• Journal of the Korean association of regional geographers
• /
• v.2 no.2
• /
• pp.159-171
• /
• 1996

The aim of this study is which factors affect the commercial land values and how they act upon them through distribution of commercial land values by multiple regression analysis in Gwangju city. The major findings of this study are as follows: (1) The changes of commercial land values distribution in $1989{\sim}1996$, We see that the commercial area of higher land values extends following the main arterial road. This is related to urbanization in urban fringe while the decline of commercial land values occurs in city center with long history of commercial region. This is due to unsuitableness in rapid changes of commercial environment because of fragmented lots, old buildings. traffic congestion etc. (2) The regions where commercial land values greatly rose are the west in constructed the new planning city center of Sangmu-dong. and the south west in which is related to the extension of high density apartment and the location of big discount stores. (3) Through the changes in commercial land values distribution map. and road map, topographical map, we know that commercial land values is related to various factors; namely, distance from CBD, convenient traffic, reputation of commercial district, condition of a road, size of supplementary, a degree of commercial land use etc. (4) From the above related factor, six variables are extracted by operational definition. That is the spatial distance from the city center, the walking distance to a stopping place, the road width, the amount of bus traffic, the amount of pedestrian, the number of the shop. (5) Data of seven variables are collected on the highest values point of each Dong. We applicate multiple regression analysis with commercial land values as a dependent variable, extracted six variables as independent variables. (6) As a result of multiple regression on the determinants of commercial land values, the variables which is greatly related to commercial land values are the amount of pedestrain, the spatial distance from city center. We identify that two variables explain variance of the commercial land values by 65%. (7) In order to make clear about not explained 35%. we carry out analysis of residual. In consequence, we see small estimate in downtown area and large estimate in urban fringe. This feature is due to simple core structure of Gwangju city and limits of this regression model.

• Journal of the Korean association of regional geographers
• /
• v.19 no.4
• /
• pp.615-626
• /
• 2013

In this study, spatial patterns of the urban flood vulnerability index in Seoul are examined by considering climate exposure, sensitivity, and adaptability associated with floodings for recent 5 year (2006~2010) period by the smallest administrative unit called Dong. According to the results of correlation analyses based on the IPCC(Intergovernmental Panel on Climate Change)'s vulnerability model, among many variables associated with urban flooding, rainwater tank capacity, 1-day maximum precipitation and flood pumping station capacity have statistically-significant, and relatively-high correlations with the number of flood damage in Seoul. The flood vulnerability map demonstrates that the extensive areas along Anyang and Joongnang streams show relatively high flood vulnerability in Seoul due to high sensitivity. Especially in case of Joongnang stream areas, climatic factors also contribute to the increase of flood vulnerability. At local scales, several Dong areas in Gangdong-gu and Songpa-gu also show high flood vulnerability due to low adaptability, while those in Gangnam-gu do due to high sensibility and climate factor such as extreme rainfall events. These results derived from the flood vulnerability map by Dong unit can be utilized as primary data in establishing the adaptation, management and proactive policies for flooding prevention within the urban areas in more detail.

• Journal of Engineering Education Research
• /
• v.10 no.4
• /
• pp.58-77
• /
• 2007

An evaluation system of teaching is one of authentic assessment tools for improving the quality of higher education. The purpose of this study is to cultivate the class evaluation system in the college of engineering based on the empirical analysis of the results of the class evaluation. Especially, this study investigates the validity evidence using the confirmatory factor analysis of the class evaluation. The data used in this study were acquired from 49,127 student's evaluation responses of 471 courses offered in colleges of natural science and engineering at a university in Korea. The reliabilities are quite good for every construct by producing an index value from 0.92 to 0.98. The results provides a guideline for an appropriate measurement model to report the information, to clarify quality and appropriateness of instrument items, to make recommendations for which items should be left or merged in the revised instrument. A special suggestion for improving student's evaluation of each course is to prepare a well-designed instruction for students explaining why and how to evaluate the course in order to produce reliable and valid results.

