• 동력기계공학회지
• /
• 제19권3호
• /
• pp.5-10
• /
• 2015

Femtosecond laser machining has been applied for creating a sensor function in silica glass optical fibers. Femtosecond laser pulses make it possible to fabricate micro structures in processed regions of a very thin glass fiber line because femtosecond laser pulses can extremely minimize thermal effects. With the laser machining to optical fiber using a single shot of 210-fs laser at a wavelength of 800 nm, it was observed that a processed region surrounded a thin layer which seemed to be a hollow cavity monitored by scanning electron microscopy (SEM). This study aims at a theoretical investigation for the processed region by using a numerical analysis in order to embed sensing function to optical fibers. Numerical methods based finite element method (FEM) has been used for an optical waveguide modeling. This report suggests two types modeling and describes a comparative study on optical losses obtained by the experiment and the numerical analysis.

• Journal of Electrochemical Science and Technology
• /
• 제13권3호
• /
• pp.323-338
• /
• 2022

Heat generation and temperature of a battery is usually presented by an equation of current. This means that we need to adopt time domain calculation to obtain thermal characteristics of the battery. To avoid the complicated calculations using time domain, 'state of charge (SOC)' can be used as an independent variable. A SOC based calculation method is elucidated through the comparison between the calculated results and experimental results together. Experiments are carried for rapid resistive discharge of a large-capacitive lithium secondary battery to evaluate variations of cell potential, current and temperature. Calculations are performed based on open-circuit cell potential (SOC,T), internal resistance (SOC,T) and entropy (SOC) with specific heat capacity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.37-40
• /
• 2001

This paper presents the modeling methodology of Zinc diffusion process applied for high-speed avalanche photodiode fabrication using neural networks. Three process factors (sealing pressure, amount of Zn$_3$P$_2$ source per volume, and doping concentration of diffused layer) are examined by means of D-optimal design experiment. Then, diffusion rate and doping concentration of Zinc in diffused layer are characterized by a static response model generated by training fred-forward error back-propagation neural networks. It is observed that the process models developed here exhibit good agreement with experimental results.

• 전자공학회논문지SC
• /
• 제44권1호
• /
• pp.67-73
• /
• 2007

본 연구에서는 특정 자동차에 대한 Charging 시스템의 적합성 여부를 판별할 수 있는 충방전 Balance 시뮬레이터의 Prototype을 개발 하였다. 차량운전 환경요건에 따른 운전 패턴 등, 시뮬레이터의 구성을 위해 각종 전기부하와 이와 관련된 배터리 모델링을 하였고 실차실험을 행하여 그 데이터를 분석 정리하였다. 제안하는 모델과 분석된 데이터를 바탕으로 충방전 시뮬레이터를 개발하였고, 개발된 시뮬레이터는 정해진 차종으로 임의의 주행환경으로 운전할 때 차량의 전기에너지 공급 문제를 실차실험을 한 것과 같이 분석할 수 있다

• 동력기계공학회지
• /
• 제9권4호
• /
• pp.175-180
• /
• 2005

Incorrections between model and plant are parameter, system order uncertainties and modeling error due to disturbance like friction. Therefore to achieve a good tracking performance, adaptive discrete time sliding mode tracking controller is used under time-varying desired position. Based on the diophantine equation, a new discrete time sliding function is defined and utilized for the control law. Robustness is increased by using both a recursive least-square method and a sliding function-based nonlinear feedback. The effectiveness of the proposed control algorithm is proved by the results of simulation and experiment.

• 한국정밀공학회지
• /
• 제13권11호
• /
• pp.82-91
• /
• 1996

In this study, we put our object to carry out adaptive modeling of cutting process in turning system, and to find out the optimal cutting conditions to maximize material removal rate under some constraints. We used a back-propagation neural network to model the cutting process adaptively and a genetic algorithm to find out optimal cutting conditions. The experimental results show that a back-propagation neural network could model the cutting process effciently, and optimized cutting conditions for maximizing the material removal rate were obtained through the adaptive process model and genetic algorithms. Therefore, the proposed approach can be applied to the real machining system.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2003년도 5월 학술대회지
• /
• pp.75-78
• /
• 2003

In this paper, we describe a cross-morpheme pronunciation variation model which is especially useful for constructing morpheme-based pronunciation lexicon for Korean LVCSR. There are a lot of pronunciation variations occurring at morpheme boundaries in continuous speech. Since phonemic context together with morphological category and morpheme boundary information affect Korean pronunciation variations, we have distinguished pronunciation variation rules according to the locations such as within a morpheme, across a morpheme boundary in a compound noun, across a morpheme boundary in an eojeol, and across an eojeol boundary. In 33K-morpheme Korean CSR experiment, an absolute improvement of 1.16％ in WER from the baseline performance of 23.17％ WER is achieved by modeling cross-morpheme pronunciation variations with a context-dependent multiple pronunciation lexicon.

