• Agribusiness and Information Management
• /
• v.6 no.2
• /
• pp.32-39
• /
• 2014

The goal of this research was to develop a portable system that could be used to evaluate the quality of milk in real time at a raw milk production site. A real-time portable quality evaluation system for raw milk was developed to enable non-destructive quality evaluation of somatic cell count (SCC), fat, protein, lactose, and total solid (TS) in milk samples. A prediction model of SCC, fat, protein, lactose, and TS was constructed using partial least squares (PLS) and 200 milk samples were used to evaluate the prediction performance of the portable quality evaluation system and high performance spectroscopy. Through prediction model development and verification, it was found that the accuracy of high performance spectroscopy was 90% for SSC, 96% for fat, 96% for protein, 91% for lactose, and 97% for TS. In comparison, the accuracy of the portable quality evaluation system was relatively low, at 90% for SSC, 95% for fat, 92% for protein, 89% for lactose, 92% for TS. However, the measurement time for high performance spectroscopy was 10 minutes for 1 sample, while for the portable quality evaluation system it was 6 minutes. This means that the high performance spectroscopy system can measure 48 samples per day (8 hours), while the portable quality evaluation system can measure 80 (8 hours). Therefore, it was found that the portable quality evaluation system enables quick on-site quality evaluation of milk samples.

• Food Science of Animal Resources
• /
• v.37 no.5
• /
• pp.682-689
• /
• 2017

The aim of this study was to investigate the digestibility of different Korean Hanwoo beef cuts using an in vitro digestion model, in vitro physicochemical upper gastrointestinal system (IPUGS). The four most commonly consumed cuts - tenderloin, sirloin, brisket and flank, and bottom round - were chosen for this study. Beef samples (75 g) were cooked and ingested into IPUGS, which was composed of mouth, esophagus, and stomach, thereby simulating the digestion conditions of humans. Digested samples were collected every 15 min for 4 h of simulation and their pH monitored. Samples were visualized under a scanning electron microscope (SEM) to examine changes in the smoothness of the surface after digestion. Analysis of the amino acid composition and molecular weight (MW) of peptides was performed using reverse-phase high performance liquid chromatography and sodium dodecyl sulfate polyacrylamide gel electrophoresis, respectively. Following proteolysis by the gastric pepsin, beef proteins were digested into peptides. The amount of peptides with higher MW decreased over the course of digestion. SEM results revealed that the surface of the digested samples became visibly smoother. Total indispensable and dispensable amino acids were the highest for the bottom round cut prior to digestion simulation. However, the total amount of indispensable amino acids were maximum for the tenderloin cut after digestion. These results may provide guidelines for the elderly population to choose easily digestible meat cuts and products to improve their nutritional and health status.

• Economic and Environmental Geology
• /
• v.29 no.2
• /
• pp.151-158
• /
• 1996

Rb-Sr isochron ages, Sr and Nd isotopic compositions were determined for late Cretaceous granophyre on the Haenam-Wando areas, the southwestern part of the Yeongdong-Kwangju depression in Korea. The granophyre in the Haenam-Wando areas are distributed in the shape of a resurgent cauldron. Five samples of Haenam granophyre give a defined Rb-Sr whole rock isochron age of $75.7{\pm}7.2Ma$ and Sr initial ratio of $0.70826{\pm}0.00020(2{\sigma})$. Plagioclase, orthoclase and whole rock of Haenam granophyre give a defined Rb-Sr whole rock-mineral isochron age of $67.0{\pm}5.8Ma$ and Sr initial ratio of $0.708880{\pm}0.00028(2{\sigma})$. Five samples of Wando granophyre give a defined Rb-Sr whole rock isochron age of $70.6{\pm}3.3Ma$ and Sr initial ratio of $0.70850{\pm}0.00088(2{\sigma})$. Eight samples of Haenam granophyre give a defined Nd isotope ratios of 0.512180~0.512259 and ${\varepsilon}Nd$ (T) values of -6.53~-8.15, ${\varepsilon}Sr$ (T) values of +51.49~+66.48 and model age of 1.28~1.60 Ga. Four samples of Wando granophyre give a defined Nd isotope ratios of 0.512228~0.512289 and ${\varepsilon}Nd$ (T) values of -6.74~-8.00, ${\varepsilon}Sr$ (T) values of +54.88~+78.98 and model age of 1.14~1.42 Ga.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1297-1303
• /
• 2020

