• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.5
• /
• pp.35-43
• /
• 2016

In order to understand rotation behavior of high strength steel endplate connections under fire, this study is compared with existing studies conducted using FEA program. Eurocode 3 presents the three failure modes according to the prediction of bending resistance moment. The parameters of analysis model are temperature, thickness and steel materials of endplate. The rotation stiffness, and bending resistance moment are analyzed according to the parameters. The change of rotation stiffness and bending resistance moment are analyzed about the parameters, regression equations are suggested the change of high strength steel endplate connections. Consequently, the regression equations were proposed as the linear and quadratic equation. The moment ratio of high strength steel under fire was more reduced than the carbon steel, and was small effect about the thickness. When the high strength steel under fire was compared with at ambient temperature, the slope of initial rotation stiffness reduced, the increment ratio of moment was slow, and the change of plastic rotation stiffness wasn't effect by the thickness increase.

• Journal of Food Hygiene and Safety
• /
• v.25 no.2
• /
• pp.143-147
• /
• 2010

Chronic exposure to Arsenic (As) causes significant human health effects including various cancers. Total As concentrations from 300 polished rice samples cultivated near the mining areas in Korea were analyzed to estimate a probabilistic assessment of human health risk from As-contaminated rice. The mean of total As concentrations in rice was 0.09 mg/kg and lognormal distribution model was set for total As concentrations. Human health risk for As in rice was estimated using gender-specific rice consumption data and average daily dose (ADD). While cancer risk (CR) and hazard quotient (HQ) were calculated using oral cancer slope factor (OCSF) and Reference dose (RfD) suggested by the U.S. EPA. Mean of CR posed by total As was 2.16 (for male) and 1.83 (for female) per 10,000. The HQ for general population from rice cultivated near the mining areas in Korea was below 1 as the $50^{th}$ percentile of general population. However, less than 10% of general population consuming rice cultivated near the mining areas would exceed 1.0. This result is similar with those from each gender-specific group.

• Journal of Korea Water Resources Association
• /
• v.30 no.2
• /
• pp.177-191
• /
• 1997

The influences of the space allocation of design rainfall and partition of the subbasin on the characteristics of urban storm runoff was investigated for the 6 drainage basins by applying SWMM model. It show the deviation of -54.68∼18.77% in the peak discharge when we applied the composed JUFF quantiles to the two zones which are divided by upper and lower region of the basin. Then it is compared with the value for the case of using uniform rainfall distribution all over the drainage. Therefore, it would be helpful to decrease the flood risk when we adopt the space distribution of the design rainfall. The effects of the partitioning the drainage on the computing result shows various responses because of the surface characteristics of the each basin such as slope, imperviousness ratio, buy we can get closer result to the measured value as we make the subbasin detailed. If we use the concept of the skewness and area ratio when we determine the width of subbasin, we can improve the computed result even with fewer number of subbasins. We expect reasonable results which close into the measured results in the range of relative error, 25%, when we divide the basin into more than 3 subbasins and the total urban drainage area is less than 10$\textrm{km}^2$.

• Journal of the Korean Geophysical Society
• /
• v.10 no.1
• /
• pp.13-25
• /
• 2007

We investigated the undulation of Moho depth and the crustal structure of the continental margin in the East Sea along the Korea Peninsula from inversion and modelling using potential data and previous seismic results. Free-air gravity anomalies generally reflect topography effect. Bouguer gravity anomalies increase toward the Ulleung Basin, indicating that Moho depth is shallower under the Ulleung Basin. Positive magnetic anomalies exist along the continental margin and decrease toward the Ulleung Basin. In analytic signal, the small anomaly in the Hupo Bank infers that the Hupo Bank is uplifted by igneous intrusion and the strong anomaly on the continental slope denotes existence of SDR(seaward dipping reflectors), which are in accordance with the location of SDR detected in previous seismic studies. The inversion result of Bouguer gravity anomaly and the 2-dimensional gravity modelling indicate that the undulation of Moho depth shallows from the continental shelf toward the Ulleung Basin. This is in good agreement with the Moho depth calculated by the previous seismic velocity model using ocean bottom seismometer(OBS). The 2-dimensional gravity modelling infers magmatic underplating zone under the lower continental crust on the continental margin of the East Sea, indicating the possible rifiting of the continental margin.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.5
• /
• pp.525-534
• /
• 2005

