• East Asian Economic Review
• /
• 제19권2호
• /
• pp.117-142
• /
• 2015

This paper uses a 53-country 15-industry computable general equilibrium model of trade to analyze the effects of the Korea-China free trade agreement on the Korean economy, the manufacturing sector in particular. The model is based on Yaylaci and Shikher (2014) which uses the Eaton-Kortum methodology to explain intra-industry trade. The model predicts that the Korea-China FTA will increase Korea-China manufacturing trade by 56%, manufacturing employment in Korea by 5.7% and China by 0.55%. The model also predicts significant reallocation of employment across industries with the Food industry in Korea losing jobs and other industries there gaining jobs, with the Medical equipment industry gaining the most. There will be some trade diversion from the ASEAN countries, as well as Japan and the United States.

• 전기학회논문지
• /
• 제66권6호
• /
• pp.905-910
• /
• 2017

As the development of BESS(Battery Energy Storage System), the application of BESS in load frequency control is considered as effective method. So, KEPCO(Korea Electric Power Corporation) have installed about 236MW ESS for GF(Govner Free) function from 2014. In this paper, we implemented Simulink Model for KEPCO GF ESS and analyzed one year historical operation data generated by Simulink model and actually measured frequency data. The operation results were divided into action for maintaining SOC and frequency. In addition, we also analyzed cycle life of GF ESS using two ESS cycle life model. We concluded the ESS cycle life models are not appropriate, because Most of the SOC swing in operation results are below 10%.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권3호
• /
• pp.2013-2017
• /
• 2013

Background: To compare the effects of two adjuvant chemotherapy regimens, anthracycline-based and cyclophosphamide, methotrexate, fluorourical (CMF) on disease free survival for breast cancer patients in the Eastern Mediterranean region and Asia. Methods: In a systematic review with a multivariate mixed model meta-analysis, the reported survival proportion at multiple time points in different studies were combined. Our data sources were studies linking the two chemotherapy regimens on an adjuvant basis with disease free survival published in English and Persian in the Eastern Mediterranean region and Asia. All survival curves were generated with Graphdigitizer software. Results: 14 retrospective cohort studies were located from electronic databases. We analyzed data for 1,086 patients who received anthracycline-based treatment and 1,109 given CMF treatment. For determination of survival proportions and time we usesb the transformation Ln (-Ln(S)) and Ln (time) to make precise estimations and then fit the model. All analyses were carried out with STATA software. Conclusions: Our findings showed a significant efficacy of anthracycline-based adjuvant therapy regarding disease free survival of breast cancer. As a limitation in this meta-analysis we used studies with different types of anthracycline-based regimens.

• 한국항공우주학회지
• /
• 제44권6호
• /
• pp.463-467
• /
• 2016

본 연구에서는 충격파 풍동을 이용하여 초음속 환경에서 사람 모델이 받는 압력과 가속도를 측정하였다. 전자석과 철가루가 내포되어 있는 3차원 사람 모델을 이용하여 모델 지지대로 인한 유동 흐름의 방해가 없는 자유 낙하 기법을 사용하였다. 마하 4 유동조건에 서 자유 낙하 실험을 수행하였으며, 실험을 통해 획득한 유동 가시화 이미지로 시간에 따른 사람 모델의 위치 변화를 파악하고 이를 통해 모델에 가해진 힘을 측정하였다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제13권2호
• /
• pp.109-116
• /
• 2013

The solder is any of various fusible alloys, usually tin and lead, used to join metallic parts that provide the contact between the chip package and the printed circuit board. Solder plays an important role of electrical signals to communicate between the two components. In this study, two kinds of Ag-free solder as sample is made to conduct the thermal shock test and the high humidity temperature test. Low resistance is measured to estimate crack size of solder, using daisy chain. The low speed shear test is also performed to analyze strength of solder. The appropriate degradation model is estimated using the result data. Depending on the composition of solder, lifetime estimation is conducted by adopted degradation model. The lifetime estimated two kinds of Ag-free solder is compared with expected lifetime of Sn-Ag-Cu solder. The result is that both Ag-free composition are more reliable than Sn-Ag-Cu solder.

