• Korean Journal of Metals and Materials
• /
• v.49 no.9
• /
• pp.692-698
• /
• 2011

The thermo-chemical treatment (TCT) process was applied to achieve surface hardening of CP titanium. The following three different surface modification conditions were tested so that the best surface hardening process could be selected:(a) PVD, (b) TCT+PVD, and (c) TCT+Aging+PVD. These specimens were tested and analyzed in terms of surface roughness, wear, friction coefficient, and the gradient of hardening from the surface of the matrix. The three test conditions were all beneficial to improve the surface hardness of CP titanium. Moreover, the TCT treated specimens, that is, (b) and (c), showed significantly improved surface hardness and low friction coefficients through the thickness up to $100{\mu}m$. This is due to the functionally gradient hardened surface improvement by the diffused interstitial elements. The hardened surface also showed improvement in bonding between the PVD and TCT surface, and this leads to improvement in wear resistance. However, TCT after aging treatment did not show much improvement in surface properties compared to TCT only. For the best surface hardening on CP titanium, TCT+PVD has advantages in surface durability and economics.

• Tribology and Lubricants
• /
• v.34 no.6
• /
• pp.217-225
• /
• 2018

In this study, we spray a Ni-Cr composite powder onto AISI 4340 steel using the high velocity oxygen fuel method. We subsequently subject the Ni-Cr coating (as-sprayed) to ultrasonic nanocrystal surface modification (UNSM) process to improve the tribological performance. This study aims at increasing the wear resistance and durability of the Ni-Cr coating by altering the surface integrity and microstructure via the UNSM process. The UNSM process reduces the surface roughness of the as-sprayed coating by about 64%, which is explained by observing the elimination of high peaks and valleys and filling up micro-pores. Furthermore, a change in the microstructure of the coating due to continuous high-frequency strikes to the surface by a tip can lead to an increase in hardness from about 48 to 60 HRC. Furthermore, we investigate the characterization of the friction and wear behavior of Ni-Cr coating by a ball-on-disc tribometer in the dry conditions. We determine that after the UNSM process, there is a significant reduction in the friction coefficient of the as-sprayed coating from approximately 1.1 to 0.75. This is owing to the increased hardness and smoothed surface roughness. In addition, we investigate the surface morphology and wear track of the coatings before and after the UNSM process using a scanning electron microscope, energy dispersive spectrometer, and three-dimensional laser scanning microscope. We observe that the wear track of the Ni-Cr coating after the UNSM process is lower than that of the as-sprayed one. Thus, we confirm that the UNSM process has a significant influence on the improvement of the tribological performance of the Ni-Cr composite coating.

• Structural Engineering and Mechanics
• /
• v.84 no.1
• /
• pp.113-127
• /
• 2022

Steel plate shear walls (SPSWs) are commonly utilized to provide lateral stiffness in high-rise structures. The simplified model is frequently used instead of the fine-scale model in the design of buildings with SPSWs. To predict the lateral strength of steel plate shear walls with diagonal stiffeners (DS-SPSWs), a simplified model is presented, namely the cross brace-strip model (CBSM). The bearing capacity and internal forces of columns for DS-SPSWs are calculated. In addition, a modification coefficient is introduced to account for the shear action of the thin plate. The feasibility of the CBSM is validated by comparing the numerical results with theoretical and experimental results. The numerical results from the CBSM and fine-scale model, which represent the bearing capacity of the DS-SPSW with varied stiffened plate dimensions, are in good accord with the theoretical values. The difference in bearing capacity between the CBSM and the fine-scale model is less than 1.35%. The errors of the bearing capacity from the CBSM are less than 5.67% when compared to the test results of the DS-SPSW. Furthermore, the shear and axial forces of CBSM agree with the results of the fine-scale model and theoretical analysis. As a result, the CBSM, which reflects the contribution of diagonal stiffeners to the lateral resistance of the SPSW as well as the effects on the shear and axial forces of the columns, can significantly improve the design accuracy and efficiency of buildings with DS-SPSWs.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.25 no.2
• /
• pp.35-40
• /
• 2021

