• Journal of Korea Port Economic Association
• /
• v.27 no.4
• /
• pp.73-90
• /
• 2011

Global companies regard the conditions of a location as one of the most crucial factors to assess the competitiveness of ports and the port hinterland, as well as emphasize creation of throughput and the importance of value added logistics in the hinterland under diffusing Supply Chain Management(SCM). This study deals with the evaluation of competitiveness in 7 hinterlands and the establishment of assessment model in hinterland. This study analyzes the importance of factors for the port hinterland competitiveness using AHP method. As a result, logistics factor, accounting for 62.3%, is shown as the relative more important factor, followed by hinterland's economy factors(27.3%) and city/policy factor(10.4%). The result implicates that measures to activate logistics factors with relatively high importance are essentially needed in order to improve the competitiveness of the hinterland of Busan New Port. Especially, it is needed to establish service routes of the port and air networks and to expand infrastructure for support. This study also assesses the competitiveness of hinterlands for the seven domestic and foreign ports based on importance of assessment factors for the hinterland competitiveness using AHP analysis. Busan(3.903) is ranked fourth behind Singapore(4.570), Hong Kong(4.357) and Shanghai(4.042) in assessment.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.4
• /
• pp.58-67
• /
• 2014

The proportion of investment in national R&D projects in construction and transportation has been increasing continuously; in terms of the size of R&D projects, there are many medium- to large-sized projects of over KRW 10 billion. However, in spite of such continuous increase in R&D investments, there are many technologies developed but not commercialized, i.e., the quiescence of technology. Accordingly, it is necessary to link the R&D results to commercialization by expanding the scope of R&D projects. In this context, this study presented objective reference prices to be used in contracting/transacting technology and implementing commercialization strategy by conducting technology valuations against on-going research projects with earnings approach, and by estimating value of patented technology. Sum of free cash flow (business value) that can be generated during the life of the technology was estimated as KRW 512 million by reflecting a discount rate of 16.34% to convert it into the present value. In addition, the technology value was computed as KRW 227million by applying a technology factor of 44.39% to the above value. Based on the technology value estimated in this way, it is necessary to establish industrialization and commercialization strategy of the technology.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.433-438
• /
• 2006

When we consider to develop a new harbor, the most important factor, we think, is the lowest water depth of waterway and approaching channel for safe navigation of vesse. The existing harbors have been being dredged to meet the international trend of jumbo sized vessels by adopting the new design criteria. As the dredged materials over the expected at the design level were common and there are still lack of land based reclamation area, we have no choice to discharge the dredged materials in open sea area. In this study, we analysed the behavior of discharged materials at the dumping area of offshore open sea, which were collected from the dredging work at the waterway in Busan New Port. We measured the tidal currents and analyzed the waters of dumping site after the dumping work. these were used to evaluate the numerical models. Suspended Solids(SS) were introduced to the diffusion model. Because of the characteristics of the dumping site, the speed of initial diffusion and settle down of the discharged materials was so fast. Therefore, we believe that the dumped materials do not cause a significant impact to the marine environment.

• Journal of KIISE:Software and Applications
• /
• v.31 no.4
• /
• pp.411-419
• /
• 2004

When the imaging object rotates in image plane during MRI scan, its rotation causes phase error and non-uniform sampling to MRI signal. The model of the problem including phase error non-uniform sampling of MRI signal showed that the MRI signals corrupted by rotations about an arbitrary center and the origin in image plane are different in their phases. Therefore the following methods are presented to improve the quality of the MR image which includes the artifact. The first, assuming that the angle of 2-D rotational motion is already known and the position of 2-D rotational center is unknown, an algorithm to correct the artifact which is based on the phase correction is presented. The second, in case of 2-D rotational motion with unknown rotational center and unknown rotational angle, an algorithm is presented to correct the MRI artifact. At this case, the energy of an ideal MR image is minimum outside the boundary of the imaging object to estimate unknown motion parameters and the measured energy increases when the imaging object has an rotation. By using this property, an evaluation function is defined to estimate unknown values of rotational angle at each phase encoding step. Finally, the effectiveness of this presented techniques is shown by using a phantom image with simulated motion and a real image with 2-D translational shift and rotation.

