• The KSFM Journal of Fluid Machinery
• /
• v.6 no.4 s.21
• /
• pp.14-20
• /
• 2003

In this study an analysis of the flow characteristics in three types of turbo-fans for a vacuum cleaner was performed by using CFD. The characteristics of three models calculated for various rotating speed for flow rates are obtained and compared with measured data. The mixing plane approach is applied to compute the flow between impeller and diffuser. The results show that the model that is modified to reduce fan noise gives stable flow characteristics in operating range than the original model, with both models show similar performance characteristics at the range of high flow rate. Since in the modified model it takes much longer for an impeller blade to pass a diffuser blade than in the original model, and the peak pressure at BPF can be relieved, it is anticipated that the modified model give much lower noise level with similar performance than the original one, which remains to be verified by unsteady computation and measurements. The good agreement between the predictions and measurement results confirms the validity of this study.

• International Journal of Concrete Structures and Materials
• /
• v.18 no.3E
• /
• pp.213-219
• /
• 2006

Modified singular fracture process zone(S-FPZ) model is proposed in this paper to determine a fracture criterion for continuous crack propagation in concrete. The investigated fracture properties of the proposed fracture model are strain energy release rate at a micro-crack tip and the relationship between crack closure stress(CCS) and crack opening displacement(COD) in the FPZ. The proposed model can simulate the actual fracture energy of experimental results fairly well. The results of the experimental data analysis show that specimen geometry and loading condition did not affect the CCS-COD relation. However, the strain energy release rate is a function of not only specimen geometry but also crack extension. The strain energy release rate remained constantly at the minimum value up to the crack extension of 25 mm, and then it increased linearly to the maximum value. The maximum fracture criterion occurred at the peak load for specimens of large size. The fracture criterion remained at the maximum value after the peak load. The variation of the fracture criterion is caused by micro-cracking and micro-crack localization. The fracture criterion of strain energy release rate can simply be the size effect of concrete fracture, and it can be used to quantify the micro-cracking and micro-crack localizing behavior of concrete.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.1
• /
• pp.127-134
• /
• 1996

In general, seismic isolators which are made of laminated rubber and shim plate have characteristics of complex hysteretic behavior. When shear deformation of the seismic isolator is small, the isolator hassimple hysteretic almost bi-linear behabior. But on large shear deformation hardening effects may occur. This paper proposes a moldeling method of the seimic isolator with modified hysteretic bi-linear model which can consider the hardening effects. From the results of the seismic analyses of the isolated system it is shown that the responses are singificantly reduced compared with those of the non-isolated system. The modified hysteretic bi-linear model of the isolator gives larger ZPA(zero period acceleration) than those of the simple hysteretic bi-linear model and the equivalunt spring-damper model.

• Communications for Statistical Applications and Methods
• /
• v.9 no.1
• /
• pp.175-185
• /
• 2002

A method is proposed for efficiently estimating the mean of a population which has a linear trend. The proposed estimator is based on the centered modified systematic sampling method and the concept of interpolation. Using the expected mean square error criterion, it is shown that the proposed method is more efficient than conventional methods in most real cases.

• 한국데이터정보과학회:학술대회논문집
• /
• 2001.10a
• /
• pp.17-24
• /
• 2001

A method is proposed for efficiently estimating the mean of a population which has a linear trend. The proposed estimator is based on the centered modified systematic sampling method and the concept or interpolation. Using the expected mean square error criterion, it is shown that the proposed method is more efficient than conventional methods in most real cases.

• Korean Journal of Clinical Pharmacy
• /
• v.23 no.3
• /
• pp.278-283
• /
• 2013

