• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.82-87
• /
• 2002

RFM is the sensor model of IKONOS imagery for end-users. IKONOS imagery vendors provide RPC (Rational Polynomial Coefficients), Ration Function Model coefficients for IKONOS, for end-users with imagery. So it is possible that end-users obtain geospatial information in their IKONOS imagery without additional any effort. But there are requirements still fur rigorous 3D positions on RPC user. Provided RPC can not satisfy user and company to generate precision 3D terrain model. In IKONOS imagery, physical sensor modeling is difficult because IKONOS vendors do not provide satellite ephemeris data and abstract sensor modeling requires many GCP well distributed in the whole image as well as other satellite imagery. Therefore RPC modification is better choice. If a few GCP are available, RPC can be modified by method which is introduced in this paper. Study on evaluation modified RPC in IKONOS reports reasonable result. Pseudo GCP generated with vendor's RPC and additional GCP make it possible through sequential solution.

• STI Policy Review
• /
• 제4권2호
• /
• pp.136-158
• /
• 2013

This study identifies the structural determinants of the social acceptance of genetically modified (GM) foods across European countries. Toward this end, we suggest an integrated theoretical model to explain the social acceptance of GM foods by including both perception factors (perceived benefit, perceived risk, feelings, trust, and knowledge) and value factors (ethical concerns, science optimism, religiosity, and ideology). This model is then tested by analyzing survey data collected from 18,634 Europeans in 32 countries. The results indicate that first, not only perception factors but also value factors significantly contribute to explaining the acceptance of GM foods. Second, perceived benefits, perceived risk, feelings, and ethical concerns tend to be the four biggest determinants for acceptance. Third, this two-factor model could be generalized even with variation across countries. Finally, ethical concerns and scientific optimism play a moderating role between predictors and outcomes in the acceptance of GM foods.

• 소성∙가공
• /
• 제16권4호
• /
• pp.234-238
• /
• 2007

Magnesium alloy sheets in room temperature have unusual mechanical properties such as high in-plane anisotropy/asymmetry of yield stress and hardening behavior. In this paper, the continuum plasticity models considering the plastic behavior of AZ31B Mg alloy sheet were derived. A new hardening law based on modified two-surface model was developed to consider the general stress-strain response of metals including Bauschinger effect, transient behavior and the unusual asymmetry. Three deformation modes observed during the continuous tension/compression tests were mathematically formulated with simplified relations between the state of deformation and their histories. To include the anisotropy and asymmetry of the initial yield stress, the Drucker-Prager's pressure dependent yield surface was modified by adding anisotropic constants.

• 한국세라믹학회지
• /
• 제37권6호
• /
• pp.589-595
• /
• 2000

Densification behavior of SiC powder was investigated under cold compaction. A special form of the Cap model was proposed from experimental data of SiC powder under triaxial compression. To compare with experimental data of SiC powder under cold compaction, the proposed constitutive model was implemented into a finite element program (ABAQUS). Finite element calculations from the Cam-Clay model and the modified Drucker-Prager model were also compared with experimental data of SiC powder. The agreements between experimental data and finite element results obtained from the proposed constitutive model are reasonably good. In die pressing, finite element results obtained from the Cam-Clay model and the modified Drucker-Prager model, however, show lower average density of SiC powder compacts compared to experimental data.

• 설비공학논문집
• /
• 제18권4호
• /
• pp.344-350
• /
• 2006

The present study investigates the characteristics of fire-driven heat flows and gas concentration in a compartment fire by using the modified VHS model (MVHS). The main idea of this model is to add some source terms for combustion products and oxygen consumption to the original VHS model for providing more accurate and useful information on gas concentration distributions as well as thermal fields. It is found that the present MVHS model shows fairly good agreement with the experimental data and the eddy breakup combustion model. The tilting angle of fire plume calculated by MVHS is larger than that of EBU model because the fire source of VHS is affected by ventilating flow less than EBU. However, this discrepancy is apparently reduced in the downstream region of fire source.

