• Journal of Environmental Impact Assessment
• /
• v.15 no.1
• /
• pp.23-33
• /
• 2006

The factor of air pollution in a large industrial city is not only manufactories but also, activities related to trucks. Sihwa National Industrial Complex is located in Siheung City; due to the industries, more diverse activities related to trucks occur in Siheung City than other cities. In particular, the new residential area in Siheung City is close to the industrial complex; so, the damage of this residential area is expected that it would be more serious and vulnerable than other areas. The aim of this study is to analyze influence of the air pollution by a truck in Siheung City. ISCST3 Model and Arc View program were used for this study and Siheung City was divided into 1,000 meter by 1,000 meter grid to analyze. Furthermore, this study suggested two reduction controls of air pollution in Siheung City, and analyzed the results from these reduction managements. The results of the present condition showed that residences located in north of Sihwa Industrial Complex are influenced by air pollution material. Furthermore, air pollution by trucks has affected on the residents which is near the road in Siheung City. Therefore, this study suggested two reduction controls by the Traffic System Management. The first alternative plan is setting the truck traffic limitation zone in the road that is located in south of resident areas and many trucks traffic. Next, the second alternative plan is setting freight truck way on the most traffic road to enter the industrial complex. The reduction effect of the first alternative is good on the residential area. And, the second alternate about freight truck way is divided passenger cars into trucks. Therefore, there are increase of average speed and decrease of average concentration, and spatial reduction effects found in wide areas.

• Journal of Fashion Business
• /
• v.22 no.3
• /
• pp.122-142
• /
• 2018

In the virtual fitting system, the use of a 3D avatar is not a simple garment model, but it should be able to reproduce the size and shape of the customer using a fitting system. Although various virtual fitting systems have their own 3D avatar sizing systems and provide 3D avatars that match the size of the customer, there are limitations in realizing the actual body shape in actual use by the consumer. The purpose of this study is to realize a 3D avatar with excellent size and conformity for customer use. Therefore, this study aims to provide basic data for the formation of a 3D standard avatar of Korean women aged in their 20's, by comparing and analyzing the degree of the consumer user friendly system change of a body type, and the consumer's ability in selecting a consumer representative body type. Based on the survey data of 'Size Korea' conducted from 2004 to 2015 at three times, we examined the change of body shape over 10 years. Then, based on the results of 6th and 7th data, 4 factors of the concurrent body shape change of women of the consumer demographic studied were selected through the use of a factor analysis. Following this analysis, the 4 extracted factors were clustered again and finally released 7 representative body types, which were obtained based on height and weight. The size of each representative figure is derived by the use of a regression analysis, and it is used as a basic data for 3D avatar formation of the virtual fitting system.

• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.296-302
• /
• 2006

The kinetics of the thermal-oxidative decomposition of waste polyurethane (PU) according to oxygen concentration has been studied using a non-isothermal thermogravimetric technique at several heating rates from 10 to $50^{\circ}C/min$. A kinetic model accounting for the effects of the oxygen concentration by the differential and integral method based on Arrhenius equation was proposed to describe the thermal-oxidative decomposition of waste PU. To obtain the information on the kinetic parameters such as activation energy, reaction order, and pre-exponential factor, the thermogravimetric analysis curves and its derivatives have been analyzed using the kinetic analysis method proposed in this work. From this work, it was found that reaction orders for oxygen concentration had a negative sign, and activation energy decreased as the oxygen concentration increased. It was also found that the kinetic parameters obtained from the integral method using the single heating rate experiments varied with heating rates. Therefore, it is thought that the differential method using the multiple heating rate experiments more effectively represents the thermal-oxidative decomposition of waste polyurethane.

• Journal of KIISE:Information Networking
• /
• v.29 no.6
• /
• pp.654-662
• /
• 2002

As the Internet technology becomes a major information infrastructure, an emerging problem is the tremendous increase of malicious computer intrusions. The present Intrusion Detection System (IDS) serves a useful purpose for detecting such intrusions, but the current situation requires more active response mechanism other than simple detection. This paper describes a multi-agent based tracing system against the intruders when the system is attacked. The focus of the study lies on the secure communication mechanism for the agent message communication. We have extended parameters on the KQML protocol, and apt)lied the public key encryption approach, The limitation might be the requirements of two-way authentication for every communication through the broker agent. This model ma)r not improve the efficiency, but it provides a concrete secure communication. Also this is one important factor to protect the agent and the tracing server during the tracing process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.718-725
• /
• 2016