A column experiment was performed to investigate the influence of the sludge cake development on the riverbed and the hydraulic gradient imposed by the drawdown at the well on the filtrate quality in order to offer a guideline in the design and operation of the riverbed filtration. Results show that the sludge cake on the riverbed plays an important role in the removal of the organic matter. Under the conditions of this study the COD removal rate increased from 17% to 50% along with the sludge cake development, which was equivalent to the BCOD removal of 22% and 67%, respectively. The active removal of the organic matter took place in the sludge cake and the upper 40 cm of the riverbed. As the flow rate increased owing to the increase in the head difference imposed on the column, the slope of the COD profile near the column inlet decreased, however, the profiles converged in about 40 cm from the inlet. In 10 days of sludge cake formation the dissolved oxygen was depleted at the depth of 70 cm, which suggests the denitrification can take place beyond the depth. This depth was further reduced to $20{\sim}40\; cm$ as the sludge cake developed. From this study the removal of organic matter can be expected through the riverbed filtration even with the depth of as shallow as 3 m, which is frequently met in Korea, while the removal of nitrogen through denitrification is not expected to be active under the condition.

• Journal of Korean Society of Forest Science
• /
• v.78 no.3
• /
• pp.323-330
• /
• 1989

Pinass densiflora natural forests of four local forms in Korea were studies to investigate effective biomass estimation method. Dimension analysis was used and three allometric regression models, such as logWt=A+BlogD, logWt=$A+B1ogD^2H$ and 1ogWt=A+BlogD+ClogH were applied to estimate biomass, The most accurate estimation was made by the regression model of logWt=A+BlogD+ClogH where Wt is dry weight, D is diameter at breast height, and H is tree height. However, dry weights of cones and dead branches were remotely related to tree size factor, such as D and H. In the interest of practical use. generalized allometric regressions for all samples trees of four stands were computed and analysis of covariance was used to compare the allometric regressions among the four stands. Based on the test criteria applied in this study, significant differences were found in terms of error variance and regression intercept, not in terms of regression slope. These trends suggest a generalized biomass regression is not valid for accurate estimation over a range of four local form stands.

• Proceedings of the Korean Society of Environment and Ecology Conference
• /
• 2005.04a
• /
• pp.85-101
• /
• 2005

This study was carried out a field survey and review articles to investigate a characteristic of the distribution pattern in Korean endemic Corylopsis coreana. Distribution of Corylopsis coreana was found from Boseung-gun, Gwangyang-si, Suncheon- si, Jeumanl-myeon Goheung-gun, Ganjeon-myeon Gurye-gun, Mt. Cheongwan Jangheung-gun, Nogodan Mt. Jiri in Jeollanam-do, Mt. Cheonhwang Namwon-si and Beamsagol and Banyabong Mt. Jiri, in Jeollabuk-do, Sancheong-gun, hadong-gun and Namhea-gun in Gyeongsangnam-do and Mt. Backun, Pocheon-si in Gyeonggi-do. Total flora in the distribution region of Coryloplsis coreana were recorded as 242 taxa; 70 families, 159 genus, 216 species, 22 varieties, 4 forma. Ratio of taxonomic categories was consisted of Pteridophyte $5.8\%$, Gymnosperm $3.7\%$, Dicotyledon $18.6\%$ and Monocotyledon $71.9\%$. Ratio of Life cycle styles was Annual $1.7\%$ and Perennial $98.3\%$. Ratio of growth habit was appeared to Herb $44.2\%$, Vine $12.4\%$, Shrub $17.8\%$ and Tree $25.6\%$. The distribution region of Corylopsis coreana found to typical type which distribute in N, NE or NE slope. The native Corylopsis coreana of Sinjeonri Sungju-eup in Jellanam-do appeared to a declining tendency which caused by influence of tree lager.