• Journal of Environmental Impact Assessment
• /
• v.23 no.5
• /
• pp.337-352
• /
• 2014

The main purposes of this study are to find the causality among residents' loyalty to an environmental festival and its influential factors and, based upon the findings, to explore environmental festivals' developmental vision with special reference to Hampyung Butterfly Festival. Under these aims, this study applies structural equation modeling(SEM). The structural model for SEM analysis is composed of four independent variables which consist of residents' attachment(RA) to their region where its own environmental festival is provided, residents' participational intention(RP) to the festival, the economic effects(EE) of the festival, and the communication(CM) between the residents and the festival providers, one intermediate variable, residents' satisfaction(RS) from the festival, and one final dependent variable, residents' loyalty(RL) to the festival. The causality among these variables is hypothesized as follows; Among the independent variables, RP, EE, and CM have effects only on RS and RA has an effect on both RS and RL. And RS has an effect on RL. The facts found from the SEM are summed up as follows; First, (1) RP and CM turn out to have statistically significant effects on RS, (2) RA is confirmed to have a statistically very significant effect on both RS and RL, and (3) RS is also proved to show a statistically very significant effect on RL. Second, the total effects on RL of independent variables are stronger in the order of RA, CM, and RP. Third, EE seems to have no effect on RS, consequently no effect on RL, either. The reason why EE has no effect looks like to be due to environmental festivals' peculiar features. These findings offer the following suggestions for the future of environmental festivals in the part of festival providers. Firstly, to be successful in the festival, they have to provoke RL above all. Second, to do so, they need to encourage RA, CM, and RP in the mentioned order in the long run. Third, but for a short period, they had better concentrate upon promoting RS.

• Applied Chemistry for Engineering
• /
• v.25 no.6
• /
• pp.632-638
• /
• 2014

Batch adsorption studies including equilibrium, kinetics and thermodynamic parameters for the adsorption of new fuchsin dye using granular activated carbon were investigated with varying the operating variables such as initial concentration, contact time and temperature. Equilibrium adsorption data were fitted into Langmuir, Freundlich, Dubinin-Radushkevich and Temkin isotherms. Adsorption equilibrium was mostly well described by Langmuir Isotherm. From the estimated separation factor of Langmuir ($R_L$ = 0.023), and Freundlich (1/n = 0.198), this process could be employed as an effective treatment for the adsorption of new fuchsin dye. Also based on the adsorption energy (E = 0.002 kJ/mol) from Dubinin-Radushkevich isotherm and the adsorption heat constant (B = 1.920 J/mol) from Temkin isotherm, this adsorption is physical adsorption. From kinetic experiments, the adsorption reaction processes were confirmed following the pseudo second order model with good correlation. The intraparticle diffusion was a rate controlling step. Thermodynamic parameters including changes of free energy, enthalpy, and entropy were also calculated to predict the nature of adsorption. The change of enthalpy (92.49 kJ/mol) and activation energy (11.79 kJ/mol) indicated the endothermic nature of adsorption processes. The change of entropy (313.7 J/mol K) showed an increasing disorder in the adsorption process. The change of free energy found that the spontaneity of process increased with increasing the adsorption temperature.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2219-2231
• /
• 2012

This study conducted to investigate incidence rate and association of serum lipid profiles with incidence of ischemic heart disease. Study subjects consisted of 417,642 adults aged 30 years and over, who underwent physical examination and responded to questionnaire from health examination center of 19 university general hospitals. Hazard ratio of risk factor for ischemic heart disease (IHD) were calculated by Cox's proportional hazard regression model adjusted for ages, BMI and lifestyle (drinking, smoking and exercising). For TC/HDL ratio, hazard ratio of IHD in male increased from 1.21 times to 1.84 times increase with TC/HDL ratio, and that in female also increased from 1.26 times to 1.86 times. For TG/HDL ratio, hazard ratio of IHD in male increased from 1.17 times to 1.49 times increase with TG/HDL ratio, and that in female also increased from 1.42 times to 1.97 times. For LDL/HDL ratio, hazard ratio of IHD in male increased from 1.26 times to 1.82 times increase with LDL/HDL ratio, and that in female also increased from 1.26 times to 1.68 times. In conclusion serum lipid indexes are the significant risk factors for cardiovascular diseases. The higher the concentration of TC, LDL and TG is, the lower the concentration of HDL is, hazard ratio for IHD increased. Ratio of TC/HDL, TG/HDL and LDL/HDL were also verified to be significant risk factors for IHD.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.129-136
• /
• 2018

