• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.5
• /
• pp.10-18
• /
• 2011

A new film cooling method to protect the pylon injector from aerodynamic heating for a scramjet combustor is proposed and verified with numerical methods. The conditions for the Mach 8 flight at an altitude of 35km are considered. Air is considered as a coolant. Three-dimensional Navier-Stokes equations with $k-{\omega}$ SST turbulence model are used. A downward injection of coolant from the top of the pylon gives higher cooling effects with less mass flow rate of coolant than the upward coolant injection from bottom of the pylon. Also, the downward injection shows little flow separation due to the favorable pressure gradient and does not disturb the flowfields near pylon injector, which results in reduction of pressure losses.

• ETRI Journal
• /
• v.25 no.2
• /
• pp.109-120
• /
• 2003

Though the airborne laser scanning (ALS) technique is becoming more popular in many applications, horizontal accuracy of points scanned by the ALS is not yet satisfactory when compared with the accuracy achieved for vertical positions. One of the major reasons is the drift that occurs in the inertial measurement unit (IMU) during the scanning. This paper presents an algorithm that adjusts for the error that is introduced mainly by the drift of the IMU that renders systematic differences between strips on the same area. For this, we set up an observation equation for strip-wise adjustments and completed it with tie point and control point coordinates derived from the scanned strips and information from aerial photos. To effectively capture the tie points, we developed a set of procedures that constructs a digital surface model (DSM) with breaklines and then performed feature-based matching on strips resulting in a set of reliable tie points. Solving the observation equations by the least squares method produced a set of affine transformation equations with 6 parameters that we used to transform the strips for adjusting the horizontal error. Experimental results after evaluation of the accuracy showed a root mean squared error (RMSE) of the adjusted strip points of 0.27 m, which is significant considering the RMSE before adjustment was 0.77 m.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.1 no.1
• /
• pp.41-50
• /
• 2014

Gold nanorod's exceptional light to heat transduction is a robust phonomenon that has been extensively verified. The phenomenon is a trait from which many novel applications across disciplines have been proposed. In this investigation, the feasibility of utilizing heat harvested from such photothermal method to combat cancer is presented. Using non-invasive laser methods, an in vivo study is conducted on mouse ear tumors administered with gold nanorods (Au NRs). An emphasis is placed on monitoring the tumor developments after photothermal treatments, over time. The findings reveal significant tumor growth surpression at a threshold laser power of $0.6W/cm^2$ lasting 2 minutes; this energy also brought about dramatic size reduction in treated tumors. Furthermore, the apparent formation of an eschar over the laser treated region indicates extensive hemorrhagic necrosis of the tumor tissue; a phenomenon implicative to the inhibition of angiogenesis.

• Journal of Environmental Science International
• /
• v.24 no.10
• /
• pp.1239-1251
• /
• 2015

Impervious areas have been expanded by urbanization and the natural structure of water circulation has been destroyed. The limits of centralized management for controlling storm water runoff in urban areas have been suggested. Low impact development (LID) technologies have been promoted as a crucial alternative, establishing a connection with city development plans to build green infrastructures in environmentally friendly cities. Thus, the improvement of water circulation and the control of nonpoint source were simulated through XP-SWMM (storm water and wastewater management model for experts) in this study. The application of multiple LID combination practices with permeable pavements, bioretention cells, and gutter filters were observed as reducing the highest runoff volume by up to 70%. The results from four different LID installation scenarios indicated that permeable paving is the most effective method for reducing storm water runoff. The rate of storm water runoff volume reduced as the rainfall duration extended. Based on the simulation results, each LID facility was designed and constructed in the target area. The LID practices in an urban area enable future studies of the analysis of the criteria, suitable capacity, and cost-efficiency, and proper management methods of various LID techniques.

• Journal of the Korean housing association
• /
• v.13 no.2
• /
• pp.73-78
• /
• 2002

Recently, the energy consumption has been sharply increased and the environmental pollution has been serious, resulted in increased use of fossil fuel. These facts are applied to most fields, and are especially important issues in the field of architecture. The energy consumption rate of building is about 30% of all energy consumption, and the rate of residential is about 20% of the rate of building and is increasing gradually. The purpose of this article is firstly to analyse an actual energy consumption rate of model building and compare it with alternative methods, which are applied passive system to, and secondly to suggest an optimal passive method for saving energy. The conclusion of this study is as follows; 1) As compared with the existing house on actual energy consumption rate, 6% in changing orientation to a south, 9% in using double low-e glazing and 23% in shading is decreased. 2) The change of insulation from 50 to 100mm did not show dramatical difference in energy consumption rate. 3) As changed indoor temperature at 2$0^{\circ}C$ in winter and 27$^{\circ}C$ in summer, the rate shows a reduction of 14% compared with the existing condition.

