• Title/Summary/Keyword: model reduction method

Search Result 1,978, Processing Time 0.028 seconds

A study on the comparison by the methods of estimating the relaxation load of SEM-pile (SEM파일의 이완하중 산정방법별 이완하중량 비교 연구)

  • Kim, Hyeong-Gyu;Park, Eun-Hyung;Cho, Kook-Hwan
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.20 no.3
    • /
    • pp.543-560
    • /
    • 2018
  • With the increased development in downtown underground space facilities that vertically cross under a railway at a shallow depth, the demand for non-open cut method is increasing. However, most construction sites still adopt the pipe roof method, where medium and large diameter steel pipes are pressed in to form a roof, enabling excavation of the inside space. Among the many factors that influence the loosening region and loads that occur while pressing in steel pipes, the size of the pipe has the largest impact, and this factor may correspond to the magnitude of load applied to the underground structure inside the steel pipe roof. The super equilibrium method (SEM) has been developed to minimize ground disturbance and loosening load, and uses small diameter pipes of approximately 114 mm instead of conventional medium and large diameter pipes. This small diameter steel pipe is called an SEM pile. After SEM piles are pressed in and the grouting reinforcement is constructed, a crossing structure is pressed in by using a hydraulic jack without ground subsidence or heaving. The SEM pile, which plays the role of timbering, is a fore-poling pile of approximately 5 m length that prevents ground collapse and supports surface load during excavation of toe part. The loosening region should be adequately calculated to estimate the spacing and construction length of the piles and stiffness of members. In this paper, we conducted a comparative analysis of calculations of loosening load that occurs during the press-in of SEM pile to obtain an optimal design of SEM. We analyzed the influence of factors in main theoretical and empirical formulas applied for calculating loosening regions, and carried out FEM analysis to see an appropriate loosening load to the SEM pile. In order to estimate the soil loosening caused by actual SEM-pile indentation and excavation, a steel pipe indentation reduction model test was conducted. Soil subsidence and soil loosening were investigated quantitatively according to soil/steel pipe (H/D).

Model Development of Affecting Factors on Health Behavior and Juvenile Delinquency of Adolescents (청소년의 건강행위와 비행의 영향 요인에 관한 모형 구축)