• Journal of Science Education
• /
• v.44 no.2
• /
• pp.240-258
• /
• 2020

The advances in science technology brought about a new form of learning called flipped-learning: a combination of on-line and off-line learning. A flipped learning is a form of blended learning which has become quite popular, nowadays, in the field of education. Despite the emphasis on the importance of medical humanities in medical education program, there are no effective teaching and learning models to realize the purpose of medical humanities education. This study explores the possibility of flipped-learning to apply medical humanities classes. The class was designed based on the ADDIE model consisting of five stages, analysis - design - development - execution - evaluation. In order to do 'flipped-learning,' the instructor reconstructs the purpose of medical humanities education, instructional purpose and content, and analyzed learner. The contents of the medical humanities class were structured considering the purpose of the introduction to the medical humanities in the medical education program and the competencies that medical personnel should have in the developed health care environment. The instructor produces a video of the lecture and makes it possible to use LMS (Learning Management System) before and after classes, and conducts discussion activities so that learner-learner and learner-teacher interaction could actively occur during the class. The result of applying medical humanities lesson as flipped learning is as follows: First, it can realize the essence of medical humanities education. Second, it contributes to strengthening the competencies of health care provider. Third, flip learning can be used as a new teaching strategy for medical humanities education. The result of this study is expected to suggest new ways of introduction to teaching method in the traditional medical humanities class and contribute to the practice of designing and doing flipped learning of medical humanities class in the future.

• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.524-530
• /
• 2019

Purpose: In this paper, we construct a detailed three-dimensional interface element using a three-dimensional analysis program, and evaluate the composite behavior stability of the connector by applying physical properties such as the characteristics of general members and those of reinforced members Method: The analytical model uses solid elements, including non-linear material behavior, to complete the modeling of beam structures, circular flanges, bolting systems, etc. to the same dimensions as the design drawing, with each member assembled into one composite behavior linkage. In order to more effectively control the uniformity and mesh generation of other element type contact surfaces, the partitioning was performed. Modeled with 50 carbon steel materials. Results: It shows the displacement, deformation, and stress state of each load stage by the contact adjoining part, load loading part, fixed end part, and vulnerable anticipated part by member, and after displacement, deformation, The effect of the stress distribution was verified and the validity of the design was verified. Conclusion: Therefore, if the design support of the micro pile is determined based on this result, it is possible to identify the Vulnerable Parts of the composite behavior connector and the degree of reinforcement.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.1
• /
• pp.43-53
• /
• 2014

A single plate connection(SPC) consists of a plate welded to the columns and bolts connected to the beam web. The SPC is widely used for a simple shear connection of steel structure because it is easy-to-fabricated, easy-to-installed and economical. The conventional SPC is used for 2 to 12 bolts in a single vertical row. It is designed to limit the plate thickness by bolt diameter to obtain flexible and ductile connections. The design strength for eccentric shear shall be the lesser of the shear strength of bolts or bearing strength of plate and when the design strength is decided by edge distance failure, the results can be very conservative. Although the research on special solution for 'weak-plate/strong-bolt' model with 2 to 4 bolts has been conducted by L. S. Muir, and W. A. Thonton, 2004, study on generalized design procedures did not conduct. This study proposed design procedure for evaluation of the design strength of eccentric shear bolt groups on a single plate connection based on the actual edge distance and the direction of bolt reaction forces by using elastic vector method(EVM) and instantaneous center of rotation method(ICM).