• Journal of Korean Society of Forest Science
• /
• v.108 no.4
• /
• pp.574-581
• /
• 2019

The present study analyzed the productivity and cost of winching operations for evaluating the efficiency of a tractor-attached winch in a Pinus densiflora thinning site located in the Yangyang County of Gangwon-do. The mean yarding distance and mean timber volume were 29 m and 0.15 ㎥, respectively. In the 95 cycles of yarding operations, the uphill and downhill yarding operations constituted 51% and 49%, respectively, of the total yarding operations. The productivity of the uphill yarding operation was 2.28 ㎥/h, and the productivity of the downhill yarding operation was 1.89 ㎥/h. The findings of this study revealedthat productivity would increase by 0.5 ㎥/h when the rate of utilization of the machine is increased to 80% by reducing the operational delay time. The cost of the downhill yarding operation was 44,116 KRW/㎥, whereas that of the uphill yarding operation was 53,369 KRW/㎥. The difference in cost resulted from the difference in the number of yarding stems (stems/cycle). Furthermore, the results of the multiple linear regression equation developed for predicting the yarding operation times showed that productivity was significantly affected by working conditions such as yarding distance (m), the number of stems per cycle (stems/cycle), and the terrain slope (%) in the uphill and downhill yarding operations. Further research is required for developing an accurate prediction model equation according to a yarding direction.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.1
• /
• pp.80-85
• /
• 2011

This paper presents the design of the power-assisted controller for the in-wheel type smart wheelchair by using torque estimation that is predicted by relationship between input voltage and output wheel angular velocity. Nowadays, interest of the moving assistant aids is increased according to the increase in population of the elderly and the handicapped person. However some of the moving assistant aids have problems. For example, manual wheelchair has difficulty moving at the slope, because users lack the muscular strength of their arm. In electric wheelchair case, users should be weak by being decreased muscles of upper body. To overcome these problems, power-assisted electric wheelchair are proposed. Most of the power-assisted electric wheelchair have the special rims that can measure the user's power. In here, the rims have to be designed to install the sensors to measure user's power. In this paper, we don't design the rim to measure the man power. To predict the man power, we propose a control algorithm of the in-wheeled electric wheelchair by using torque estimation from the wheel. First, we measure the wheel velocity and voltage at the in-wheel electric wheelchair. And then we extract driving will forces by using proposed mathematical model. Also they are applied at the controller as the control input, we verify to be able to control in-wheel type smart wheelchair by using simulation.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1115-1123
• /
• 2008

When constructing projects such as road embankments, bridge approaches, dikes or buildings on soft, compressible soils, significant settlements may occur due to the consolidation of these soils under the superimposed loads. The compressibility of the soil skeleton of a soft clay is influenced by such factors as structure and fabric, stress path, temperature and loading rate. Although it is possible to determine appropriate relations and the corresponding material parameters in the laboratory, it is well known that sample disturbance due to stress release, temperature change and moisture content change can have a profound effect on the compressibility of a clay. The early research of Tezaghi and Casagrande has had a lasting influence on our interpretation of consolidation data. The 24 hour, incremental load, oedometer test has become, more or less, the standard procedure for determining the one-dimensional, stress-strain behavior of clays. An important notion relates to the interpretation of the data is the ore-consolidation pressure ${\sigma}_p$, which is located approximately at the break in the slope on the curve. From a practical point of view, this pressure is usually viewed as corresponding to the maximum past effective stress supported by the soil. Researchers have shown, however, that the value of ${\sigma}_p$ depends on the test procedure. furthermore, owing to sampling disturbance, the results of the laboratory consolidation test must be corrected to better capture the in-situ compressibility characteristics. The corrections apply, strictly speaking, to soils where the relation between strain and effective stress is time independent. An important assumption in Terzaghi's one-dimensional theory of consolidation is that the soil skeleton behaves elastically. On the other hand, Buisman recognized that creep deformations in settlement analysis can be important. this has led to extensions to Terzaghi's theory by various investigators, including the applicant and coworkers. The main object of this study is to suggestion the modified compression index value to predict settlements by back calculating the $C_c$ from different numerical models, which are giving best prediction settlements for multi layers including very thick soft clay.