  • Kim, Hyeon Suk;Kim, Hwa Jung
    • Journal of the Korean Society of School Health
    • /
    • v.11 no.2
    • /
    • pp.171-187
    • /
    • 1998
  • In recent years, adolescent issues including smoking, drinking, drug abuse, juvenile delinquency, deviant sexual behavior, mental health problems, high suicide rate, juvenile delinquency and absence without due notice, etc are emerging as serious social problems and the debate on these controversial issues is heating up. The previous studies on adolescent health behavior and social juvenile delinquency such as run-away from home and absence without due notice have been conducted mostly by cause analysis utilizing social demographic factors or biological factors. In other words, the main factors analyzed were demographic and economic factors or parent's educational level, etc, which were the fixed environmental ones that were unable to cause the change in the health behavior. Accordingly, the purpose of this study is to analyze factors which are changeable and fixable among the factors influencing the adolescent's health behavior and misconducts and, eventually influencing factors which can be used as the basis to establish health policies and health promotion program to reduce the health risk behavior and misconducts of adolescents. The study subjects were selected by dividing senior high school student in Seoul by region and through random sampling. The 890 subjects were selected from 10 schools including the preparatory school, vocational schools and institutional schools. The duration of the study was for July 1-5, 1997 for the first survey and the second one, for August 25-September 10. Regarding the analysis method, the SAS program was used. The adoptablity of theoretical model was tested through covariance structural analysis utilizing PC-LISREL 8.12 Program. The major findings of the study are as follows: As a result of establishing the model of factors influencing health behavior and juvenile delinquency, in case of male students as the health behavior self-efficacy, education level of fathers, economic level, self-control and the health interest of parent were higher, students were more likely to practice the health promoting behavior. Juvenile delinquency and health risk behavior were prevalent among those with the less shyness, the lower health behavior self-efficacy, lower self-control, lower self-assertiveness, lower economic level. The self-control was the most powerful factor. In case of female students, those with higher health behavior self-efficacy were more likely to practice the health promoting behavior whereas those with lower health behavior self-efficacy, lower self-control, lower self- assertiveness, less shyness were more likely to practice health risk behavior and juvenile delinquency. In case of prep schools, those with higher health behavior self-efficacy and better perceived health status were more likely to practice the health promoting behavior while those with less shyness, lower health behavior self-efficacy and lower academic achievement were more likely to engage in health risk behavior and juvenile delinquency. In case of vocational schools, as health behavior self-efficacy and economic level were higher, the practice rate of health promoting behavior was higher. As the self-control, shyness, self-assertiveness, health behavior self-efficacy were lower, the rate of health risk behavior and juvenile delinquency were higher. In case of social institutional schools, as, the health behavior self-efficacy, social support and economic level, health interest of parents were higher, the rate of health promoting behavior were higher. As the self-control, shyness, self-assertiveness, health behavior self-efficacy and social support were lower, the rate of health risk behavior and juvenile delinquency were higher. So the health promoting behavior was positively related to the health behavior self-efficacy, health interest of parents, social support, education level of fathers, level of perceived health status, economic level. The health risk behavior and juvenile delinquency were higher with the lower health behavior self-efficacy, self-control and self-assertiveness, lower health locus control, less shyness and loneliness, lower economic level and academic achievement. In conclusion, the health risk behavior and juvenile delinquency can be reduced by enhancing self-control, self-assertiveness, health behavior self-efficacy and social support. According to the final model drawn by connecting health behavior and juvenile delinquency, the reduction of health risk behavior can greatly contribute to decreasing social juvenile delinquency as the process of juvenile delinquency was extended from common behaviors to problem behaviors and further into juvenile delinquency.

  • PDF

Dual Codec Based Joint Bit Rate Control Scheme for Terrestrial Stereoscopic 3DTV Broadcast (지상파 스테레오스코픽 3DTV 방송을 위한 이종 부호화기 기반 합동 비트율 제어 연구)

  • Chang, Yong-Jun;Kim, Mun-Churl
    • Journal of Broadcast Engineering
    • /
    • v.16 no.2
    • /
    • pp.216-225
    • /
    • 2011
  • Following the proliferation of three-dimensional video contents and displays, many terrestrial broadcasting companies have been preparing for stereoscopic 3DTV service. In terrestrial stereoscopic broadcast, it is a difficult task to code and transmit two video sequences while sustaining as high quality as 2DTV broadcast due to the limited bandwidth defined by the existing digital TV standards such as ATSC. Thus, a terrestrial 3DTV broadcasting with a heterogeneous video codec system, where the left image and right images are based on MPEG-2 and H.264/AVC, respectively, is considered in order to achieve both high quality broadcasting service and compatibility for the existing 2DTV viewers. Without significant change in the current terrestrial broadcasting systems, we propose a joint rate control scheme for stereoscopic 3DTV service based on the heterogeneous dual codec systems. The proposed joint rate control scheme applies to the MPEG-2 encoder a quadratic rate-quantization model which is adopted in the H.264/AVC. Then the controller is designed for the sum of the left and right bitstreams to meet the bandwidth requirement of broadcasting standards while the sum of image distortions is minimized by adjusting quantization parameter obtained from the proposed optimization scheme. Besides, we consider a condition on maintaining quality difference between the left and right images around a desired level in the optimization in order to mitigate negative effects on human visual system. Experimental results demonstrate that the proposed bit rate control scheme outperforms the rate control method where each video coding standard uses its own bit rate control algorithm independently in terms of the increase in PSNR by 2.02%, the decrease in the average absolute quality difference by 77.6% and the reduction in the variance of the quality difference by 74.38%.

