• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.219-222
• /
• 2002

There are screw, reciprocating type turbo compressor by structure in an air compressor which is essential equipment on the industrial spot. Recently, the application range of a turbo compressor tend to be wide gradually. And this type of compressor needs high speed rotation of impeller in structure so high ratio gearbox and conventional induction motor driving required. This mechanical system have results of increased moment of inertia and mechanical friction loss. Recent studies of modern turbo compressor have been applied to developing super high speed BLDC motor and driver which remove gearbox that make its size small and mechanical friction loss minimum. To accomodate this tendency, we tried to develope a super high speed motor drive system for 150Hp, 70,000rpm direct drive Turbo compressor using DSP(Digital Signal Processor) and SVPWM(Space Vector Modulation PWM) technique. The results of this specific application show that super high speed driver and controller could be implemented well with digital electronics.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제9권2호
• /
• pp.75-79
• /
• 2009

A system-on-a-chip communication architecture has a significant impact on the performance and power consumption of modern multi-processors system-on-chips (MPSoCs). However, customization of such architecture for a specific application requires the exploration of a large design space. Thus, system designers need tools to rapidly explore and evaluate communication architectures. In this paper we present the method for application-specific low-power bus architecture synthesis at system-level. Our paper has two contributions. First, we build a bus power model of AMBA AXI bus communication architecture. Second, we incorporate this power model into a low-power architecture exploration algorithm that enables system designers to rapidly explore the target bus architecture. The proposed exploration algorithm reduces power consumption by 20.1% compared to a maximally connected reduced matrix, and the area is also reduced by 20.2% compared to the maximally connected reduced matrix.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.145-150
• /
• 2006

For most of the measuring methods of traditional control theory, measuring equipments are located at the output of the system to measure quantities transformed from non-electrical form into electrical one. This method helps us to define the value of parameters to be measured, but it has limitation because it can only assess the efficiency of a movement process. That means we can not understand the inner kinetics which is the essence of the system. In the modern control theory, states of system are considered as the feedback to the control process, which helps us to assess the elements in the inside of the system. In this paper, we survey methods for estimating states being not exposed to the correct measurements. Using this method, we also suggest an application for giving an estimate of the traffic on the LSPs to adapt the network configuration for changing traffic conditions.

• 한국인공지능학회지
• /
• 제2권1호
• /
• pp.1-3
• /
• 2014

These days, interest and demand on smart learning has rapidly increased. Video English and mobile system based English speaking service have become popular. This study gave prototype of application to give and take voice message with world people and to give new concept of voice pen-pal beyond exchange of text messages. In modern society having rapidly increasing demand on smart learning, you can study foreign language by smart phone and communicate with foreigners by voice anytime and anywhere. The app allows global exchange to learn conversation. Recruitment of initial users and profit model have problems. We shall develop to improve problems and to solve difficulty.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2014년도 추계 종합학술대회 논문집
• /
• pp.327-328
• /
• 2014

Modern life is surrounded by all kinds of information and screen, motion graphics in these media everywhere, you can use it to a special performance of the method, the use of the stage, so that the effect is more vivid stage performance. Stage design industry began to diversify the use of Motion graphic, have long been out of the framework of the traditional background, turn into dynamic video space. In this paper analysis of research papers by the dynamic changes in the graphics arena background, style, affect the application of dynamic images. Summed up in the stage of development that can adapt to the requirements of the times, better performance stage effects and express emotion of the stage performances.

• 한국기술혁신학회:학술대회논문집
• /
• 한국기술혁신학회 2003년도 추계학술대회
• /
• pp.369-386
• /
• 2003

Radiation technologies are being utilized in a wide range of daily modern life and provide the public with valuable benefits through applications in fields of medical, industrial, agricultural, and science & engineering research. On the other hand, there is a high possibility that radioactive materials can be used for malevolent purposes such as dirty bombs. The International community, therefore, has made efforts to improve the security of radioactive sources aimed at protecting the public from radiological terrorism. The paper investigated high-risk radioactive sources which could be used as dirty bombs. The paper reviewed the possibility of radiological weapon attacks and analyzed international trends to enhance security of radioactive sources. This study also proposed our countermeasures to reduce the threat of radiological terrorism and to properly respond to the radiological emergency caused by the radiological weapon attack.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.621-625
• /
• 1996

The feed system of the machine tools is limited by the mechanical transmission elements. However, thanks to the advanced modern technology, those machines are able to equip with linear motors. In this paper, the types and application aspects of linear motor are discussed and a synchronous type of the linear motors has been applied to X-Y table for machining center. The performance shows an outstanding result in terms of the accuracy, speed and stiffness. Machine tool system with linear motors is expected to be more productive machines using linear motor in the near next years.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권4호
• /
• pp.463-469
• /
• 2016

This paper presents a compression-friendly low power test scheme in EDT environment. The proposed approach exploits scan slices reusing to reduce the switching activity during shifting for test scheme based on linear decompressor. To avoid the impact on encoding efficiency from resulting control data, a counter is utilized to generate control signals. Experimental results obtained for some larger ISCAS'89 and ITC'99 benchmark circuits illustrate that the proposed test application scheme can improve significantly the encoding efficiency of linear decompressor.

• Smart Structures and Systems
• /
• 제1권2호
• /
• pp.159-184
• /
• 2005

The paper intends to summarize some guidelines for future smart structure system application in military aircraft. This preview of system integration is based upon a review on approximately one and a half decades of application oriented aerospace related smart structures research. Achievements in the area of structural health monitoring, adaptive shape, adaptive load bearing devices and active vibration control have been reached, potentials have been identified, several feasibility studies have been performed and some smart technologies have been already implemented. However the realization of anticipated visions and previously initial timescales announced have been rather too optimistic. The current development shall be based on a more realistic basis including more emphasis on fundamental aircraft strength, stiffness, static and dynamic load and stability requirements of aircraft and interdisciplinary integration requirements and improvements of integrated actors, actuator systems and control systems including micro controllers.

• 한국컴퓨터정보학회논문지
• /
• 제20권11호
• /
• pp.111-118
• /
• 2015

In this paper, we propose a new tinnitus treatment system that removes the frequency band where the ear noises is generated and amplifies the around frequency bands in order to treat a nonstop buzzing in the ears, that is one among the disease commonly generated in modern people. Mostly the tinnitus is generated by the tunability with the neighboring nerves while the part of the cerebral cortex which is unable to react to the stimuli by the sound of the specific frequency band reacts to other frequency band. Therefore, the excitability activity by the tunability of the cerebral cortex is suppressed and the remedial value is gotten by removing the tinnitus frequency band, and the around frequency bands are amplified to strengthen the remedial value. Experimental results show that the tinnitus can be treated conveniently if the patients use the android application which the proposed technique is applied to.