• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.6
• /
• pp.642-648
• /
• 2015

Recently, there have been many studies pertaining to reducing energy consumption on ships. As part of those studies, the energy consumption of ships can be reduced by understanding and controlling the varying loads, excluding fixed loads. In existing ships, engine room fans are usually operated based on the actual experience of the crew without any special guidelines. To realize energy reduction, we investigate the characteristics of engine-room fans, and we propose an energy-management system called the engine room fan control system (ERFCS) and the ERFCS algorithm. The ERFCS controls the fan speed depending on the temperature and pressure, where one to four fans are operated depending on changes in the load. In addition, the minimum rotation speed of the engine-room fan was limited to 50% to prevent the surging phenomenon, which is due to fan damage or low pressure resulting from mechanical friction or heating at low fan speeds. We develop a fan control system simulation model using LabVIEW that is based on the proposed algorithm and ISO 8861. Finally, we perform simulations to confirm that operation of the proposed fan control system is possible using only 46.4% of the power required by the existing method.

• Journal of Food Hygiene and Safety
• /
• v.22 no.4
• /
• pp.395-400
• /
• 2007

Apricot Kernel, consumed as herbal medicine, contains amygdalin which generate HCN upon hydrolysis. Dyspnea was reported by ingesting large amount of apricot kernel, and neurological disorders such as tropic ataxic neuropathy or konzo were known as chronic toxicity of amygdalin. Other cyanogen containing plants, including flaxseed and almond, are consumed as food around the world. Moreover, some of them are promoted as functional food, leading to higher consumption, and posing health risk by cyanogenic components. The objective of this study was to find a method for the reduction of the cyanogenic compound, using apricot kernel as a model food. The most effective reduction was obtained by boiling the slices of the kernel for one hour in pH 1 HCl solution, showing 90% removal. However, the common process known to reduce the cyanogen contents, i.e., long incubation at the low temperature, did not show significant change in cyan concentration. Our data contribute to the safety of the plants containing cyanogenic compounds if they were to be developed as foodstuff.

• Journal of the Korean Geographical Society
• /
• v.46 no.1
• /
• pp.50-66
• /
• 2011

Biofuel crops and their economical benefits have been recently researched as one of the alternative energy sources. Very few studies, however, have brought an issue about the impacts of the new cropping on environment, especially water quality. Because biofuel cropping requires more crop production with more fertilizers for cost-effectiveness, water quality near the new crops as well as downstream is expected to be degraded. In this study, the impacts of biofuel crop production on water quality was estimated by scenarios between pre-biofuel cropping and post-biofuel cropping using the previously calibrated SWAT (Soil and Water Assessment Tool) model in a watershed in Texas, USA. Then, 30 meter filter strips were implemented on each biofuel ropland as a mitigation method. The economical and agricultural aspect and requirements of biofuel cropping was also previously investigated. The on-site impacts estimation showed that biofuel cropping increased about 250% to 1,150% of Total Nitrogen and about 100% to 1,100% of Total Phosphorous annually. The off-site estimation at the reservoir (entire watershed outlet) showed the annual increase of 40 to 50% for both Total Nitrogen and Total Phosphorous. The on-site effectiveness of filter strips was from 58.0% to 67.9% reduction for Total Nitrogen and 57.7% to 68.2% reduction for Total Phosphorous. The filter strips reduced 28.5% of Total Nitrogen and 29.4% of Total Phosphorous at the watershed outlet.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.11
• /
• pp.64-74
• /
• 1999

A new clock skew optimization for clock routing using link-edge insertion is proposed in this paper. It satisfies the given skew bound and prevent the total wire length from increasing. As the clock skew is the major constraint for high speed synchronous ICs, it must be minimized in order to obtain high performance. But clock skew minimization can increase total wire length, therefore clock routing is performed within the given skew bound which can not induce the malfunction. Clock routing under the specified skew bound can decrease total wire length Not only total wire length and delay time minimization algorithm using merging point relocation method but also clock skew reduction algorithm using link-edge insertion technique between two nodes whose delay difference is large is proposed. The proposed algorithm construct a new clock routing topology which is generalized graph model while previous methods uses only tree-structured routing topology. A new cost function is designed in order to select two nodes which constitute link-edge. Using this cost function, delay difference or clock skew is reduced by connecting two nodes whose delay difference is large and distance difference is short. Furthermore, routing topology construction and wire sizing algorithm is developed to reduce clock delay. The proposed algorithm is implemented in C programming language. From the experimental results, we can get the delay reduction under the given skew bound.