In this study, the plastic flow curve of commercially pure titanium sheet (CP Ti) actively used in the plate heat exchanger etc., was evaluated. The plastic flow curve known as hardening curve is a key factor needed in conducting finite element analyses (FEA) for the forming process of a sheet material. A hydraulic bulge test was performed on the CP Ti sheet and the strain in this test was measured using the DIC method and ARAMIS system. The measured true stress-true strain curve from the hydraulic bulge test (HBT) was compared with that from the tensile test. The measured true stress-true strain curve from the hydraulic bulge test showed stable plastic flow curve over the strain range of 0.7 which cannot be obtained in the case of the uniaxial tensile test. The measured true stress-true strain curve from the hydraulic bulge test can be fitted well by the hardening equation known as the Kim-Tuan model.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.1
• /
• pp.19-30
• /
• 2014

In this study nonlinear FEM analysis for steel pylon base of a cable supported bridge is performed in order to compare the results of Akashi-Kaikyo bridge's design specification established in 1970. Due to convenience of its application, the Akashi grand bridge's design specification has been applied to the base design of cable stayed bridges. It has been using linear spring in order to model prestressed high tensioned bars between steel pylon bottom plates and the base concrete. However, the results of nonlinear FEM analysis revealed that the Akashi-Kaikyo bridge's design specification has various problems in the analysis of the steel pylon base. And the steel pylon base has various complex members connecting with each other, and it is main member to resist against the wind load or the earthquake load. Therefore, the nonlinear FEM analysis has to be conducted in order to predict the behavior of steel pylon base exactly. Also, the nonlinear FEM analysis is more reasonable for the load and resistant factor design.

• Journal of Navigation and Port Research
• /
• v.30 no.8 s.114
• /
• pp.675-683
• /
• 2006

From Quality Management System in early 1990, through Safety Management System in 1998, to Maritime Security System in 2002, the shipping/port industries had no choice but to accept such management systems as occasion demands or compulsory in recent 10 years. Furthermore some companies have introduced other system such as Environment Management System(ISO 14000), Occupational Health & Safety Assesment Series(OHSAS 18000) additionally. But most companies have introduced & implemented the quality, safety & security management system generally. This paper is to suggest the effective measurement & improvement plan of Quality Management System.

• Journal of Digital Convergence
• /
• v.14 no.2
• /
• pp.41-48
• /
• 2016

This paper identifies the factors affecting user satisfaction for the successful application of Smart-education in national defense recently at the national level and suggests the political implications through the empirical research to nurture creative talents globally. The study model was designed by setting the influencing factors on the user satisfaction of smart education. In order to verify the reliability of the measurement item, it was calculating the coefficient Cronbach's ${\alpha}$ and validity was verified by carrying out factor analysis. The empirical results of this doctoral dissertation as a Smart-education, factors affecting user satisfaction, content, management, internal organization, user characteristics, such as classified into five areas detailed factors as independent variables correlation analyzes were carried out factors influencing the most effective impact on training and user satisfactions were tested.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.35-43
• /
• 2017

The minimum reinforcement ratio is an important design factor to prevent a brittle failure in RC flexural members. A minimum reinforcement ratio is presented by assuming an effective depth of cross-section and moment arm lever in CDC and KHBDC. In this study, it suggests that a rational method for minimum reinforcement ratio is calculated by material model and force equilibrium. As results, a minimum reinforcement ratio using a p-r curve in KHBDC is evaluated about 52~80% of recent design code's value and it induces an economical design. And also, a ductility capacity in case of placing this minimum reinforcement amount is evaluated about 89% of recent design code's value, but ductility in a member is 7 or more, so it has a sufficient ductility capacity. Therefore, it is judged that a minimum reinforcement ratio using p-r curve has a theoretical rationality, safety and economy in a flexural member design.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.4
• /
• pp.107-117
• /
• 2011

Smartphones are widely used as a mobile communication devices with more advanced computing ability and connectivity than a contemporary feature phone. As the market expands, many brand-new smartphones are released and chosen by (potential) smartphone users. In spite of smartphone's popularity, little research of the factors affecting the evaluation of smartphones and their influences on smartphone choice have been performed. Therefore, we aim to analyze evaluation factors of smartphone selection and use in this research. We use Fuzzy Analytic Hierarchy Process method, a Multi-Criteria Decision Making (MCDM) model, to find the relative importance among the factors considering the fuzziness of pair-wise comparison using AHP. After reviewing related works and interviewing the focus group, we extract the five independent factors influencing the choice and use of a smartphone. Pair-wise comparison and triangle fuzzy numbers are used to calculate the relative importance of factors. We analyze not only the whole interviewees' responses, but the differences between smartphone users and non-users. Practical implications are delivered in concluding remarks.