• Ocean and Polar Research
• /
• 제26권2호
• /
• pp.323-332
• /
• 2004

This paper concerns about a study on dynamic responses of tracked vehicle on soft cohesive soil. For dynamic analyses of tracked vehicle, two different models were adopted, i.e. a single-body model and a multi-body model. The single-body vehicle model was assumed as a rigid body with 6-dof. The multi-body vehicle was modeled by using a commercial software, RecurDyn-LM. For the both models properties of cohesive soft soil were modeled by means of three relationships: pressure to sinkage, shear displacement to shear stress, and shear displacement to dynamic sinkage. Traveling performances of the two tracked vehicle models were compared through dynamic analyses in time domain.

• Wind and Structures
• /
• 제25권6호
• /
• pp.537-549
• /
• 2017

In this study, the turbulent flow around a bluff body for different wind velocities was investigated numerically by using its two- and three-dimensional models. These models were tested to verify the validity of the simulation by being compared with experimental results which were taken from the literature. Variations of non-dimensional velocities in different positions according to the bluff body height were analysed and illustrated graphically. When the velocity distributions were examined, it was seen that the results of both two- and three-dimensional models agree with the experimental data. It was also seen that the velocities obtained from two-dimensional model matched up with the experimental data from the ground to the top of the bluff body. Particularly, compared to the front part of the bluff body, results of the upper and back part of the bluff body are better. Moreover, after comparing the results from calculations by using different models with experimental data, the effect of multidimensional models on the obtained results have been analysed for different inlet velocities. The calculation results from the two-dimensional (2D) model are in satisfactory agreement with the calculation results of the three-dimensional model (3D) for various flow situations when comparing with the experimental data from the literature even though the 3D model gives better solutions.

• 한국의류학회지
• /
• 제25권7호
• /
• pp.1227-1238
• /
• 2001

This study was based on social comparison theory, and the covariance structure model was designed, connecting sociocultural attitude, multifaceted body image, and clothing behaviour under sociocultural influence. The practical purpose of this study is to identify the effect of sociocultural attitude toward physical appearance on the affective aspect of body images, the cognitive/behavioral aspect of body images and clothing benefits sought, and to examine the age difference in the female adolescents. The results of this were as follows: 1) Sociocultural attitude toward physical appearance had a negative effect directly on the affective aspect of body images, and showed the highest value in the group of high school girls 2) Sociocultural attitude toward physical appearance had a positive influence directly on the cognitive/behavioral aspect of body images, and high school girls'model showed the highest values significantly as well 3) High school girls'model showed the highest value significantly in the effect of the affective aspect of body images on the cognitive/behavioral aspect of body images. However, college group's model didn's show significant value 4) Middle school girls'model showed higher value positively than the other groups in the effect of the cognitive/behavioral aspect of body images on clothing benefits sought, and the high school girls' model showed higher value negatively in the effect of the affective aspect of body images on clothing benefits sought.

• 한국자동차공학회논문집
• /
• 제4권2호
• /
• pp.127-136
• /
• 1996

Dynamic analysis of a three-axle heavy truck is carried out with rigid body model and flexible body model. To see the effects of chassis flexibility, the chassis is modeled as flexible body. The mass matrix, stiffness matrix, and vibration normal modes of the chassis are obtained by a finite element analysis program, and four vibration normal modes are used in the flexible body model. The vehicle model consisting of a frame, a cab, suspensions, an engine, a deck, a seat, and tires, has total 77 degrees of freedom. The result shows that the peaked acceleration in the flexible model is lower than that of the rigid body model.

• 한국컴퓨터그래픽스학회논문지
• /
• 제28권4호
• /
• pp.1-11
• /
• 2022

선형 스키닝 기반 3D 인체 생성 모델 SMPL (Skinned Multi-Person Linear Model)은 1990년대 미국 거주 미국인들 3천 8백여명을 대상으로 만들어진 3D 신체 데이터베이스인 CEASAR 로부터 최적화 기법을 통해 만들어진 가장 널리 쓰이는 통계적인 3D 모델이다. 본 연구는 한국인 체형의 통계적 특성을 보다 정확히 표현하는 SMPL기반의 한국인 체형 3D 모델을 제안한다. 이를 위해 우리는 한국인 여성 2천7백여명의 신체 각 부위의 실측 데이터에 기존 3D SMPL 모델을 피팅하는 비선형 최적화 알고리즘을 개발한다. 이를 사용하여 한국인 3D 신체 데이터베이스를 구축하고, 주성분 분석 방법으로 한국인 체형 기반 매개화된 3D 모델을 개발한다. 본 연구를 통해 제안하는 한국인의 체형적 특징을 가진 블렌드쉐입과 새로운 체형 파라미터는 기존 모델이 표현하는 체형에 비해 한국인 체형 데이터 특성을 잘 반영함을 확인하였다. 뿐만 아니라, 우리의 모델은 SMPL에 비해 신체 실측 데이터에 대한 피팅 정확도를 개선함을 확인하였다. 제안된 모델은 향후 아바타 생성이나 인체 형상 측정 등 다양한 용도로 사용될 수 있다.