• Journal of Korean Society of Steel Construction
• /
• v.23 no.2
• /
• pp.199-210
• /
• 2011

The cables in cable-stayed bridges are under high stress and are very sensitive to vibration due to their small section areas compared with other members. Therefore, it is reasonable to evaluate the cable impact factor by taking into account the dynamic effect due to moving-vehicle motion. In this study, the cable impact factors were evaluated via moving-vehicle-load analysis, considering the design parameters, i.e., vehicle weight, cable model, road surface roughness, vehicle speed, longitudinal distance between vehicles. For this purpose, two steel composite cable-stayed bridges with 230- and 540-m main spans were selected. The results of the analysis were then compared with those of the influence line method that is currently being used in design practice. The road surface roughness was randomly generated based on ISO 8608, and the convergence of impact factors according to the number of generated road surfaces was evaluated to improve the reliability of the results. A9-d.o.f. tractor-trailer vehicle was used, and the vehicle motion was derived from Lagrange's equation. 3D finite element models for the selected cable-stayed bridges were constructed with truss elements having equivalent moduli for the cables, and with beam elements for the girders and the pylons. The direct integration method was used for the analysis of the bridge-vehicle interaction, and the analysis was conducted iteratively until the displacement error rate of the bridge was within the specified tolerance. It was acknowledged that the influence line method, which cannot consider the dynamic effect due to moving-vehicle motion, could underestimate the impact factors of the end-cables at the side spans, unlike moving-vehicle-load analysis.

• Journal of Korea Water Resources Association
• /
• v.50 no.11
• /
• pp.781-793
• /
• 2017

In this study, applicabilities of aerodynamic approaches for the estimation of pan evaporation were evaluated on 56 study stations in South Korea. To accomplish this study purpose, previous researchers' evaporation estimation equations based on aerodynamic approaches were grouped into seven generalized evaporation models. Furthermore, four multiple linear regression (MLR) models were developed and tested. The independent variables of MLR models are meteorological variables such as wind speed, vapor pressure deficit, air temperature, and atmospheric pressure. These meteorological variables are required for the application of aerodynamic approaches. In order to consider the effect of autocorrelation, MLR models were developed after differencing variables. The applicability of MLR models with differenced variables was compared with that of MLR models with undifferenced variables and the comparison results showed no significant difference between the two methods. The study results have indicated that there is strong correlation between estimated pan evaporation (using aerodynamic models and MLR models) and measured pan evaporation. However, pan evaporation are overestimated during August, September, October, November, and December. Most of meteorological variables that are used for MLR models show statistical significance in the estimation of pan evaporation. Vapor pressure deficit was turned out to be the most significant meteorological variable. The second most significant variable was air temperature; wind speed was the third most significant variable, followed by atmospheric pressure.

• Journal of Korean Society of Transportation
• /
• v.30 no.2
• /
• pp.29-42
• /
• 2012

Recently, traffic congestion has become serious due to increase of private car usages. Carsharing or other innovative public transportation systems were developed to alleviate traffic congestion and carbon emissions. These measures can make the traffic environment more comfortable, and efficient. Cloud Transportation System (CTS) is a recent carsharing model. User can rent an electronic vehicles with various traffic information through the CTS. In this study, a concept, vision and scenarios of CTS are introduced. And, authors analyzed the location of CTS rental stations and estimated CTS demands. Firstly, we analyze the number of the population, employees, students and traffic volume in study areas. Secondly, the frequency and utilization time are examined. Demand for CTS in each traffic zone was estimated. Lastly, the CTS rental station location is determined based on the analyzed data of the study areas. Evaluation standard of the determined location includes accessibility and density of population. And, the number of vehicles and that of parking zone at the rental station are estimated. The result suggests that Haewoondae Square parking lot would be assigned 11 vehicles and 14.23 parking spaces and that Dongbac parking lot be assigned 7.9 vehicles and 10.29 parking spaces. Further study requires additional real-time data for CTS to increase accuracy of the demand estimation. And network design would be developed for redistribution of vehicles.