In this study, nuclear radiation shielding and rigidity parameters of Y (0.1-x)B0.6Bi1.8O3La2x glassy system were investigated in order to determine it's suitability for use as nuclear radiation shielding materials. Therefore, a group of bismuth borate glass samples with La₂O₃ additive were synthesized using the technique of melt quenching. According to the results, the increase of the La₂O₃ additive increases the density of the glass samples and the mass attenuation coefficient (μ_m) values, whereas the half-value layer (HVL) and mean free path (MFP) values decrease. The effective atomic number (Z_eff) is also enhanced with an increment of both mass removal cross section for neutron (Σ_R) and absorption neutron scattering cross section (σ_abs). In addition to the other parameters, rigidity parameter values were theoretically examined. The increase of La₂O₃ causes some other important magnitudes to increase. These are the average crosslink density, the number of bonds per unit volume, as well as the stretching force constant values of these glass samples. These results are in concordance with the increase of elastic moduli in terms of the Makishima-Mackenzie model. This model showed an increase in the rigidity of the glass samples as a function of La₂O₃.

• Korean Journal of Food Science and Technology
• /
• v.23 no.2
• /
• pp.157-160
• /
• 1991

Copper constantan thermocouples connecting to a recording potentiometer were inserted at the center of the patties and the samples were fried. In general, the internal temperature of the patty samples increased approximately $11.1^{\circ}C$ after the samples were removed from the fryer. The desired internal temperature and maximum internal end-point temperature, at different frying temperatures, can be obtained by adjusting the frying time. The yields of the patties decreased as maximum internal end-point temperature increased or as frying time increased. The internal temperature and maximum internal end-point temperature of the patty samples at three frying temperatures were predicted using polynominal regression of a third-order model with one independent variable, frying time. Polynominal regression of a second-order model with maximum internal end-point temperature as the independent variable was used to predict frying yields at three frying temperatures.

• Journal of Environmental Science International
• /
• v.31 no.2
• /
• pp.171-180
• /
• 2022

Zeolitic material, Z-Y3, was synthesized from coal fly ash (CFA) under low-alkaline conditions (NaOH/CFA ratio = 0.3 and NaOH solution concentrations of 0.0, 0.5, and 1.0 M) using a fusion/hydrothermal method. The adsorption capacities of the fabricated Z-Y3 samples for Cs and Sr ions and the desorption capacity of Na ions were evaluated. The XRD patterns of the Z-Y3 sample fabricated using a 1.0 M NaOH solution (Z-Y3 (1.0 M)) indicated the successful synthesis of a zeolitic material, because the diffraction peaks of Z-Y3 coincided with those of the Na-A zeolite in the 2θ range of 7.18-34.18. Moreover, the SEM images revealed that morphology of the Z-Y3 (1.0 M) sample, which presented zeolitic materials characteristics, consisted of sharp-edged cubes. The adsorption isotherms of Cs and Sr ions on all the fabricated Z-Y3 samples were described using the Langmuir model, and the maximum adsorption capacities of Cs and Sr were calculated to be 0.14-0.94 mmol/g and 0.19-0.78 mmol/g, respectively. The desorption of Na ions from the Cs and Sr ions adsorbed Z-Y3 samples followed the Langmuir desorption model. The maximum desorption capacities of Na ions from the Cs and Sr ions adsorbed Z-Y3 (1.0 M) samples were 1.28 and 1.49 mmol/g, respectively.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2000.11a
• /
• pp.91-93
• /
• 2000

Soybean meal(SMB) has not only been an important source of protein, but also a major source of isolfavones(IF) for poultry diet. Since the IF is one of effective phytoestrogens, evaluation of bioavailability of the phytochemicals for poultry and development of an animal model for assessment of the availability should be essential for its practical application. Present study was to develop bird model for assessing their bioavailability. No reports for such measurments with poultry could have every been found. Eight, 6-wk-old, layer-type, male birds were divided into two groups of four birds; normal (N) and colostomized(COL). Each bird was tube-fed a SMB sample at a level of 1% body weight. Samples from blood, urine and feces(COL birds) or urine+feces (N) were collected at 0, 2, 8, 15, 24 and 48 hours after the feeding. Plasma and urine samples were treated with -glucuronidase and fecal samples with 4N HCl for measurement of genistein(GE) and daidzein (DA) with HPLC set with an electrochemical detector. Maximum peaks of plasma IF appeared at 2 h after the meal for both birds groups. However the IF peak for N group was GE, while that for COL group was DA. Plasma DA levels for COL birds were always higher than those of GE, which was in opposite trend for N birds. This trend observed in the N birds is in accordance with those reported in rats fed SBM. In conclusion the results seem to suggest that colostomy as an attempt to separate urine from feces in birds affected the IF metabolism in the intestine and may not be a proper bird model to measure the IF bioavailability.

