• Journal of the korean society of oceanography
• /
• v.32 no.3
• /
• pp.93-102
• /
• 1997

Coastal circulations during the (surface condition of an) idealized cold-air outbreak are numerically investigated with two-dimensional, non-hydrostatic model in which a constant bottom-slope exists. The atmospheric forcing during a cold-air outbreak is incorporated as the surface cooling and the wind stress. When the offshore angle of the wind-stress vector, defined as the angle measured from the alongshore axis, is smaller than 45 degrees, a strong downwelling circulation develops near the coast. A sharp density front, which separates the vertically homogeneous region from the offshore stratified region, is formed near the coast and propagates offshore with time. Onshore side of the density front, small-scale circulation cells which are aligned in the direction perpendicular to the bottom begin to develop as the near-coast homogeneous region broadens. The surface cooling enhances greatly the development of the surface mixed layer by convective motions due to hydrostatic instability. The convective motions reach far below the hydrostatically unstable layer which is attached to the surface. The small-scale circulation cells are appreciably modified by the convetion cell and the density front develops far offshore compared to the case of no surface cooling. As to the effect of the bottom slope, the offshore distance of the density front increases (decreases) as the bottom slope decreases (increases), which results from the fact that the onshore volume-transport (Ekman transport) of the low-density upper seawater remains almost constant when the wind-stress is maintained constant. It is shown that the bottom slope is an essential factor for the formation of both the density front and the alongshore current when the surface cooling is the only forcing.

• Biomolecules & Therapeutics
• /
• v.22 no.1
• /
• pp.27-34
• /
• 2014

Curcumin is naturally occurring polyphenolic compound found in turmeric and has many pharmacological activities. The present study was undertaken to evaluate anti-allergic inflammatory activity of curcumin, and to investigate its inhibitory mechanisms in immunoglobulin E (IgE)/Ag-induced mouse bone marrow-derived mast cells (BMMCs) and in a mouse model of IgE/Ag-mediated passive systemic anaphylaxis (PSA). Curcumin inhibited cyclooxygenase-2 (COX-2) dependent prostaglandin $D_2$ ($PGD_2$) and 5-lipoxygenase (5-LO) dependent leukotriene $C_4$ ($LTC_4$) generation dose-dependently in BMMCs. To probe the mechanism involved, we assessed the effects of curcumin on the phosphorylation of Syk and its downstream signal molecules. Curcumin inhibited intracellular $Ca^{2+}$ influx via phospholipase $C{\gamma}1$ ($PLC{\gamma}1$) activation and the phosphorylation of mitogen-activated protein kinases (MAPKs) and the nuclear factor-${\kappa}B$ (NF-${\kappa}B$) pathway. Furthermore, the oral administration of curcumin significantly attenuated IgE/Ag-induced PSA, as determined by serum $LTC_4$, $PGD_2$, and histamine levels. Taken together, this study shows that curcumin offers a basis for drug development for the treatment of allergic inflammatory diseases.

• Biomolecules & Therapeutics
• /
• v.21 no.4
• /
• pp.313-322
• /
• 2013

Previous studies have demonstrated that repeated administration of the exogenous stress hormone corticosterone (CORT) induces dysregulation in the hypothalamic-pituitary-adrenal (HPA) axis and results in depression and anxiety. The current study sought to verify the impact of catechin (CTN) administration on chronic CORT-induced behavioral alterations using the forced swimming test (FST) and the elevated plus maze (EPM) test. Additionally, the effects of CTN on central noradrenergic systems were examined by observing changes in neuronal tyrosine hydroxylase (TH) immunoreactivity in rat brains. Male rats received 10, 20, or 40 mg/kg CTN (i.p.) 1 h prior to a daily injection of CORT for 21 consecutive days. The activation of the HPA axis in response to the repeated CORT injections was confirmed by measuring serum levels of CORT and the expression of corticotrophin-releasing factor (CRF) in the hypothalamus. Daily CTN administration significantly decreased immobility in the FST, increased open-arm exploration in the EPM test, and significantly blocked increases of TH expression in the locus coeruleus (LC). It also significantly enhanced the total number of line crossing in the open-field test (OFT), while individual differences in locomotor activities between experimental groups were not observed in the OFT. Taken together, these findings indicate that the administration of CTN prior to high-dose exogenous CORT significantly improves helpless behaviors, possibly by modulating the central noradrenergic system in rats. Therefore, CTN may be a useful agent for the treatment or alleviation of the complex symptoms associated with depression and anxiety disorders.