• Journal of the Korean Dietetic Association
• /
• v.4 no.2
• /
• pp.235-244
• /
• 1998

Hand washing is an important component of hygiene program for food handlers. Hands can be a source of direct or indirect contamination of foods with pathogenic microorganisms. In this study, the effectiveness of hand washing methods and the use of 70% alcohol solution against transient skin bacteria was tested in an university foodservice facility. 70% alcohol solution is sprayed for 5 seconds automatically when hands are placed in the dispenser. Samples were taken using swab technique in meat cutting area, vegetable trimming area, and vegetable cutting area: before and after washing hands according to planned methods, and after being sprayed with 70% alcohol solution after washing hands. The bacteriological analysis of total plate counts, coliform, fecal coliform of food handlers' hands was done. Statistical data analysis was completed with Mann-Whitney U test and Kruskal-Wallis model using the SPSS program. The levels of initial contamination of workers' hand were significantly different by the work areas($x^2$=9.156, p<0.01). Workers in the vegetable trimming area had more heavily soiled hands than in the other work areas. Mean of TPC counts and coliform was 8.97×$10^5$ CFU/12.4$cm^2$, 2.93×$10^2$ MPN/12.4$cm^2$ respectively, but fecal coliform was not detected. Transient bacteria were removed from hands after washing and using 70% alcohol solution but were not removed completely. Mean reduction percentage in TPC varied among work areas and ranged from 93.19% to 94.99%, and in coliforms from 97.31% to 100%. A significant difference in TPC was found between before and after hand disinfection (Z=-2.714, p<.01) and between standardized hand washing procedures and un-standardized hand washing procedures(z=-2.301, p<.01). Subjects using the hand sanitizer showed a great elimination of TPC(99.45% reduction), but this effect was valid only after following proper washing procedures. Based on the results, the most effective hand washing method was recommended as the combination of the standardized hand washing procedure with warm-water and use of the 70% alcohol solution. The results can be used to develop hand hygiene programs and training strategies for enhancing hand hygiene practices for food handlers in foodservice operations.

• Journal of Korean Society on Water Environment
• /
• v.36 no.5
• /
• pp.385-391
• /
• 2020

Soil loss is a serious problem frequently caused by local torrential rainfalls due to climate change. In particular, soil loss is occurring in agricultural areas rather than urban areas, and many pollutants are introduced into rivers, causing environmental problems. To reduce soil loss, the Ministry of Environment has designated and managed non-point source management areas. The Jaun-district in Hongcheon-gun, which was designed as a non-point pollution source management area in Gangwon-do, is located in the upper stream of Soyang Lake. Most of the agricultural fields are composed of highland agriculture fields. The highland agricultural fields in the Jaun-district are also composed of large-scale farming areas, and the ditches located near the agricultural fields have been illegally used for farmland. Therefore, the local government in Hongcheon-gun is conducting a project to restore the ditches occupied by agricultural fields. However, an analysis of the amount of soil loss that can be reduced by the restoration of the ditches has not been conducted yet. Thus, the purpose of this study was to analyze the effect of reducing the soil loss from the restoration of the ditches used as agricultural fields in the Jaun-district. The SATEEC L Module was used to analyze the reduction in soil loss by ditch restoration. The SATEEC L Module was constructed to estimate the LS factor using Moore and Burch's method after calculating the slope length using the digital elevation model and the maximum allowable slope length. The LS factor and the USLE formula were used to estimate the amount of soil loss that could be reduced by ditch restoration. The analysis showed that the ditch restoration could reduce about 16.6% of the soil loss in the Jaun-district. The results of this study will contribute to the study of methods to reduce soil loss in non-point pollution management areas.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.34-44
• /
• 2016

This study is an experimental study about a facility for preventing the accumulation of floating debris at a bridge by flooding at a small river. Generally, structures installed at a small river are damaged frequently by floating debris during typhoons or localized rainfall events. On the other hand, there is no method available for preventing such damage. The facilities used in other countries to prevent such damage by the accumulation of floating debris include debris fins, deflectors, and sweeper. Among these facilities, the present study was conducted with a sweeper to investigate the damage-reducing capability through a real-scale accumulation experiment. A sweeper was installed in front of a bridge to bypass floating debris by self-rotation so that the floating debris may not be accumulate at the bridge. A small bridge model was prepared in a real-scale for the real-scale experiment. The accumulation reducing capability was compared through an accumulation experiment before and after the sweeper installation depending on the length of the debris and flow conditions. The result showed that the accumulation rate increased with increasing length of the debris or decreasing flow rate. The installation of a sweeper decreased the debris accumulation rate by a minimum of 55% to a maximum of 88% compared to the case without an installed sweeper. The result of the present study showed that the installation of a sweeper at a small river having a high potential of generating floating debris may help secure the stability of a bridge in the case of floating debris accumulation.