• 대한의생명과학회지
• /
• 제27권4호
• /
• pp.329-333
• /
• 2021

We previously identified that tumor cells genetically modified with a 4-1BBL co-stimulatory molecule had anticancer effects in a CT26 mouse colorectal tumor model. To identify the distinction between immune cells in a mouse tumor model treated with tumor cells genetically modified with 4-1BBL or β-gal, we examined the immune cells in CT26-WT, CT26-βgal, and CT26-4-1BBL tumor bearing mice 21 days after tumor cell administration. The CD8+ T cells population in mice treated with tumor cells genetically modified with 4-1BBL was significantly increased on day 21 compared to that of tumor cells genetically modified with β-gal in the spleen and tumor tissue. The CD4+ T cell population was not different between the two mice groups. The Foxp3+CD25^high CD4 T cell population decreased on day 21 in tumor tissues, but the decrease was not significant. We also found that CD8 T cells had pivotal roles in inhibiting tumor growth by treating mice with ant-CD4 and CD8 antibodies. These results suggest that tumor cells genetically modified with 4-1BBL could inhibit tumor growth by affecting on CD8 T lymphocytes.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.37-42
• /
• 2001

This paper computes the bluff-body stabilized jet and flame. This study numerically investigates the nonpremixed $C_{2}H_{4}-air$ jet for the nonreacting case and the nonpremixed $CH_{3}OH-air$ turbulent flames for the reacting case using the laminar flamelet model on modified KIVA2 code. And this study predicts $NO_{x}$ formation characteristics using Eulerian Particle Flamelet Model. In the present study, the turbulent combustion model is applied to analyze both nonreacting and reacting case. And both standard $k-{\varepsilon}$ model and modified $k-{\varepsilon}$ model are used in nonreacting case. Calculations are compared with experimental data in terms of velocity, mixture fraction, mixture fraction Root Mean Square and Temperature. The present model correctly predicts the essential features of flame structures and $NO_{x}$ formation characteristics in the bluff-body stabilized flames.

• 설비공학논문집
• /
• 제22권1호
• /
• pp.1-12
• /
• 2010

An analysis model considered the manufacturing factors and the pellet size has been developed in order to predict the performance characteristics of thermoelectric modules as generators. Since the electrical internal resistance has a significant role in the performance of thermoelectric modules, the variations of electrical internal resistance with operating temperature are experimentally measured. The modified electrical internal resistance calculated from an experimental correlation is applied to the analysis model. To verify the modified analysis model, the output voltage, output current and output power are compared with experimental results for the operating temperature conditions of $T_h=85^{\circ}C$ and ${\Delta}T=40^{\circ}C$. The modified analysis shows a good agreement with the experimental results in terms of the output voltage, current, and power.

• 대한기계학회논문집B
• /
• 제37권10호
• /
• pp.887-894
• /
• 2013

복합재의 물성치 해석에 일반적으로 사용되는 일반화된 자기일치모델(Generalized Self-Consistent Model)과 수정된 에쉘비모델(Modified Eshelby Model)을 이용하여 나노유체의 열전도계수를 예측할 수 있음을 보였다. 이 유체의 열전달효과를 대폭 향상시키는 대표적인 메카니즘 중 하나인 나노입자와 기본유체 사이에 존재하는 나노층의 영향을 고려하여 나노유체의 열전도계수를 예측하였다. 본 연구는 나노층의 열전도계수가 일정한 값을 가질 때 기존 대표적인 모델과 동일한 결과를 보였으며, 선형적으로 변할 때 역시 문헌에 있는 모델과 동등한 수준의 예측 값을 보였다. 알루미나와 산화구리를 나노입자로 물과 에틸렌글리콜을 기본유체로 한 나노유체의 열전도계수에 대한 실험결과와 본 모델의 예측결과를 비교함으로써 본 모델의 타당성을 입증하였다.

• 한국농공학회논문집
• /
• 제56권5호
• /
• pp.1-9
• /
• 2014

The DIROM (Daily Irrigation Reservoir Operation Model) was modified to estimate amounts of water release from reservoirs, considering customary irrigation water management practices, such as water supply for puddling and transplanting paddy rice from seeding beds and mid-season drainage. The applicability of the modified model was investigated by simulating amounts of water release from three study reservoirs: Hwamae, Ogi, and Doya Reservoirs. In terms of annual amounts of water release, the relative errors between the observed and simulated values in 2012 and 2013 ranged -26.20 % to 10.28 % and 4.90 % to 30.06 %, respectively; in case of reservoir water levels, the RMSE values ranged 0.45 m to 1.34 m and 0.40 m to 1.27 m, respectively. Also, it was revealed that the model provided better simulation results for monthly water releases than the original model. In addition, the model presented better performance in simulating 10-day amounts of water release from April to June. However, the model had still significant errors in the simulation results from July to September because the reservoirs were practically operated to adapt to water management circumstances. Finally, it is concluded that the modified DIROM can estimate the amounts of water release from reservoirs, reflecting irrigation water management customs in paddy-field districts. To achieve higher prediction accuracy of the model, it is necessary to incorporate practical reservoir operation rules into the model.