• Journal of Applied Reliability
• /
• v.13 no.2
• /
• pp.117-127
• /
• 2013

In this paper, we studied the correlation between the activation energy($E_a$) of the raw materials and the structural characteristics of the White LED PKGs. The samples used in the study were composed of low power LED 3type and high power LED 5type. To calculate the activation energy($E_a$) of the White LED PKGs conducted three conditions of high temperature operation test based on the Arrhenius model. The number of samples used in the experiment is 10, respectively. The $T_j$ of Conditions and target specifics expressed $T_{j1}$, $T_{j2}$, $T_{j3}$. The activation energy ($E_a$) of the samples was calculated based on the value of the actually measured lifetime. We investigated the correlation between the activation energy ($E_a$) of the raw materials and the structural characteristics of the White LED PKGs. As a result, White LED PKGs activation energy($E_a$) value was confirmed that the material properties affected more than the structural characteristics of the LED PKGs and we found that activation energy of each LED Model has difference. Normally, The activation energy of phosphor of YAG type was indicated from 0.21 to 0.25[eV] and Silicate type was indicated from 0.12 to 0.16[eV]. According to the results, we confirmed that the activation energy of phosphor of YAG type is higher more than The activation energy of phosphor of Silicate type.

• YAKHAK HOEJI
• /
• v.45 no.4
• /
• pp.378-386
• /
• 2001

A purified histone Hl protein, p961, which plays a role in mediating the condensation of DNA into chromatin, was recently proved as an arthritis-suppressing agent in the mouse CIA model. The pharmacokinetics of p961 was carried out in rats and rabbits. The rat's blood, bile and urine samples were serially collected from the femoral vein, common bile duct, and bladder respectively, after bolus i.v. injection at low (10 mg/kg) and high (30 mg/mg) doses. The rabbit's blood samples were also collected from the marginal ear vein after bolus i.v. injection at a dose 10 mg/kg. p961 and its major metabolite in the physiological samples were analyzed by reverse-phase HPLC using a Yydac C4 protein column and a multistep water-acetonitrile gradient containing 0.24% trifluoroacetic acid. The major pharmacokinetic parameters (AUC, $C_{max}$, MRT, $t_{1}$2/, $V_{ss}$ and Cl) were estimated from the time course of plasma p961 and metabolite concentrations using WinNonlin. A two-compartment model was chosen for p961 as the most appropriate pharmacokinetic model. After i.v. injection of p961 at doses of 10 mg/kg and 30 mg/kg, more than 80% of p961 was removed rapidly from the plasma within 15 min. The plasma half-life of p961 in rats and rabbits was found not to exceed 12 min. p961 (22448.9 mol wt) was rapidly cleaved to 21612 mot wt fragment and the breakdown product appeared rapidly in the circulation with no lag phase. p961 and metabolite were not detected in rat urine and bile....

• Journal of Radiation Industry
• /
• v.6 no.1
• /
• pp.23-29
• /
• 2012

In this study, we investigated the genetic variation in the general of monocot model plant (rice) in response to various ionizing irradiations including gamma-ray, ion beam and cosmic-ray. The non-irradiated and three irradiated (200 Gy of gamma-ray and 40 Gy of ion beam and cosmic-ray) plants were analyzed by AFLP technique using capillary electrophoresis with ABI3130xl genetic analyzer. The 29 primer combinations tested produced polymorphism results showing a total of 2,238 bands with fragments sizes ranged from 30 bp to 600 bp. The number of polymorphism generated by each primer combinations was varied significantly, ranging from 2 (M-CAC/E-ACG) to 158 (M-CAT/E-AGG) with an average of 77 bands. Polymorphic peaks were detected as 1,269 with an average of 44 per primer combinations. By UPGMA (Unweighted Pair Group Method using Arithmetic clustering) analysis method, the clusters were divided into non-irradiated sample and three irradiated samples at a similarity coefficient of 0.41 and three irradiation samples was subdivided into cosmic-ray and two irradiation samples (200 Gy of gamma-ray and 40 Gy of ion beam) at similarity coefficient of 0.48. Similarity coefficient values ranged from 0.41 to 0.55.