• Proceedings of the Korean Fiber Society Conference
• /
• 1987.06b
• /
• pp.26-27
• /
• 1987

• Fashion & Textile Research Journal
• /
• v.15 no.2
• /
• pp.302-308
• /
• 2013

This study is a preliminary investigation of the influence of surface characteristics of substrates on detergency of particulate soil. The surface of PET film was modified with NaOH and NaOH+ethylene diamine on different times. The surface morphology of the film was scanned by AFM and surface energies were calculated from measured contact angles between several solutions and film based on the geometric mean and a Lewis acid base method. The surface morphology of PET film treated with NaOH and NaOH+ethylene diamine became more etched, and the surface area, surface roughness and the coefficient of friction of film increased with treatment of NaOH and NaOH+ethylene diamine. The contact angle of film treated with NaOH and NaOH+ethylene diamine decreased in water and surfactant solution; in addition, the surface energy increased was largely attributed to the increased portion on the polar surface energy of film. However, the effect of the diamine addition to the NaOH treatment solution on surface characteristics of PET film was insignificant.

• Macromolecular Research
• /
• v.12 no.1
• /
• pp.134-140
• /
• 2004

Semi-crystalline poly(ethylene terephthalate) (PET) film surfaces were modified with argon and oxygen plasmas by radio-frequency (RF) glow discharge at 240 mTorr/40 W; the changes in topography and surface structure were investigated by atomic force microscopy (AFM) in conjunction with specular reflectance of infrared microspectroscopy (IMS). Under our operating conditions, analysis of the AFM images revealed that longer plasma treatment results in significant ablation on the film surface with increasing roughness, regardless of the kind of plasma used. The basic topographies, however, were different depending upon the kind of gas used. The specular reflectance analysis showed that the ablative mechanisms of the argon and oxygen plasma treatments are entirely different with one another. For the Ar-plasma-treated PET surface, no observable difference in the chemical structure was observed before and after plasma treatment. On the other hand, the oxygen-plasma-treated PET surface displays a significant decrease in the number of aliphatic C-H groups. We conclude that a constant removal of material from the PET surface occurs when using the Ar-plasma, whereas preferential etching of aliphatic C-H groups, with respect to, e.g. , carbonyl and ether groups, occurs upon oxygen plasma.