Purpose Glomerular filtration rate(GFR) is an important indicator for the diagnosis, treatment, and follow-up of kidney disease and is also used by healthy individuals for drug use and evaluating kidney function in donors. The gold standard method of the GFR test is to measure by continuously injecting the inulin which is extrinsic marker, but it takes a long time and the test method is complicated. so, the method of measuring the serum concentration of creatinine is used. Estimated glomerular filtration rate (eGFR) is used instead. However, creatinine is known to be affected by age, gender, muscle mass, etc. eGFR formulas that are currently used include the Cockroft-Gault formula, the modification of diet in renal disease (MDRD) formula, and the chronic kidney disease epidemilogy collaboration (CKD-EPI) formula for adults. For children, the Schwartz formula is used. Measurement of GFR using ⁵¹Cr-EDTA (diethylenetriamine tetraacetic acid), ^99mTc-DTPA (diethylenetriamine pentaacetic acid) can replace inulin and is currently in use. Therefore, We compared the GFR measured using ^99mTc-DTPA with the eGFR using CKD-EPI formula. Materials and Methods For 200 kidney transplant donors who visited Asan medical center.(96 males, 104 females, 47.3 years ± 12.7 years old) GFR was measured using plasma(Two-plasma-sample-method, TPSM) obtained by intravenous administration of ^99mTc-DTPA(0.5mCi, 18.5 MBq). eGFR was derived using CKD-EPI formula based on serum creatinine concentration. Results GFR average measured using ^99mTc-DTPA for 200 kidney transplant donors is 97.27±19.46(ml/min/1.73m²), and the eGFR average value using the CKD-EPI formula is 96.84±17.74(ml/min/1.73m²), The concentration of serum creatinine is 0.84±0.39(mg/dL). Regression formula of ^99mTc-DTPA GFR for serum creatinine-based eGFR was Y = 0.5073X + 48.186, and the correlation coefficient was 0.698 (P<0.01). Difference (%) was 1.52±18.28. Conclusion The correlation coefficient between the ^99mTc-DTPA and the eGFR derived on serum creatinine concentration was confirmed to be moderate. This is estimated that eGFR is affected by external factors such as age, gender, and muscle mass and use of formulas made for kidney disease patients. By using ^99mTc-DTPA, we can provide reliable GFR results, which is used for diagnosis, treatment and observation of kidney disease, and kidney evaluation of kidney transplant patients.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.1707-1714
• /
• 2012

Grb2 is an adapter protein involved in the signal transduction and cell communication. The Grb2 is responsible for initiation of kinase signaling by Ras activation which leads to the modification in transcription. Ligand based pharmacophore approach was applied to built the suitable pharmacophore model for Grb2. The best pharmacophore model was selected based on the statistical values and then validated by Fischer's randomization method and test set. Hypo1 was selected as a best pharmacophore model based on its statistical values like high cost difference (182.22), lowest RMSD (1.273), and total cost (80.68). It contains four chemical features, one hydrogen bond acceptor (HBA), two hydrophobic (HY), and one ring aromatic (RA). Fischer's randomization results also shows that Hypo1 have a 95% significant level. The correlation coefficient of test set was 0.97 which was close to the training set value (0.94). Thus Hypo1 was used for virtual screening to find the potent inhibitors from various chemical databases. The screened compounds were filtered by Lipinski's rule of five, ADMET and subjected to molecular docking studies. Totally, 11 compounds were selected as a best potent leads from docking studies based on the consensus scoring function and critical interactions with the amino acids in Grb2 active site.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.12
• /
• pp.1-6
• /
• 2007

In this study, we have performed the channel modification of the conventional MHEMT (metamorphic high electron mobility transistor) to improve the breakdown characteristics. The Modified channel consists of the InxGal-xAs channel and the InP sub channel instead of the InxGa1-xAs channel. Since InP has the lower impact ionization coefficient in comparison with In0.53Ga0.47As, we have adopted the InP-composite channel in the modified MHEMT. We have investigated the breakdown mechanism and the RF characteristics for the conventional and the InP- composite channel MHEMTs. From the measurement results, we have obtained the enhanced on and off-state breakdown voltages of 2.4 and 5.7 V, respectively. Also, the increased RF characteristics have brought about the decreased output conductance for the InP-composite channel MHEMT. The cut-off frequency (fT) and the maximum oscillation frequency (fmax) for the InP-composite Channel MHEMT were 160 GHz and 230 GHz, respectively. It has been shown that the InP-composite channel MHEMT has the potential applications for the millimeter wave power device.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.6 no.2
• /
• pp.228-239
• /
• 1999

In 1990 Home Care Education Programs started when legislation established certification for Home Care Nurses. The Ministry of Health and Welfare proposed a home care education curriculum which has 352 class hours and 248 hours of 'family nursing and practice'. Though Home Care Education Programs have been offered in 11 home care educational institutes, there has been no formal revision for the home care education programs. Also a first and second home care demonstration projects have been carried out, but there has been no research on outcomes for home care education as applied in home care practice. The purposes of this study were to identify the important content areas for home care nursing as perceived by home care nurses, and to identify their clinical competence in each of these areas, and from these to identify the education needs. The sample was 107 home care nurses who were working in home care demonstration hospitals and community-based institutions which have been offering home care services. Responses were received from 88 nurses, comprising a 82.2% return rate, and 86 were included in the final analysis. The instrument used was a modification of the instrument developed by Caie-Lawrence et(1995) and Moon's(1991) instrument on home care knowledge. The instrument's Cronbach's coefficient was 0.982. Among the respondents, 64% were working at home care demonstration hospitals and 36% were working at community-based institutions. Their home care experiences were from one month to six years, with a mean of 20.6 months. The importance rating for home care education content was 3.42 0.325, which means importance was rated relatively high. Technical aspects of home care were identified the most important. Five items 'education skill', 'counseling skill', 'interview skill', 'wound care skill', 'bed sore care skill' received 100% importance ratings. The competency rating was 2.87 0.367 and 'technical aspects of home care' was the highest, and 'application to home care skill' was the lowest. Home care nurses' education needs were identified and compared to the importance ratings and competency ratings. Eleven items were identified as the highest in the importance areas and eleven items were in the lowest competency areas. High importance ratings matched with low competency ratings determined training needs, but there was no matching items in this study. In the lowest competency areas four items were excluded, because of not being applicable in current home care practice. Therefore total eighteen items were identified as home care education needs. These items are 'bed sore care skill', 'malpractice', 'wound care skill', 'general infection control', 'change and management of tracheostomy tubes', 'CVA patient care', 'Hospice care', 'pain management', 'urinary catheterization and management', 'L-tube insertion and managements', 'Respirator use and management skill', 'infant care', 'prevention to burnout', 'child assessment', 'CAPD', 'infant assessment', 'computer literacy', and 'psychiatry patient care'.

