• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.34-39
• /
• 1995

Particle displacement distributions of the fundamental mode and overtone modes in an energy-frapped single resonator and an energy-trapped double acoustically coupled filter using the thickness shear vibration were calculated. And the effects of the width of a pair of partial electrodes, the width of the gap between two pairs of partial electrodes and the magnitude of the plate back on the displacement distributions of the symmetric vibration mode and anti-symmetric vibration mode of the resonators and the filters were investigated.

• Structural Engineering and Mechanics
• /
• v.6 no.5
• /
• pp.517-527
• /
• 1998

This paper describes an exact method of analysis for natural vibration of diagonal networks by considering an equivalent cyclic periodic structure and adopting the double U-transformation technique. Both a lumped mass system and a distributed mass system are considered to investigate the diagonal networks. The exact solution for the frequency equations and the natural modes of the networks can be derived. As numerical examples, square diagonal cable networks with different meshes are worked out.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.3
• /
• pp.149-156
• /
• 1992

A method for designing high speed spindle is presented in order to enhance the machining accuracy in consideration of vibration characteristics. Experimetal evaluations of the spindle HS 430 as a prototype are made efficiently with the help of bending vibration modes for nonrotational and rotationalstate comparing with the commercial spindle V430. As a result the spindle of HS 430 shows the superior performance than that of V 430.

• Advances in nano research
• /
• v.6 no.4
• /
• pp.323-337
• /
• 2018

The nonlinear free vibration of a nanorod subjected to finite strain is investigated. The governing equation of motion in material configuration in terms of displacement is determined. By means of Galerkin method, the Fourier series solutions satisfying some typical boundary conditions are determined. The amplitude-frequency relationship and interaction between the modes are studied. The effects of nonlocal elasticity are shown for different length of nanotubes and nonlocal parameter. The results show that nonlocal effects lead to additional internal modal interaction for nanorod vibrations.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.310.1-310
• /
• 2002

Dynamic characteristics of smart laminated composite plates with passive constrained layer damping have been investigated to design structure with maximum possible damping capacity. The equations of motion are derived fur flexural vibrations of symmetrical, multi-layer laminated plates. The damping ratio and modal damping of the first bending and torsional modes are calculated by means of iterative complex eigensolution method. (omitted)

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.03a
• /
• pp.85-90
• /
• 1996

In the word, there is varied types of vibration, and these affect the mechanical industry. In this paper is plates with two parallel sides fixed. Electronic speckle pattern interferometry (ESPI) is one of the optical nondestructive testing technique. By using the ESPI, vibration modes for excitation point, a/b(ratio of longuitudinal and lateral length), and kind of specimen are measured and compared qualitatively with theoritical analysis that Warburton proposed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.267-272
• /
• 2004

Vertical pump are widely used owing to the fact that they occupy small floor space. In this type of pumps, however, the vibrational problems are very important, since, in many cases, they have less stiffness in comparison with later pumps. This study presents a simple solution method for calculating the natural frequencies and modes of vertical pumps. In this study, a model of a vertical pump was developed and the nondimensional parameters for the vibrational characteristics of it were determined. Added mass was calculated for the effects of water and the transfer matrix method was used.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.225-231
• /
• 2000

Nonlinear characteristics of piezoelectric-type micro actuator used for hard disk drives are experimentally analyzed using Hutchinson's Magnum acturator. The nonlinear effects include hysteresis, superharmonic resonance, jump phenomenon, and shifting of natural frequencies. The effects of exciting frequency and input voltage on the nonlinear phenomena are investigated. It is shown that the micro actuator has the typical 3 times superhamonic resonances coupled to both 1st torsional and sway modes of the suspension.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.362.1-362
• /
• 2002

Eigenvalues are taken as performance criteria for structural damping design using viscoelastic material. Given material properties, optimal distribution of damping material is sought based on eigenvalue sensitivity. For eigenanalysis of frequency dependent viscoelastic material rented structures, Golla-Hughes-McTavish(GHM) model is used and some dominant modes are chosen for consideration. (omitted)

• Journal of KSNVE
• /
• v.2 no.3
• /
• pp.173-180
• /
• 1992

A boundary control method that controls interior state by actively controlling the boundary conditions in boundary value problems is proposed for the vibration control of flexible beam by using piezoelectric actuators. The governing equations are derived based on the Euler beam theory and the reduced order model is obtained by modal truncation. The spillover effects caused by the uncontrolled high frequency modes are analyzed and the method selecting a suitable sensor location is also proposed. The lag compensator in digital form is realized by using a microcomputer and its peripheral devices. The efficiency of the proposed control scheme is demonstrated experimentally and compared with the simulation results.