• Journal of the Korean Vacuum Society
• /
• v.14 no.3
• /
• pp.153-158
• /
• 2005

The effective mean free path model was adopted to examine the thickness effect on the thermoelectric properties of flash-evaporated n-type $Bi_2Te_{2.4}Se_{0.6}$ thin films. Annealing effects on the electron concentration and mobility were also studied, and their variations were analyzed in conjunction with antisite defects. Seebeck coefficient and electrical resistivity versus inverse thickness showed a linear relationship, and the mean free path was found to be $5120\AA$ Electron mobility was increased by annealing treatment and electron concentration was decreased considerably due to reduction of antisite defects, so that electrical conductivity was decreased and Seebeck coefficient was increased. When annealed at 473k for 1 hour, Seebeck coefficient and electrical conductivity were $-200\;\mu V/k\;and\;510\omega^{-1}cm^{-1}$, respectively. Therefore, the thermoelectric power factor was improved to be $20\times10^{-4}\;W/(mK^2)$.

• Proceedings of the Korean Society of Veterinary Pathology Conference
• /
• 2002.11a
• /
• pp.132-132
• /
• 2002

Mostly, hypercholesterolemia has been focused on atherosclerosis and coronary heart disease and can be produced by intake of high cholesterol diet. However, toxic effects of cholesterol itself on liver and relationship between intake of high cholesterol diet and hepatic fibrosis have not been clearly investigated. Male Wistar rats were fed diet supplemented with 1.0 ％ cholesterol and 0.3 ％ sodium cholate for 12 weeks. Rats were sacrificed at 0, 3, 6, 9 and 12, respectively. Histopathological and blood chemical studies were performed on these animal sets. Total cholesterol, AST, ALT and LDH levels increased from week 3 and maintained around that level throughout the experiment compared to control. However, TG and albumin levels were the same or lower than those of control. Intake of high cholesterol and sodium cholate diet caused hepatic necrosis, macrophage infiltration, steatosis and fibrosis. Following feeding this diet to rats, hepatic necrosis, macrophage infiltration and steatosis markedly increased throughout the experiment, comparing to control. Collagen deposition and myofibroblasts were detected from at week 9 to 12 in the liver. Mast cell increased in proportion to the degree of hepatic damages. In conclusion, these results suggest that intake of high cholesterol diet is a risk factor on hepatic steatosis and fibrosis as well as atherosclerosis and coronary heart disease. Furthermore, this animal model for hepatic fibrosis can be use for application of anti-fibrogenic agents screening in vivo.

• Journal of Welding and Joining
• /
• v.26 no.2
• /
• pp.85-91
• /
• 2008

In general, the quality of a welding process tends to vary with depending on the work environment or external disturbances. Hence, in order to achieve the desirable quality of welding, we should have the optimal welding condition that is not significantly affected by these changes in the environment or external disturbances. In this study, we used a dual response surface method in consideration of both the mean output variables and the standard deviation in order to optimize the V-groove arc welding process. The input variables for GMA welding process with the dual response surface are welding voltage, welding current and welding speed. The output variables are the welding quality function using the shape factor of bead geometry. First, we performed welding experiment on the interested area according to the central composite design. From the results obtained, we derived the regression model on the mean and standard deviation between the input and output variables of the welding process and then obtained the dual response surface. Finally, using the grid search method, we obtained the input variables that minimize the object function which led to the optimal V-groove arc welding process.