• Journal of Korean Academy of Nursing
• /
• v.26 no.2
• /
• pp.359-371
• /
• 1996

This study has been done for the purpose of testing the effect of health education on the performance of health promoting behavior in college students, and identifying the factors affecting health promoting behaviors. A Nonequivalent control group posttest research design was used. Two hundred thirty college students at K College in T city were studied. Of them, 114 who attended a systematic health education session for three hours a week during one semester were the experimental group. And 116 college students who were chosen of matched sampling of grade, class and sex were the control group. This study was conducted from March 1 to July 2, 1995. The instruments used for this study included a survey of general characteristics, perceived health status, self-esteem, health promoting behavior and health locus of control. Analysis of data was done by use of mean, 1-test, Pearson correlation coefficient and multiple regression. The results of this study are summarized as follows : 1) The average item score for the health promoting behavior was low at 2.52. In the sub-categories, the highest degree of performance was ‘harmonious relationships’, following ‘sanitary life’, ‘self-esteem’, ‘rest and sleep’, and ‘emotional support’ and the lowest degree was ‘professional health management’. 2) Hypothesis 1 that the college students who get health education will have a higher degree of health promoting behavior than the college students who do not get health education was accepted. There was a statistically significant difference between the average of the experimentalgroup, 2.60, and the average of the control group, 2.45.（t＝11.30, p＝0.0009）. 3) Hypothesis 2 that the college students who get health education will have a higher score of perceived health status than college students who do not get the health education was rejected. （t＝1.13, p＝0.289） 4) Performance of health promoting behavior was positively correlated with self-esteem and grade and negatively correlated with perceived health status. 5) The most important factor affecting performance of health promoting behavior was self-esteem. The following suggestions are made based on the above results : 1) Replication of the research is needed to confirm effects of health education. 2) More effective health education programs need to be developed through by modification of teaching methods and content analysis of health education. 3) Other factors affecting health promoting behavior should be identified. 4) Nursing colleges or departments of nursing should make an effort to develop and carry out various health education programs for the health promotion of all college students.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.11
• /
• pp.1737-1741
• /
• 2014

An HPLC method for determination of naringin was developed to standardize it as a marker compound in Goheung yuzu extract as a functional health food. Optimum results were obtained by C-18 column chromatography using solvent mixtures (A: 0.5% acetic acid, B: acetonitrile) as the stationary phase and mobile phase. The method was fully validated and sensitive with a limit of detection (LOD) of 0.0218 mg/L and limit of quantification (LOQ) of 0.0661 mg/L. The method showed high linearity (coefficient of correlation=0.9986) and high accuracy, as recovery rates of naringin at concentrations of 1, 0.5, 0.1, 0.05 mg/mL were in the ranges of 95.74~98.25%, 97.67~101.01%, 97.33~104.64%, and 95.53~106.82%, respectively. Intra-day and inter-day variation, which are measures of method precision, were 1.39~1.95% and 0.17~1.49%, respectively. Therefore, the method could be used without modification for determination of naringin as a marker compound in Goheung yuzu extracts.

• Nuclear Engineering and Technology
• /
• v.26 no.1
• /
• pp.126-139
• /
• 1994

Best-estimate thermal-hydraulic codes, CATHARE2 V1.2 and RELAP5/MOD3, hate been assessed against the BETHSY 6.2 tc six-inch cold leg break loss-of-coolant accident (LOCA) test. Main objective is to analyze the overall capabilities of the two codes on physical phenomena of concern during the small break LOCA i.e. two-phase critical flow, depressurization, core water level de-pression, loop seal clearing, liquid holdup, etc. The calculation results show that the too codes predict well both in the occurrences and trends of major two-phase flow phenomena observed. Especially, the CATHARE2 calculations show better agreements with the experimental data. However, the two codes, in common, show some deviations in the predictions of loop seal clearing, collapsed core water level after the loop seal clearing, and accumulator injection behaviors. The discrepancies found from the comprision with the experimental data are larger in the RELAP5 results than in the CATHARE2. To analyze the deviations of the two code predictions in detail, several sensitivity calculations have been performed. In addition to the change of two-phase discharge coefficients for the break junction, fine nodalization and some corrections of the interphase drag term are made. For CATHARE2, the change of interphase drag force improves the mass distribution in the primary side. And the prediction of SG pressure is improved by the modification of boundary conditions. For RELAP5, any single input change doesn't improve the whole result and it is found that the interphase drag model has still large uncertainties.