• Transactions of Materials Processing
• /
• v.26 no.6
• /
• pp.341-347
• /
• 2017

Flexibly-reconfigurable roll forming (FRRF) is a novel sheet metal forming technology conducive to produce multi-curvature surfaces by controlling strain distribution along longitudinal direction. Reconfigurable rollers could be arranged to implement a kind of punch die set. By utilizing these reconfigurable rollers, desired curved surface can be formed. In FRRF process, three-dimensional surface is formed from two-dimensional curve. Thus, it is difficult to predict the forming result. In this study, a regression analysis was suggested to construct a predictive model for a longitudinal curvature of FRRF process. To facilitate investigation, input parameters affecting the longitudinal curvature of FRRF were determined as maximum compression value, curvature radius in the transverse direction, and initial blank width. Three-factor three-level full factorial experimental design was utilized and 27 experiments using FRRF apparatus were performed to obtain sample data of the regression model. Regression analysis was carried out using experimental results as sample data. The model used for regression analysis was a quadratic nonlinear regression model. Determination factor and root mean square root error were calculated to confirm the conformity of this model. Through goodness of fit test, this regression predictive model was verified.

• Water for future
• /
• v.27 no.1
• /
• pp.141-150
• /
• 1994

The purpose of this study is develope the algorithm of channel routing model which can be used for flood forecasting. In routing model, the hydrulic technique of the implicit scheme in the dynamic equation is chosen to route the unsteady varied flow. The channel routing model is connected with conceptual watershed model which is able to compute the flood hydrograph from each subbasin. The comparative study shows that the conceptual model can simulate the watershed runoff accurately. As a result of investigating the channel routing model, the optimal weighting factor $\theta$ which fixes two points between time line is selected. And also, the optimal error tolerance which satisfies computing time and converge of solution is chosen.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.6
• /
• pp.1109-1123
• /
• 2017

This study analyzed a somatotype of teenager's that was suitable to improve the reality of a virtual model size. We analyzed 843 teenagers 12-18 years old from the 6th Size Korea data. First, factor analysis was done for abstracting new criteria and dividing the somatotype; subsequently, we selected the waist height proportion to stature (body proportion) and drop (torso shape). Next, the cluster analysis was done with these criteria; subsequently, 5 body proportion types and 7 torso shapes were distinguished. A virtual model size for 4 somatotype with more than 50 persons was also designed by a regression analysis that constituted sizes for each factor. The designed model size was compared with body size as well as with Clo's virtual model size. The research model showed a high similarity in sizes with body as well as improved reality over the Clo model that presented size problems such as low waist height, bigger bust, and smaller thigh circumference than the real body.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.5
• /
• pp.635-642
• /
• 2011

Hydraulic efficiency was a vital component in evaluating the disinfection capability of clearwell. Current practice evaluates these system based on the tracer test only. In this paper, CFD(Computational Fluid Dynamics) was applied on the clearwell for alternating or supplementing the tracer test. The baffle factor derived from the CFD modeling closely matched the values obtained from full scale tracer testing. And, for suggesting proper numerical model in clearwell; the turbulence model, discretization scheme, convergence criteria were investigated through separate simulation runs. The model validation was conducted by comparing the simulated data with experimental data. In the turbulence model, the realizable ${\kappa}-{\varepsilon}$ model and the standard ${\kappa}-{\varepsilon}$ model were found to be more appropriate than RNG ${\kappa}-{\varepsilon}$ model. The residuals of convergence criteria should be used as not $10^{-3}$ but $10^{-4}$ or $10^{-5}$. In discretization scheme, the difference of simulated values in 1st, 2nd, 3rd upwind scheme was found to be insignificant. Moreover, the result of this study suggest that CFD modeling can be a reliable alternative to tracer testing for evaluating the hydraulic efficiency.

• Journal of Preventive Veterinary Medicine
• /
• v.42 no.4
• /
• pp.143-147
• /
• 2018

The present study aimed to develop growth prediction models of Listeria monocytogenes in processed meat products, such as mixed pressed hams, to perform accurate microbial risk assessments. Considering cold storage temperatures and the amount of time in the stages of consumption after opening, the growth of L. monocytogenes was determined as a function of temperature at 0, 5, 10, and $15^{\circ}C$, and time at 0, 1, 3, 6, 8, 10, 15, 20, 25, and 30 days. Based on the results of these measurements, a Baranyi model using the primary model was developed. The input parameters of the Baranyi equation in the variable temperature for polynomial regression as a secondary model were developed: $SGR=0.1715+0.0199T+0.0012T^2$, $LT=5.5730-0.3215T+0.0051T^2$ with $R^2$ values 0.9972 and 0.9772, respectively. The RMSE (Root mean squared error), $B_f$ (bias factor), and $A_f$ (accuracy factor) on the growth prediction model were determined to be 0.30, 0.72, and 1.50 in SGR (specific growth rate), and 0.10, 0.84, and 1.35 in LT (lag time), respectively. Therefore, the model developed in this study can be used to determine microorganism growth in the stages of consumption of mixed pressed hams and has potential in microbial risk assessments (MRAs).