Comparing Farming Methods in Pollutant runoff loads from Paddy Fields using the CREAMS-PADDY Model (영농방법에 따른 논에서의 배출부하량 모의)

  • Song, Jung-Hun;Kang, Moon-Seong;Song, In-Hong;Jang, Jeong-Ryeol
    • Korean Journal of Environmental Agriculture
    • /
    • v.31 no.4
    • /
    • pp.318-327
    • /
    • 2012
  • BACKGROUND: For Non-Point Source(NPS) loads reduction, pollutant loads need to be quantified for major farming methods. The objective of this study was to evaluate impacts of farming methods on NPS pollutant loads from a paddy rice field during the growing season. METHODS AND RESULTS: The height of drainage outlet, amount of fertilizer, irrigation water quality were considered as farming factors for scenarios development. The control was derived from conventional farming methods and four different scenarios were developed based combination of farming factors. A field scale model, CREAMS-PADDY(Chemicals, Runoff, and Erosion from Agricultural Management Systems for PADDY), was used to calculate pollutant nutrient loads. The data collected from an experimental plot located downstream of the Idong reservoir were used for model calibration and validation. The simulation results agreed well with observed values during the calibration and validation periods. The calibrated model was used to evaluate farming scenarios in terms of NPS loads. Pollutant loads for T-N, T-P were reduced by 5~62%, 8~37% with increasing the height of drainage outlet from 100 mm of 100 mm, respectively. When amount of fertilizer was changed from standard to conventional, T-N, T-P pollutant loads were reduced by 0~22%, 0~24%. Irrigation water quality below water criteria IV of reservoir increased T-N of 9~65%, T-P of 9~47% in comparison with conventional. CONCLUSION(S): The results indicated that applying increased the height of drainage after midsummer drainage, standard fertilization level during non-rainy seasons, irrigation water quality below water criteria IV of reservoir were effective farming methods to reduce NPS pollutant loads from paddy in Korea.

Experimental Analysis of Nodal Head-outflow Relationship Using a Model Water Supply Network for Pressure Driven Analysis of Water Distribution System (상수관망 압력기반 수리해석을 위한 모의 실험시설 기반 절점의 압력-유량 관계 분석)

  • Chang, Dongeil;Kang, Kihoon
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.36 no.6
    • /
    • pp.421-428
    • /
    • 2014
  • For the analysis of water supply network, demand-driven and pressure-driven analysis methods have been proposed. Of the two methods, demand-driven analysis (DDA) can only be used in a normal operation condition to evaluate hydraulic status of a pipe network. Under abnormal conditions, i.e., unexpected pipe destruction, or abnormal low pressure conditions, pressure-driven analysis (PDA) method should be used to estimate the suppliable flowrate at each node in a network. In order to carry out the pressure-driven analysis, head-outflow relationship (HOR), which estimates flowrate at a certain pressure at each node, should be first determined. Most previous studies empirically suggested that each node possesses its own characteristic head-outflow relationship, which, therefore, requires verification by using actual field data for proper application in PDA modeling. In this study, a model pipe network was constructed, and various operation scenarios of normal and abnormal conditions, which cannot be realized in real pipe networks, were established. Using the model network, data on pressure and flowrate at each node were obtained at each operation condition. Using the data obtained, previously proposed HOR equations were evaluated. In addition, head-outflow relationship at each node was analyzed especially under multiple pipe destruction events. By analyzing the experimental data obtained from the model network, it was found that flowrate reduction corresponding to a certain pressure drop (by pipe destruction at one or multiple points on the network) followed intrinsic head-outflow relationship of each node. By comparing the experimentally obtained head-outflow relationship with various HOR equations proposed by previous studies, the one proposed by Wagner et al. showed the best agreement with the exponential parameter, m of 3.0.