• 유체기계공업학회:학술대회논문집
• /
• 2002.12a
• /
• pp.152-157
• /
• 2002

A cross-flow fan is widely used on many industrial fields: a blower for the general industry, mining industry, automobile and home appliances. The design point of the cross-flow fan is generally chosen by based on the region within low static pressure and high flow rate. It relatively makes high dynamic pressure at low speed because a working fluid passes through an impeller blade twice. However, it has low static pressure efficiency between $30\%$ and $40\%$ because of relative high impact loss. Recently, in the air-conditioning systems, the operating behaviors at the off-design points are highly regarded to broaden the application area for various air-cooling loads. Especially, at the low flow rate, there exists a rapid pressure head reduction, a noise increase and an irregular flow against a rearguider as a scroll of centrifugal fan. Numerical analyses are carried out for cross-flow fan including the impeller, the rearguider and the stabilizer. Numerical domains are discretized by hexahedral cells. Three-dimensional, unsteady governing equations are solved using FVM, SIMPLE algorithm, sliding grid system and standard k-$\epsilon$ turbulence model.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.3
• /
• pp.19-29
• /
• 2010

A marketing model is changed from a customer acquisition to customer retention and it is being moved to a way that enhances the quality of customer interaction to add value to our customers. Such personalization is emerging from this background. The Web site is accelerate the adoption of a personalization, and in contrast to the rapid growth of data, quantitative analytical experience is required. For the automated analysis of large amounts of data and the results must be passed in real time of personalization has been interested in technical problems. A recommendation algorithm is an algorithm for the implementation of personalization, which predict whether the customer preferences and purchasing using the database with new customers interested or likely to purchase. As recommended number of users increases, the algorithm increases recommendation time is the problem. In this paper, to solve this problem, a recommendation system based on clustering and dimensionality reduction is proposed. First, clusters customers with such an orientation, then shrink the dimensions of the relationship between customers to low dimensional space. Because finding neighbors for recommendations is performed at low dimensional space, the computation time is greatly reduced.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.2
• /
• pp.27-34
• /
• 2004

In the injection molding of plastic optical lenses, the molding conditions have critical effects on the quality of the molded lenses. Since there are many molding parameters involved in injection molding process, determination of the molding conditions for lens molding is very important in order to precisely control the surface contours of an optical lens. Therefore this paper presents the application of neural network in suggesting the optimized molding conditions for improving the quality of molded parts based on data of FE Analysis carried out through CAE software, Timon-3D. Suggested model in this paper, which serves to learn from the data of FE Analysis and induce the values for optimized molding conditions. has been implemented for searching the molding conditions without void and with minimized thickness shrinkage at lens center of injection molding optical lens. As the result of this study. we have confirmed that void creation at the inside of lens is primarily determined by mold temperature and thickness shrinkage at center of lens is primarily determined by the parameters such as holding pressure and mold temperature.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1091-1096
• /
• 2011

Currently, the concern about the environment is the issue all over the world, and in particular, carbon emissions of the power plants will not be able to disregard from the respect of generation cost. This paper proposes DR (demand response) as a method of reducing carbon emissions and therefore, carbon emissions cost. There are a number of studies considering DR, and in this paper, the effect of DR is focused on the side of carbon emission reduction effect considering Time-Of-Use (TOU) program, which is one of the most important economic methods in DSM. Demand-price elasticity matrix is used in this paper to model and analyze DR effect. Carbon emissions is calculated by using the carbon emission coefficient provided by IPCC (Intergovernmental Panel on Climate Change), and generator's input-output characteristic coefficients are also used to estimate carbon emission cost as well as the amount of carbon emissions. Case study is conducted on the RBTS IEEE with six buses. For the TOU program, it is assumed that parameters of time period partition consist of three time periods (peak, flat, off-peak time period).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.7
• /
• pp.1661-1666
• /
• 2010

Due to light condition or shadow around camera, acquired image sequence is often degraded by intensity fluctuation. This artifact is called luminance flicker. As the luminance flicker corrupts the performance of motion estimation or object detection, it should be corrected before further processing. In this paper, we analyze the flicker generation model and propose the new algorithm for flicker reduction. The proposed algorithm considers gain and offset parameter separately, and stabilizes the luminance fluctuation based on these parameters. We show the performance of the proposed method by testing on the sequence with artificially added luminance flicker and real sequence with object motion.