• 한국의류학회지
• /
• 제42권5호
• /
• pp.839-854
• /
• 2018

This study (1) explores female consumers' attitudes toward fat people and perceptions about plus-size models, (2) addresses female consumers' responses to models with different body sizes, and (3) examines the effect of plus-size model presence on female consumers' body image. We collected an online questionnaire from a total of 600 female participants in their 20's and 30's. Stimuli included six full-colored photo images of models with thin and plus body sizes (three in each group). Images were captured from the online shopping site of the fashion brand currently providing both average and plus-size clothes. Respondents were randomly assigned one of the groups by model size. Results support the sociocultural perspective that a thin/ideal body of models has a negative influence on female viewers' sociocultural attitudes toward appearance, mood state and body satisfaction. Findings also suggest that exposure to plus-size models can reduce negative media effects on females body image perceptions, regardless of individual body size.

• 감성과학
• /
• 제5권4호
• /
• pp.1-10
• /
• 2002

개인별 신체 특성을 나타내는 가상피팅모델을 이용하여 제공되는 가상 착용 서비스는 웹을 기반으로 한 인터넷 의류 쇼핑의 흥미를 더해준다. 본 연구의 연구자들은 2000년과 2002년에 개발된 미국의 가상피팅모델과 국내에서 개발되었던 가상피팅모델의 개발 기술의 특성과 변화를 분석하였다. 연구결과는 가상피팅모델의 구축을 위해서는 인체의 치수, 형태, 얼굴의 특징들에 관한 정보 입력이 필요하며, 이때 요구되는 정보는 미국과 한국의 사이트에서 차이가 있음을 밝혔다. 미국의 사이트는 정면이나 측면의 실루엣에 대한 정보의 입력이 요구되는 반면 한국의 사이트는 더 많은 인체 치수 관련 정보를 요구하였다. 2000년에 개발되었던 한국의 가상피팅모델은 길고 좁은 프로포션으로 표현되어 사실적인 표현이 부족하였던 반면 2002년 미국에서 개발한 가상피팅모델은 다양한 인종의 특성을 반영하며, 그래픽 기술의 발전으로 사실적으로 표현된 가상피팅모델을 제공하는 것으로 나타났다.

• Journal of information and communication convergence engineering
• /
• 제19권2호
• /
• pp.73-78
• /
• 2021

As interest in beauty has increased, various studies have been conducted, and related companies have considered the anthropometric data handled between humans and interfaces as an important factor. However, owing to the nature of 3D human body scanners used to extract anthropometric data, it is difficult to accurately analyze a user's body shape until a service is provided because the user only scans and extracts data. To solve this problem, the body shape of several users was analyzed, and the collected anthropometric data were obtained using a 3D human body scanner. After processing the extracted data and the anthropometric data, a custom deep learning model was designed, the designed model was learned, and the user's body shape information was predicted to provide a service suitable for the body shape. Through this approach, it is expected that the user's body shape information can be predicted using a 3D human body scanner, based upon which a beauty service can be provide.

• 한국의류산업학회지
• /
• 제17권2호
• /
• pp.278-286
• /
• 2015

Fashion industry has tried to adopt the virtual garment technology to reduce the time and effort spent on sample creation. For garment manufacturers to adopt the virtual garment technology as an alternative to sample creation, 3D avatars that meet the needs of each brand should be developed. Virtual garment softwares that are available in the market provide avatars with standardized body models and allow to modify the size by manually entering size specifications. This study proposed a methodology to develop size specifications for 3D avatars as well as brand-customized production sizes. For this, a man's fashion brand which is using virtual garment technology is selected. And the Size Korea database is used to develop size specification based on the customers' body shape. This study developed regression equations on body size specifications, which in turn proposed a regression model to proportionately change size specifications of 3D fitting-models. Based on the each body size calculated by the regression model, a standard model is created, and the skeleton-skin algorithm is applied to the regression model to obtain the results of size changes. Then, the 3D model sizes are tested for size changes as well as measured, which verifies that the regression model reflects body size changes.

• 복식
• /
• 제65권2호
• /
• pp.157-175
• /
• 2015

The study was aimed to develop a torso-type dress form representing body features of the female fashion models in Korea. To fulfill this purpose, 5 female fashion models aged between 20 and 26 having the average body measurements of professional fashion models in Korea were selected and their 3-D whole body scanned data were analysed. The 3-D whole body scanning method enabled to generate a virtual female fashion model within the CAD system by measuring the subjects' body shapes and sizes. In addition, the virtual model's body data led the development of a standard female fashion model dress form for the efficient fashion show preparation. In order to manufacture the real dress form for female fashion models, 3-D printing technology was adopted. The consequent results are as follows: (1) the body measurements (unit: cm) of the developed dress form were: biacromion length, 36.0, bust point to bust point, 16.6, front/back interscye lengths, 32.0/33.0, neck point to breast point, 26.0, neck point to breast point to waist line, 41.5, waist front/back lengths, 34.5/38.5, waist to hip length, 24.0, bust circumference, 85.0, underbust circumference, 75.0, waist circumference, 65.0, hip circumference, 92.0. (2) the body measurements differences between the developed and existing dress forms were highlighted with the body measurements of neck point to breast point and waist to hip length. (3) the body shape features of the developed dress form showed that bust, shoulder blade, shoulder slope, abdomen and back waist line to hip line parts were more realistically manufactured.