• Journal of Information Technology Applications and Management
• /
• 제17권3호
• /
• pp.1-24
• /
• 2010

Most of enterprises depend on a data modeler during developing their management information systems. In formulating business requirements for information systems, they widely and naturally use the interview method between a data modeler and a field worker. But, the discrepancy between both parties would certainly cause information loss and distortion that lead to let the systems not faithful to real business works. To improve or avoid modeler-dependant data modeling process, many automated data design CASE tools have been introduced. However, since most of traditional CASE tools just support drawing works for conceptual data design, a data modeler could not generate an ERD faithful to real business works and a user could not use them without any knowledge on database. Although some CASE tools supported conceptual data design, they still required too much preliminary database knowledge for a user. Against these traditional CASE tools, we proposed a Requirement-Oriented Entity Relationship Model for automated data design tool, called ROERM. Based on Non-Stop Methodology, ROERM adopts inner systematic modules for complete and sound ERD that is faithful to real field works, where modules are composed of interaction modules with a user, rules of schema operations and sentence translations. In addition to structure design of ROERM, we also devise detailed algorithms and perform an experiment for a case study.

• 핵의학기술
• /
• 제15권1호
• /
• pp.17-24
• /
• 2011

현재 핵의학 분야에서는 디지털 컴퓨터의 급속한 발전 및 응용으로 인해 FBP 법의 대용으로 OSEM 알고리즘과 같은 고속 영상 재구성 알고리즘이 널리 이용되고 있다. 그 동안 여러 연구에서 파라미터 변경에 따른 OSEM 재구성 영상 질 변화에 대한 평가가 이루어져 왔으나, 어떠한 파라미터를 적용할 지에 관해서는 명확하게 정해진 것은 없다. 본 연구에서는 3D beam modeling을 적용한 3D OSEM 재구성 법에서 iteration 횟수와 subset 개수 변경에 따른 영상의 질 변화를 팬텀 실험과 환자 데이터을 통해 확인하고자 한다. 환자 데이터는 2010년 8월부터 9월까지 본원 핵의학과에서 Brain SPECT를 시행한 환자 5명을 대상으로 연구 분석하였다. 영상은 물과 $^{99m}Tc$ (500 MBq)을 균등하게 혼합한 Jaszczak 팬텀을 이용하여 Siemens사의 이중 헤드 감마 카메라 Symbia T2에서 획득하였다. 환자 데이터는 영상 재구성 시 환자 데이터와 팬텀 데이터 모두 iteration 횟수는 1, 4, 8, 12, 24, 48회, subset 개수는 2, 4, 8, 16, 32개로 변화를 주며 각각의 영상을 재구성하였다. 재구성된 각각의 영상에서 대조도와 영상의 잡음 정도를 가늠하기 위한 변이계수, FWHM을 산출하여 비교하였다. 팬텀 데이터와 환자 데이터에서 영상의 대조도와 공간해상력은 iteration 횟수와 subset 개수의 증가에 따라 모두 선형적으로 증가하는 경향을 나타냈으나 변이계수는 두 파라미터의 증가에 따라 향상되는 경향을 보이지 않았다. Projection 시간에 따른 비교에서도 Projection 당 10초, 20초, 30초 영상에서 모두 영상 대조도와 FWHM은 iteration 횟수와 subset 개수 증가에 따라 선형적으로 향상되는 결과를 나타냈으나 변이계수는 향상되는 경향을 보이지 않았다. 본 실험을 통해 3D beam modeling을 적용한 3D OSEM 재구성 법 영상에서도 기존의 1D와 2D OSEM 재구성 법과 같이 iteration 횟수와 부분집합 개수 증가에 따라 향상하는 영상 대조도의 선형적 관계를 확인할 수 있었다. 하지만 이는 단순한 팬텀 실험과 일부 환자 데이터 만으로 얻은 결과이고, 실제 임상에서는 보다 구조적으로 복잡한 대상과 다양한 변수들이 존재 가능하기 때문에 본 실험의 데이터만을 바탕으로 이를 일반화하기에는 무리가 있으며 차후 실험들을 통해 3D OSEM 재구성 법에 대한 평가가 추가로 이루어져야 할 것이다.

• 대한기계학회논문집A
• /
• 제22권4호
• /
• pp.762-767
• /
• 1998

The main torsional vibration source of the powertrain is the fluctuation of engine torque. The gear rattle is impact generating in the backlash of the free gear due to this torsional vibration. Optimization of the clutch torsional characteristic is one of the effective method to reduce the idle gear rattle. Many researches have been reported on this problem but only few of them give sufficient consideration to the detailed clutch modeling and the experiment. This paper pays attention to the optimization of clutch design parameters and the experiment to reduce the idle gear rattle vibration and noise.