• Steel and Composite Structures
• /
• 제4권3호
• /
• pp.247-263
• /
• 2004

Comparison of behaviour of shear connections by means of shear-connection strips (perfobond and comb-shaped strips) and headed studs under static and repeated loading, possible failure modes of concrete dowels and ways of the quantitative differentiation of some failure modes are described in the paper. The article presents a review of knowledge resulting from the analysis of shear-connection effects based on tests of perfobond and comb-shaped strips carried out in the laboratories of the Faculty of Civil Engineering of the Technical University of Kosice (TU of Kosice) in Slovakia and their comparison with results obtained by other authors.

• 한국지반공학회논문집
• /
• 제19권5호
• /
• pp.175-187
• /
• 2003

일반적으로 사질토 지반의 원형수직구에 설치된 흙막이벽에 작용하는 토압은 삼차원 아칭효과로 인하여 평면변형조건의 옹벽에 작용하는 토압과는 다르며, 원통형 벽체의 설계를 위해서는 벽체에 작용하는 토압의 정확한 산정이 필요하다. 원형수직구에 설치된 벽체 배면지반의 파괴모드는 지중응력상태에 의존하게 되는데, 파괴모드는 실질적으로 원기둥형 활동면을 갖는 경우와 깔대기형 파괴면을 갖는 경우로 구분할 수 있다. 기존의 연구결과에 의하면 각각의 파괴모드에 대하여 원통형 벽체에 작용하는 토압공식이 제안되었으나, 도입된 가정으로 인하여 불합리한 경향을 보이는 문제점이 있다. 본 연구에서는 원통형 벽체에 작용하는 토압을 산정하기 위하여 각각의 파괴모드에 대하여 제안된 토압공식을 살펴보고, 각 토압공식에서 가정된 사항을 수정 제안하였다. 각각의 파괴모드에 대하여 수정 제안된 토압공식들은 상재하중과 벽면마찰을 고려하였으며, 활동면에서의 힘의 평형관계를 실제적으로 고려하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1992년도 봄 학술발표회 논문집
• /
• pp.51-57
• /
• 1992

The primary objective of this study is the development of second moment methods for the efficient reliability evaluations of structural systems. Two methods are presented. One is the improved first order reliability method (IFORM), and the other is the modified probabilistic network evaluation technique (MPNET). For the purpose of verifying the proposed methods, example analyses are carried out on several cases with two failure modes, a plane frame structure involving three failure modes and simplified parallel member models for fatigue reliability evaluations of offshore structures. Numerical results indicate that the effectiveness of the proposed methods over the conventional ones (i.e., the FORM and the PNET) increases very significantly as the number of failure modes of the system increases.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.442-445
• /
• 1997

With increasing use of high strength concrete tied columns in structural engineering, it becomes necessary to examine the applicability of related sections of current design codes. High strength concrete has an advantage of strength capacity and stiffness especially for column elements. This paper presents an experimental study of high strength concrete tied columns subjected to eccentric loading. The main variables included in this test were concrete compressive strength, steel amount, eccentricity, and slenderness ratio. The concrete compressive strength varied from 34.9Mpa(356kg/$\textrm{cm}^2$ ) to 93.2Mpa(951kg/$\textrm{cm}^2$ ) and the longitudinal steel ratios were between 1.1% and 5.5%. The eccentricity was selected for the different failure modes, i.e., compression control, balanced point, and tension control. The slenderness ratio varied from 19 to 61. The column specimens with same slenderness ratio but with different concrete compressive strength were constructed and tested. The purpose of this paper is to show failure modes of high strength reinforced concrete columns.

• Structural Engineering and Mechanics
• /
• 제5권4호
• /
• pp.433-450
• /
• 1997

The objective of this work is to predict the failure loads, associated maximum transverse displacements, locations and the modes of failure, including the onset of delamination, of thin, flat, square symmetric laminates under the action of uni-axial compression. Two progressive failure analyses, one using Hashin criterion and the other using Tensor polynomial criteria, are used in conjunction with the finite element method. First order shear deformation theory and geometric nonlinearity in the von Karman sense have been employed. Five different types of lay-up sequence are considered for laminates with all edges simply supported. In addition, two boundary conditions, one with all edges fixed and other with mixed boundary conditions for $(+45/-45/0/90)_{2s}$ quasi-isotropic laminate have also been considered to study the effect of boundary restraints on the failure loads and the corresponding modes of failure. A comparison of linear and nonlinear results is also made for $({\pm}45/0/90)_{2s}$ quasi-isotropic laminate. It is observed that the maximum difference between the failure loads predicted by various criteria depend strongly on the laminate lay-ups and the flexural boundary restraints. Laminates with clamped edges are found to be more susceptible to failure due to the transverse shear and delamination, while those with the simply supported edges undergo total collapse at a load slightly higher than the fiber failure load.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.508-518
• /
• 2008