• The Journal of Industrial Distribution & Business
• /
• v.10 no.10
• /
• pp.35-44
• /
• 2019

Purpose - This study focuses on the continuance intention of O2O fresh agricultural products e-commerce. By literature review, this paper looks through the classical theories which are often applied to study use behavior and continuance intention on the electronic commerce area. Ultimately based on the expectancy theory, Technology acceptance model, success model as well as trust model, a model of the continuance intention of fresh products O2O electronic commerce application is established. Research design, data, and methodology - Among users Chinese consumers have been chosen who have use experience as the research objects. From October 2, 2018 to November 2, 2018, 685 questionnaires in total were collected by the online release and collection. Expect for the negative questionnaires, the remaining 650 pieces of data are statistically analyzed. The collected data were firstly be analyzed by SPSS Ver. 25 on its frequency, reliability and exploratory factors. Then AMOS Ver. 25 is applied to the Confirmatory Factor Analysis, Discriminant Validity and hypothesis testing of the Structural Equation Modeling. Finally, the following research conclusions could be obtained from the hypothesis testing. Results - Firstly, in the extended IS model, quality factor for hypothesis testing, service quality, information quality and delivery quality have obviously present positive influences on satisfaction respectively. Secondly, in the hypothesis testing part of ECM-ISC model and UTAUT model, all hypotheses have presented accepted results. Especially from expectation confirmation to usefulness perception, the influence factor achieves 12.603, In the hypothesis of continuance intention, the influence factor of social influence on continuance intention is 7.748 and also it is the most remarkable one. Conclusions - The results show that the service quality of O2O fresh agricultural products e-commerce has the greatest impact on satisfaction, while the perceived usefulness of consumers has the most significant impact on O2O fresh agricultural products for sustainable use intention. This thesis makes up for the blank of O2O fresh food e-commerce for sustainable use intentions, and provides a theoretical basis for consumers' sustainable use behavior, and practical enlightenment for the sustainable development of O2O fresh agricultural products e-commerce.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.410-415
• /
• 2000

Slip factor is defined as an empirical factor being multiplied to theoretical energy transfer for the estimation of real work input of a centrifugal compressor. Researchers have tried to develop a simple empirical model, for a century, to predict a slip factor. However most these models were developed on the condition of design point assuming inviscid flow. So these models often fail to predict a correct slip factor at off-design condition. In this study, we summarized various slip factor models and compared these models with experimental and numerical data at off-design condition. As a result of this study, Wiesner's and Paeng and Chung's models are applicable for radial impeller, but all the models are not suitable for backswept impeller. Finally, the essential avenues for future study is discussed.

• Culinary science and hospitality research
• /
• v.13 no.2
• /
• pp.22-34
• /
• 2007

We researched the previous study about the restaurant's physical environment and had made up questionnaires. The purpose of this study is to analyze the effect of physical facilities of family restaurants on customers' satisfaction. The result was as follows: First, customers visited with friends or family irrespective of days $2{\sim}3$ times a month. Second, the physical environment factors of family restaurants were interior design, interior, making atmosphere and exterior. Third, it was the interior factor(0.268), making atmosphere factor(0.353) and exterior factor(0.244) that affected customers' satisfaction in family restaurants(p<0.001). $R^2$ change was 0.659 and the regression model was suited to our study(F=56.475). To increase customers' satisfaction, the physical environment of family restaurants needs remodeling in proper time.

• Korean Journal of Health Education and Promotion
• /
• v.24 no.4
• /
• pp.161-179
• /
• 2007

To commonly apply the ${\ulcorner}$Measurement parameter for housewives for rearing-related supports of a husband${\lrcorner}$ in Korea and Japan, the current study conducted to confirm the relationship between recognition of a housewife for rearing-related supports of a husband and mental health after reviewing the appropriateness of the parameter. For the statistical analysis, 829 married Korean women in D city and 1,302 Japanese women in S city having children before entering a school were subjected for the study. For reviewing the appropriateness of the parameter, the simultaneous factor analysis that adopted the structural equation modeling was used. As the result of the analysis, 10 categories of factor structural model comprising the ${\ulcorner}$Recognition of a housewife for rearing-related supports of a husband${\lrcorner}$ resulted with the secondary model which sets of ${\ulcorner}$Recognition for emotional support${\lrcorner}$, ${\ulcorner}$Recognition for instrumental support${\lrcorner}$ and ${\ulcorner}$Recognition for information support${\lrcorner}$ as the primary factor and ${\ulcorner}$Recognition of a housewife for rearing-related supports of a husband${\lrcorner}$ as the secondary factor, and the model was found to be appropriate for the data in Korea and Japan. The result is considered to prove the constructs validity of ${\ulcorner}$Recognition of a housewife for rearing-related supports of a husband${\lrcorner}$ parameter. In addition, the relationship between ${\ulcorner}$Recognition of a housewife for rearing-related supports of a husband${\lrcorner}$ and mental health(GHQ) was reviewed by using multiple indicator model, and found the similarity of Korean and Japanese data. The scores measured by using the above parameter resulted to show high relationship with educational level of housewife, family configuration, and number of children.

• International Commerce and Information Review
• /
• v.13 no.3
• /
• pp.249-274
• /
• 2011

This paper examines agri-food export competitiveness among 4 countries(Korea, USA, Japan, China) based on Porter's Diamond model approach. Korea agri-food competitiveness index is much less than those of other countries. Korea is the lowest ranked among the 4 countries in terms of three determinants(except 1 factor, related and supporting industries) of Porter's Diamond Model: Factor condition, demand condition, firm strategy, structure and rivalry. Korea is assumed to have weak point in the factor condition, demand condition because of low capital and land as well as insufficient investment on the agri-food sector. on the other hand, it seems to have strong factor in consumer condition(demand condition). This paper suggest the following strategies to reinforced the agri-food export sector in Korea. 1) an incentive system for seed development and capital investment, 2) a cluster strategy between agriculture and related industry.