Background: Problem-based learning (PBL) has introduced as an important part of pharmacy education in Korea as it is effective method to help students gain and apply knowledge with development of problem-solving, critical-thinking, and decision-making skills. In order to provide the effective PBL, a number of trained facilitators and suitable PBL rooms are required. However, these become a barrier in Korea as most pharmacy schools have one or two faculty members who majored in clinical pharmacy. Objective: This study was performed to implement and evaluate a modified PBL in gastrointestinal (GI) pharmacotherapy class facilitated by one instructor. Methods: A general information of traditional PBL for 6 hours through 3 days is introduced before initiating GI pharmacotherapy class. After 3 hour-GI pharmacotherapy classes for 6 weeks, modified PBL was implemented with one instructor to facilitate PBL for four small groups with 19 pharmacy students simultaneously. Modified PBL was incorporated with weekly mini-case discussion and presentation. Results: Students completed 15-question survey to evaluate modified PBL course, student performance, group performance, and facilitator performance. Eighty-four percent of students answered modified PBL was helpful to understand what they have learned. Mean score in group performance was higher than that of individual performance during modified PBL course. Overall, students reported modified PBL was useful in knowledge building. Conclusion: Modified PBL model without individual group facilitators in one classroom helped students to achieve self-directed, independent learning skills in an interactive and engaging environment.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.2
• /
• pp.167-173
• /
• 2016

This paper proposes ductile failure simulation under high strain rate conditions using finite element (FE) analyses. In order to simulate a cracked component under a high strain rate condition, this paper applies the stress-modified fracture strain model combined with the Johnson/Cook model. The stress-modified fracture strain model determines the incremental damage in terms of stress triaxiality (${\sigma}_m/{\sigma}_e$) and fracture strain (${\varepsilon}_f$) for a dimple fracture using the tensile test results. To validate the stress-modified fracture strain model under dynamic loading conditions, the parameters are calibrated using the tensile test results under various strain rates and the fracture toughness test results under quasi-static conditions. The calibrated damage model predicts the CT test results under a high strain rate. The simulated results were then compared with the experimental data.

• Journal of Korean Clinical Nursing Research
• /
• v.16 no.1
• /
• pp.167-175
• /
• 2010

Purpose: This study investigated nursing care delivery systems in 44 university affiliated hospitals and satisfactions with the systems perceived by 226 unit managers (head nurses) of general medical surgical wards. Methods: Data were collected with questionnaires consisting of checklists asking the unit managers their nursing care delivery systems and their satisfactions with the systems. Results: Four models of nursing care delivery systems (primary, modified primary, team, and functional models) were drawn from the participants' responses. Among the four key models 35% of the units adopted team model whereas 24.3% adopted primary model and 22.6% adopted modified primary model. In spite of 35% of team model being under use, 60.6% (n=137) of the unit managers answered the nursing delivery system of their units as team model and only 6.2% (n=14) answered their units having primary or modified primary models, instead of 46.9% combining both. In regard to the satisfaction, critical thinking ability of staff nurses (members in their units) was the most dissatisfactory area regardless of models of service delivery. Conclusion: Introducing team model supplemented with core concepts of primary model (primary team delivery model) into nursing practice will reform the workplace and therefore deliver safe health care services to patients.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.47 no.3
• /
• pp.3-13
• /
• 2005

The conceptual rainfall-runoff models are used to predict complex hydrological effects of a basin. However, to obtain reliable results, there are some difficulties and problems in choosing optimum model, calibrating, and verifying the chosen model suitable for hydrological characteristics of the basin. In this study, Genetic Algorithm and SCE-UA method as global optimization methods were applied to compare the each optimization technique and to analyze the application for the rainfall-runoff models. Modified TANK model that is used to calculate outflow for watershed management and reservoir operation etc. was optimized as a long term rainfall-runoff model. And storage-function model that is used to predict real-time flood using historical data was optimized as a short term rainfall-runoff model. The optimized models were applied to simulate runoff on Pyeongchang-river watershed and Bocheong-stream watershed in 2001 and 2002. In the historical data study, the Genetic Algorithm and the SCE-UA method showed consistently good results considering statistical values compared with observed data.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.6
• /
• pp.89-96
• /
• 2007

Finite failure NHPP models presented in the literature exhibit either constant. monotonic increasing or monotonic decreasing failure occurrence rates per fault. Accurate predictions of software release times. and estimation of the reliability and availability of a software product require quality of a critical element of the software testing process : test coverage. This model called Enhanced non-homogeneous Poission process(ENHPP). In this paper, exponential coverage and S-type model was reviewed, proposes modified(the superosition and mixture) model, which make out efficiency application for software reliability. Algorithm to estimate the parameters used to maximum likelihood estimator and bisection method. model selection based on SSE statistics for the sake of efficient model, was employed.