• Steel and Composite Structures
• /
• 제29권3호
• /
• pp.363-377
• /
• 2018

An efficient and free of shear locking finite element model is developed and employed to study free vibration of tapered bidirectional functionally graded material (BFGM) beams. The beam material is assumed to be formed from four distinct constituent materials whose volume fraction continuously varies along the longitudinal and thickness directions by power-law functions. The finite element formulation based on the first-order shear deformation theory is derived by using hierarchical functions to interpolate the displacement field. In order to improve efficiency and accuracy of the formulation, the shear strain is constrained to constant and the exact variation of the cross-sectional profile is employed to compute the element stiffness and mass matrices. A comprehensive parametric study is carried out to highlight the influence of the material distribution, the taper and aspect ratios as well as the boundary conditions on the vibration characteristics. Numerical investigation reveals that the proposed model is efficient, and it is capable to evaluate the natural frequencies of BFGM beams by using a small number of the elements. It is also shown that the effect of the taper ratio on the fundamental frequency of the BFGM beams is significantly influenced by the boundary conditions. The present results are of benefit to optimum design of tapered FGM beam structures.

• Ocean and Polar Research
• /
• 제26권2호
• /
• pp.361-365
• /
• 2004

Deep-sea Resources Research Center (DRRC) has been using a free-fall grab (FFG) for the resource evaluation of polymetallic nodules in the KODOS (Korea Deep Ocean Study) area, NE Pacific, since 1992. A FFG model (Model 4200, Benthos) adapting one glass buoy system (diameter 17 inch, net buoyance 25.4 kg) has been used until 1993. Since then, DRRC has carried out a study to increase the recovery rate of FFG and it was found that a revised system adapting an additional buoy (diameter 10 inch, net buoyance 4.5 kg) gives improved results. The nodule sampling tests were performed using two different models for the same study area and the resulting recovery rates were compared. The result shows no distinct difference in recovery time between two models, but average recovery rate of the revised model was increased to 99.44% from 96.06% of the original model.

• Structural Engineering and Mechanics
• /
• 제82권2호
• /
• pp.245-258
• /
• 2022

Many Structural Health Monitoring (SHM) methods have been proposed for structural damage diagnosis and prognosis. However, SHM for pinched hysteretic structures can be problematic due to the high level of nonlinearity. The model-free hysteresis loop analysis (HLA) has displayed notable robustness and accuracy in identifying damage for full-scaled and scaled test buildings. In this paper, the performance of HLA is compared with seven other SHM methods in identifying lateral elastic stiffness for a six-story numerical building with highly nonlinear pinching behavior. Two successive earthquakes are employed to compare the accuracy and consistency of methods within and between events. Robustness is assessed across sampling rates 50-1000 Hz in noise-free condition and then assessed with 10% root mean square (RMS) noise added to responses at 250 Hz sampling rate. Results confirm HLA is the most robust method to sampling rate and noise. HLA preserves high accuracy even when the sampling rate drops to 50 Hz, where the performance of other methods deteriorates considerably. In noisy conditions, the maximum absolute estimation error is less than 4% for HLA. The overall results show HLA has high robustness and accuracy for an extremely nonlinear, but realistic case compared to a range of leading and recent model-based and model-free methods.

• 한국멀티미디어학회논문지
• /
• 제25권4호
• /
• pp.600-609
• /
• 2022

In supervised learning, labeling of all data is essential, and in particular, in the case of object detection, all objects belonging to the image and to be learned have to be labeled. Due to this problem, continual learning has recently attracted attention, which is a way to accumulate previous learned knowledge and minimize catastrophic forgetting. In this study, a continaul learning model is proposed that accumulates previously learned knowledge and enables learning about new objects. The proposed method is applied to CenterNet, which is a object detection model of anchor-free manner. In our study, the model is applied the knowledge distillation algorithm to be enabled continual learning. In particular, it is assumed that all output layers of the model have to be distilled in order to be most effective. Compared to LWF, the proposed method is increased by 23.3%p mAP in 19+1 scenarios, and also rised by 28.8%p in 15+5 scenarios.

• 대한기계학회논문집A
• /
• 제33권12호
• /
• pp.1417-1426
• /
• 2009

Various types of damper are usually applied to reduce noise and vibration for mechanical systems. Especially, for washing machines, the free-friction stroke damper is installed. The behavior of the free-friction stroke damper has nonlinear characteristics such as hysteresis and viscoelastic properties because of its foam material. First of all, the dynamic experiments were carried out by using a MTS machine to find characteristics of the free-friction stroke damper. And the simulation model of the free-friction stroke damper and characteristics of a foam material were evaluated by using optimization technique. To make a good simulation model which can show the dynamic characteristics, it is important to understand the working mechanism of the damper. The Finite Element Method (FEM) technique can help us instinctively understand the damping phenomenon under operating conditions, because we can observe the condition of damper at every step in the simulation by using it. Also, by changing factors, we can comprehend the variation of characteristics of damper. So, in this paper, a study on the dynamic characteristics of free-friction stroke damper by FEM is focused on. Finally, the possibility which physical experiments can be replaced into simulations is shown.