• Journal of Nutrition and Health
• /
• v.5 no.2
• /
• pp.91-103
• /
• 1972

Zinc is one of the essential trace elements in the living organism for growth and health. The first identified metalloenzyme, carbonic anhydrase, is a zinc compound and several others have been described since. Among zinc deficiency syndromes in animals porcine parakeratosis has been successfully treated with zinc supplements, and in man a syndrome of anemia, hypogonadism, hepatosplenomegaly, and dwarfism, prevalent in parts of Iran and Egypt, has been ascribed to lack of zinc in the diet. Dietary zinc excess in the rat is manifested by a hypochromic, microcytic anemia, poor growth, reduction in liver catalase and cytochrome oxidase. The present study is an attempt to delineate the changes of tissue contents of trace elements, especially of iron, copper and zinc in liver and kidneys of the rats. Weanling albino rats, weighing 60 to 80gm. were used in this experiments. The rats were housed in cages with aluminum floors and received feed and distilled water ad libitum. Animals were divided into three groups, control, low zinc diet and high zinc diet groups. The high zinc diet group was subdivided into 0.5% Zn and 0.7%Zn groups. The supplementary copper or iron was added to the high dietary zinc groups. The animals were sacrificed and the tissues were washed several times with deionized water. The wet digested samples were analyzed by Hitachi Model 207 atomic absorption spectro-photometer for the determination of iron, copper and zinc in the liver and kidney. Hemoglobin level in the blood was measured by cyanmethemoglobin method. The results of this study are as follows: 1) All rats fed high zinc diets and low zinc diets gained less weight than control. Weight gain was not improved by the supplementary copper or iron and both. 2) Hemoglobin concentration was decreased significantly in the rats fed high zinc diets and less in the low zinc diet. Supplementary copper and iron to the higher zinc diet appeared to give some improvement of anemia. 3) The iron contents of the liver and kidneys were significantly decreased in the high zinc groups and the reduction was more significantly in the rats receiving higher zinc diet (0.7%). The supplementary copper caused a further depression of liver iron. On the other hand, the iron, added to the high zinc diet lessoned the severity of the decrease in liver iron and caused kidney iron to be maintained almost at the level found in the rats fed by zinc and supplementary copper diet. 4) High zinc diets did not change copper content of the liver and kidney. Supplementary copper elevated the concentration in the liver and kidney and added iron had no effect on the accumulation of copper in the liver and kidneys. 5) The high zinc diets caused marked increases of zinc content in the liver and kidney. Supplementary iron to the high zinc diet caused increases of zinc contents of liver and kidneys.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.12
• /
• pp.197-205
• /
• 2013

In this study, we developed a program of optimizing stand-level carbon stock using a stand-level yield model and the Simulated Annealing (SA) heuristic method to derive a optimized forest treatment solution. The SA is one of the heuristic algorithms that can provide a desirable management solution when dealing with various management purposes. The SA heuristic algorithm applied 'thermal equilibrium test', a thresholds approach to solve the phenomenon that does not find an optimum solution and stays at a local optimum value during the process. We conducted a sensitivity test for the temperature reduction rate, the major parameter of the thermal equilibrium test, to analyze its influence on the objective function value and the total iteration of the optimization process. Using the developed program, three scenarios were compared: a common treatment in forestry (baseline), the optimized solution of maximizing the amount of harvest(alternative 1), and the optimized solution of maximizing the amount of carbon stocks(alternative 2). As the results, we found that the alternative 1 showed provide acceptable solutions for the objectives. From the sensitivity test, we found that the objective function value and the total iteration of the process can be significantly influenced by the temperature reduction rate. The developed program will be practically used for optimizing stand-level carbon stock and developing optimized treatment solutions.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.11
• /
• pp.41-49
• /
• 2021

All application programs, including malware, call the Application Programming Interface (API) upon execution. Recently, using those characteristics, attempts to detect and classify malware based on API Call information have been actively studied. However, datasets containing API Call information require a large amount of computational cost and processing time. In addition, information that does not significantly affect the classification of malware may affect the classification accuracy of the learning model. Therefore, in this paper, we propose a method of extracting a essential feature set after reducing the dimensionality of API Call information by applying various feature selection methods. We used CICAndMal2020, a recently announced Android malware dataset, for the experiment. After extracting the essential feature set through various feature selection methods, Android malware classification was conducted using CNN (Convolutional Neural Network) and the results were analyzed. The results showed that the selected feature set or weight priority varies according to the feature selection methods. And, in the case of binary classification, malware was classified with 97% accuracy even if the feature set was reduced to 15% of the total size. In the case of multiclass classification, an average accuracy of 83% was achieved while reducing the feature set to 8% of the total size.