Reliability and sensitivity analysis of the design parameters for a section of caisson type quaywall which is the most applicable in Korea were performed. It was tried to estimate probabilities of failure for the system of the multiple failure modes and to analyze LCC in the quaywall structure. The reliability analysis was performed by FORM. Also, sensitivity indices were estimated using the reliability indices, which may be used inferring effects of each design parameter on the reliability indices. As a result, the coefficient of friction between caisson and rubble, the moment by self weight and the moment of resistance mostly affected on the reliability indices in the sliding, overturning and foundation failure, respectively. System reliability theorem was applied in order to estimate the probabilities of failure for the system of the multiple failure modes. As the results of estimation of the probabilities of failure for the system, all cases were more conservative than those for the elements, according to both failure mode and load combination applied to series system. It entirely exceeded the target reliability index, but it was consistent with the theorem. According to the optimum LCC with the width of the caisson, the probability of failure exceeded the target probability of failure at then time. Therefore, it was judged to be insufficient to the practical application.

• Geomechanics and Engineering
• /
• 제12권6호
• /
• pp.919-933
• /
• 2017

A series of Brazilian tests under diameter compression for disc specimens was carried out to investigate the strength and failure behavior by using acoustic emission (AE) and photography monitoring technique. On the basis of experimental results, load-displacement curves, AE counts, real-time crack evolution process, failure modes and strength property of granite specimens containing two pre-existing holes were analyzed in detail. Two typical types of load-displacement curves are identified, i.e., sudden instability (type I) and progressive failure (type II). In accordance with the two types of load-displacement curves, the AE events also have different responses. The present experiments on disc specimens containing two pre-existing holes under Brazilian test reveal four distinct failure modes, including diametrical splitting failure mode (mode I), one crack coalescence failure mode (mode II), two crack coalescences failure mode (mode III) and no crack coalescence failure mode (mode IV). Compared with intact granite specimen, the disc specimen containing two holes fails with lower strength, which is closely related to the bridge angle. The failure strength of pre-holed specimen first decreases and then increases with the bridge angle. Finally, a preliminary interpretation was proposed to explain the strength evolution law of granite specimen containing two holes based on the microscopic observation of fracture plane.

• 대한산업공학회지
• /
• 제39권2호
• /
• pp.143-148
• /
• 2013

In FMEA, occurrence and detectability are not related to only failure modes itself but also their causes. It is assumed that any failure occurs after at least one cause corresponding to failure occurs in advance. Occurrence of the failure mode is described by occurrence time of its cause and elapsed time to the actual failure. Under the periodic monitoring plan, the monitoring interval is another factor to determine the detectability and occurrence of each failure mode. When a failure cause occurs, the failure does not occur if the cause is identified and remedied before it actually occurs. Under this situation, we construct an economic model for prioritizing failure modes. The loss function is based on the unfulfilled mission period. We also provide an optimal monitoring plan with an illustrative example.

• Structural Engineering and Mechanics
• /
• 제81권1호
• /
• pp.59-68
• /
• 2022

Prestressed prefabricated hollow core concrete slabs with spans of 5 m and 10 m are commonly used since last century and still in service due to the advantage of construction convenience and durability. However, the end slabs are regularly subjected to cracks at the top and fail with brittleness due to the asymmetric boundary conditions. To better maintain such widely used type of hollow core slabs, the effect of asymmetric constraint in the end slabs are systematically studied through detailed nonlinear finite element analyses and experimental data. Experimental tests of slabs with four prestressed tendons and seven prestressed tendons with different boundary conditions were conducted. Results observe three failure modes of the slabs: the bending failure mode, shear and torsion failure mode, and transverse failure mode. Detailed nonlinear finite element models are developed to well match the failure modes and to reveal potential damage scenarios with asymmetric boundary conditions. Recommendations regarding ultimate capacity of the slabs with asymmetric boundary conditions are made to ensure a safe and rational design of prestressed concrete hollow slabs for short span bridges.

• Steel and Composite Structures
• /
• 제25권1호
• /
• pp.45-55
• /
• 2017

Stainless steel exhibits high ductility and strain hardening capacity in comparison with carbon steel widely used in constructions. To analyze the particular behaviour of stainless steel cover-plate joints, an experimental study was conducted. It showed large ductility and complex failure modes of the joints. A non-linear finite element model was developed to predict the main parameters influencing the behaviour of these joints. The results of this deterministic model allow us to built a meta-model by using the quadratic response surface method, in order to allow for efficient reliability analysis. This analysis is then applied to the assessment of design formulae in the currently used codes of practice. The reliability analysis has shown that the stainless steel joint design according to Eurocodes leads to much lower failure probabilities than the Eurocodes target reliability for carbon steel, which incites revising the resisting model evaluation and consequently reducing stainless steel joint costs. This approach can be used as a basis to evaluate a wide range of steel joints involving complex failure modes, particularly bearing failure.