Experimental Study on Effectiveness of Wave Reduction and Prevention Erosion of Nourishment Sand Using the Cell Group (Cell Group을 이용한 파랑저감 및 양빈사 유실방지에 관한 실험적 연구)

  • Park, Sang Kil;Park, Hong Bum;Kim, Young Hwan
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.29 no.5
    • /
    • pp.269-277
    • /
    • 2017
  • Recently, a submerged breakwater has been installing to prevent the erosion of shoreline everywhere. Artificially submerged breakwater is made to minimize the loss of nourishment sand beach erosion. For this reason, it has been indiscriminately constructed submerged breakwater that is planned in the country throughout. However, maintenance purposes to keep the shoreline of the beach is a method that is quite a few problems. There are also disadvantages such as expensive construction costs, ocean space utilization, water pollution and shoreline modification. In addition, person of utilizing the space of the ocean leisure does not like that because of the disconnection of ocean space. The beaches such as Gwanganri are artificially supplying nourishment sand to maintain the beach. The flexible construction method refers to a structure that is installed as a flexible material instead of submerged breakwater to prevent the loss of nourishment sand. In order to develop a new method to mitigate shoreline erosion, this study was carried out a hydraulic model experiment by installing a cell group as an example of the flexible method. Namely, in order to prevent the loss of nourishment sand, we decided to develop a new method that can mitigate the degree of beaches erosion by using cell group instead of submerged breakwater. In the two dimensional fixed hydraulic experiment, was carried out the effect reducing of wave height and the rate of low reflection due to the installation of the cell group. In movable bed experiment, the capture rate of the nourishment sand and the erosion prevention rate of the nourishment sand was performed for stability of shoreline. Therefore, according to the results of the hydraulic tests, it was possible to maintain the stable beaches due to installing the cell group on the erosion beaches, due to the effect of reducing wave height, the low reflection, the erosion prevention rate of nourishment sand, the high capture rate of nourishment sand.

Influencing Factors Analysis for the Number of Participants in Public Contracts Using Big Data (빅데이터를 활용한 공공계약의 입찰참가자수 영향요인 분석)

  • Choi, Tae-Hong;Lee, Kyung-Hee;Cho, Wan-Sup
    • The Journal of Bigdata
    • /
    • v.3 no.2
    • /
    • pp.87-99
    • /
    • 2018
  • This study analyze the factors affecting the number of bidders in public contracts by collecting contract data such as purchase of goods, service and facility construction through KONEPS among various forms of public contracts. The reason why the number of bidders is important in public contracts is that it can be a minimum criterion for judging whether to enter into a rational contract through fair competition and is closely related to the budget reduction of the ordering organization or the profitability of the bidders. The purpose of this study is to analyze the factors that determine the participation of bidders in public contracts and to present the problems and policy implications of bidders' participation in public contracts. This research distinguishes the existing sampling based research by analyzing and analyzing many contracts such as purchasing, service and facility construction of 4.35 million items in which 50,000 public institutions have been placed as national markets and 300,000 individual companies and corporations participated. As a research model, the number of announcement days, budget amount, contract method and winning bid is used as independent variables and the number of bidders is used as a dependent variable. Big data and multidimensional analysis techniques are used for survey analysis. The conclusions are as follows: First, the larger the budget amount of public works projects, the smaller the number of participants. Second, in the contract method, restricted competition has more participants than general competition. Third, the duration of bidding notice did not significantly affect the number of bidders. Fourth, in the winning bid method, the qualification examination bidding system has more bidders than the lowest bidding system.

Nursing Delivery System Improvement Plan in A Hospital (간호전달 체계 개선 방안 - 일 병동을 중심으로 -)