• Korean Journal of Veterinary Research
• /
• v.39 no.4
• /
• pp.838-845
• /
• 1999

To determine the prognostic factors for survival of dogs infected with canine parvovirus, clinical and laboratory data of 35 dogs with clinical signs compatible with canine parvoviral enteritis admitted to the Veterinary Medical Teaching Hospital, Seoul National University during the period 1997-1998 were collected. Dogs were grouped by some major covariates, which can be considered as guides to the relative prognosis of dogs in the different subgroups. The Kaplan-Meier survival analysis and Weibull proportional hazard model were used to estimate overall survival, evaluate the comparability between groups, and identify potential prognostic factors. The overall survival rate for all dogs was 45.7% over the study period, and the Kaplan-Meier estimate of one week survival was 0.4989. Gender was the most favorable prognosis ; male dog (median, 6 days) had significantly higher risk of dying than female dog (median, 17 days ; p = 0.0023). In addition to gender, age was significantly associated with survival, with juvenile dogs less than 6-month-old having higher risk (p = 0.0359). Dogs that vaccinated with complete protocol (p = 0.0374) and those of having higher value of mean corpuscular volume (p = 0.0346) were found to be of prognostic importance. The 7 dogs in which white blood cell count of less than 2000 had shorter median survival time (3 days) than the remaining 28 dogs (8 days), but no statistical significance was found between leukopenic and survival. The distribution of packed cell volume and hemoglobin measurement was such that the overall risk of dying in the two groups was comparable. Further studies are needed to more accurately assess these results.

• Journal of Korean Society on Water Environment
• /
• v.20 no.6
• /
• pp.589-596
• /
• 2004

In this study, the reduction rates of nutrients were suggested to prevent eutrophication on the Hwaong reservoir in the year of 2008 and 2012. With EPA's WASP6 model, future water quality were simulated. In 2008, T-N would be 1.36mg/L and T-P 0.100mg/L on average. ; In 2012, T-N 2.66mg/L and T-P 0.128mg/L. With all the water quality management plans that the government authorities are carrying out, these results indicate that the reservoir would be reach the eutrophic or hypertrophic state according to the Vollenweider's trophic states. Therefore, the Hwaong reservoir requires additional plans for nutrients management. Here, the target water quality to prevent eutrophication of the reservoir sets into mesotrophic state ; T-N 0.475mg/L and T-P 0.02mg/L.(median of Vollenweider index for mesotropphic state) The reduction rates of nutrients on Namyang and Eoeun streams were estimated with uniform treatment method to meet the goal. The results showed that nutrients from two streams should be reduced up to 78% in 2008, and 84% in 2012. Since the ratio of T-N/T-P would be higher than 16 at target years, T-N was not considered as the limiting factor and was not reduced.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.4
• /
• pp.477-493
• /
• 2016

A single process using hot water (0% green liquor) and green liquor (GL) was investigated for pre-pulping extraction on two types of raw material. The GL was applied at different alkali charges of 0-5% on a dry wood weight basis. The extractions were performed at an H-factor 900 at $180^{\circ}C$. The 0% and 3% GL extraction detected acetic acid (AA) at 10.02 and $9.94g/{\ell}$, extracts derived from hardwood, 2.46 and $3.76g/{\ell}$, extracts derived from softwood, respectively. The single liquid-liquid extraction (LLE) was studied using tri-n-alkylphosphine oxide (TAPO). Response surface methodology (RSM) was employed as an efficient approach for predictive model building and optimization of AA recovery conditions. The extraction of AA was evaluated with a three-level factorial design. Three independent variables, pH (0.5-3.5), temperature ($25-65^{\circ}C$), and residence time (24-48 min) were investigated. Applying the RSM models obtained, the optimal conditions selected of extracts derived from hard- and softwood with a 3% GL were approximately pH 1.4, $26.6^{\circ}C$, 43.8 min and approximately pH 0.7, $25.2^{\circ}C$, 24.6 min, respectively. The predicted and experimental values of AA recovery yield were similar whilst sugar retention was 100%.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.6
• /
• pp.603-611
• /
• 2016

Research and development of mineral-resource-related products has progressed with the increased need to develop mineral resources. The DTH hammer is a resultant product. However, owing to particular work conditions of underground drilling, it is difficult to obtain direct data on the DTH hammer. A DTH drill rig requires a significant amount of money and time for actual testing. This thesis aimed to resolve this problem by using CAE. In a previous paper, the structure of the DTH hammer and its movement were analyzed, and a standard model based on simulation was proposed. Then, experimentation and comparison verification were conducted. In this paper, by using an experimental design method, we derived a control factor of the impact force and efficiency of the DTH hammer and attempted to optimize the design. As a result, the impact energy increased by 14.9%, and the efficiency increased by 3.3%.