  • Lee, Jin-Hi;Lee, Sung-Ae;Ham, Yong-Hee;Yang, Myong-Ju;Kim, Ok-Sohn
    • Quality Improvement in Health Care
    • /
    • v.3 no.2
    • /
    • pp.52-59
    • /
    • 1997
  • Background : In many Nursing Delivery System, Nursing Department at D Hospital had used to traditional nursing practice model what is called functional activities based system. It has a lot of merit that carried out specialized and rapid works but tend to ignore indivisual professional responsibility and task-based work assignments. In addition this system showed high turnover rates due to heavy workload, timesum of handing over duties, lack of support from peers and interstaff communication. So we performed conversion of Nursing Delivery System to My Patients Nursing Care System for providing comprehensive nursing to patient and reducing turnover rates and increasing job satisfaction to nurse. Method : 1. 1st step(96.4.9): Detected the problem of Nursing delivery System and estabilished improving planning 2. 2nd step(96.4.26): Visited other hospital on job training 3. 3th step(96.4.29): Discussed to premonitoring problem after conversion Nursing Delivery System and prepared structure 4. 4th step(96.5.6): My Patients Nursing Care System practical application 5. 5th step(96.7.20): Held complementary meeting 6. 6th step(96. 7): The other ward application 7. 7th step(96. 10): Extended application to whole wards Results: 1. Workload: (1) reduction(55.6%) (2) addition(44.4%) 2. Strong points after conversion: (1) decreased timesum of handing overduties (35.2%) (2) increased responsibility(33%) (3) broaden nurse's outlook to duties(14.8%) 3. Shortcoming after conversion: (1) understanding difficulties except my patient(57.8%) (2) weak teamwork(23.3%) (3) intensive stress to low grade nurse(12.2%) 4. Effective complemental way: (1) manpower(76.7%) (2) conversion of though (8.9%) (3) education(14.4%) 5. Patient's satisfaction: (1) satisfaction(64%) (2) no effect(36%) 6. Physician and peer's satisfaction: (1) satisfaction(12.5%) (2) dissatisfaction(21.6%) (3) no interest(44.3%) 7. Nurse's satisfaction: (1) satisfaction(74.7%) (2) dissatisfaction(5.5%) (3) unknown(20.5%) 8. Want to continued: (1) want(76.4%) (2) try to any other system(18%) Conclusion : Even though Nursing Delivery System conversion still has many problem, we gained more merits than traditional nursing delivery system. So we suggest that My Patients Nursing Care System should be encouraged for comprehensive nursing care and satisfaction to nurses.

  • PDF

Analysis of Design Live Load of Railway Bridge Through Statistical Analysis of WIM Data for High-speed Rail (고속철도 WIM 데이터에 대한 통계분석을 통한 철도교량 설계활하중 분석)

  • Park, Sumin;Yeo, Inho;Paik, Inyeol
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.28 no.6
    • /
    • pp.589-597
    • /
    • 2015
  • In this paper, the live load model for the design of high-speed railway bridge is analyzed by statistic and probabilistic methods and the safety level that is given by the load factors of the load combination is analyzed. This study is a part of the development of the limit state design method for the railway bridge, and the train data collected from the Gyeongbu high-speed railway for about one month are utilized. The four different statistical methods are applied to estimate the design load to match the bridge design life and the results are compared. In order to examine the safety level that the design load combination of the railway bridge gives, the reliability indexes are determined and the results are analyzed. The load effect from the current design live load for the high-speed rail bridge which is 0.75 times of the standard train load is came out greater than at least 30-22% that from the estimated load from the measured data. If it is judged based on the ultimate limit state, there is a possibility of additional reduction of the safety factors through the reliability analysis.

An Empirical Analysis on the Production and Price Effect by Agricultural Disaster Insurance (농업재해보험의 생산량 및 가격 효과에 관한 실증분석)

  • Han, Sungmin
    • KDI Journal of Economic Policy
    • /
    • v.36 no.4
    • /
    • pp.135-169
    • /
    • 2014
  • This study empirically analyzes changes in production patterns of farmers by agricultural disaster insurance. The aim of this project is to achieve stability of farm management by paying insurance in case of a natural disaster. However, it causes farmers to change production patterns in the direction of increasing production, and leads the crop price to drop. This can be explained by producers' risk reduction through the disaster insurance. The empirical analysis is based on IV approach with using two stage least squares method. The first stage estimates by difference-in-differences methodology indicate that the production of insurable crops increases more about 80,000ton on average than that of non-insurable crops. In addition, to solve the endogeneity problem caused by general supply and demand model, I use the first stage estimates and find that the price index of the crops drops about 2.3% according to the production increase by 10,000ton. The credibility of these results is also attained by various robustness checks. These findings suggest that it is necessary for government to analyze the whole economy which consists of producer and consumer welfare when it determines the policy. Besides, it implies that it is essential to develop a new market to cope with the unintended effect.

  • PDF