The estimation of the fatigue design life for large welded structures is usually performed using the liner cumulative damage method such as Palmgren-Miner rule or the equivalent damage method. When a fatigue crack is detected in a welded steel structure, the residual service life has to be estimated base on S-N curve method and liner elastic fracture mechanics. In this study, to examine the 3D fatigue crack behavior and estimate the fatigue life of out-of-plane gusset fillet welded joint, the fatigue tests were carried out on the model specimens. Investigations of three-dimensional fatigue crack propagation on gusset welded joint was used the finite element analysis of FEMAP with NX NASTRAN and FRANC3D. Fatigue crack growth analysis was carried out to demonstrate the effects of aspect ratio, initial crack length and stress ratio on out-of-plane gusset welded joints. In addition, the crack behaviors of fatigue tests were compared with those of the 3D crack propagation analysis in terms of changes in crack length and aspect ratio. From this analysis result, SIFs behaviors and crack propagation rate of gusset welded joint were shown to be similar fatigue test results and the fatigue life can also be predicted.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.184-197
• /
• 2008

This study was to investigate the influence of combining composite resins with different elastic modulus, and occlusal loading condition on the stress distribution of restored notch-shaped non-carious cervical lesion using 3D finite element (FE) analysis. The extracted maxillary second premolar was scanned serially with Micro-CT. The 3D images were processed by 3D-DOCTOR. ANSYS was used to mesh and analyze 3D FE model. A notch-shaped cavity was modeled and filled with hybrid, flowable resin or a combination of both. After restoration, a static load of 500N was applied in a point-load condition at buccal cusp and palatal cusp. The stress data were analyzed using analysis of principal stress. Results showed that combining method such that apex was restored by material with high elastic modulus and the occlusal and cervical cavosurface margin by small amount of material with low elastic modulus was the most profitable method in the view of tensile stress that was considered as the dominant factor jeopardizing the restoration durability and promoting the lesion progression.

• Journal of KIISE:Information Networking
• /
• v.32 no.3
• /
• pp.370-381
• /
• 2005

Mobile IP provides an efficient and scalable mechanism for host mobility within the Internet. Using Mobile If, mobile nodes may change their point of attachment to the Internet without changing their If address. However, it would result in a high signaling cost. To reduce the signaling cost, we factor in the fact that mobile users will not be actively communicating much of the time. In fact, there Is no necessity to send a binding update message to the home agent when an mobile node does not communicates with others while moving. From this point of view, we propose a lazy update strategy for minimizing signaling cost using the forwarding pointer in hierarchical Mobile IPv6. In our proposal, binding updates are sent only when a mobile node is in a busy mode. If an mobile node is in a dormant mode, binding update messages are delayed until busy mode using the forwarding pointer. As a result, our proposal can reduce the total signaling cost by eliminating unnecessary binding update messages when a mobile node Is in a dormant mode. In addition to, our proposal reduces unnecessary location update cost resulting from ping-pong effect under mobile node's dormant mode. Analysis results using the discrete analytic model presented in this paper shows that our proposal can has superior performance than hierarchical Mobile nv6 when the call-to-mobility ratio is low and the length of the forwarding pointer chain K is low.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2009.02a
• /
• pp.49-57
• /
• 2009

The cloning of canids was succeeded in 2005, several years after the birth of Dolly the sheep and also after the cloning of numerous other laboratory and farm animal species. The delay of successful somatic cell nuclear transfer (SCNT)was due to the unique reproductive characteristics of the female dogin comparison to other domestic mammals, such as ovulation of immature canine oocyte and a requirement of 25 days for the completion of meiosis within the oviduct (Holst & Phemister, 1971). When the technology for the recovery of in vivo matured oocyte was established, the application of cloning also became possible and cloned dog offspring were obtained. This report summarizes the progress of technical procedures that are required for cloning canids and the application of this technique. The first cloned dog, Snuppy, was achieved using an in vivo-matured oocyte which was enucleated and transferred with an adult skin cell of male Afghan hound. After establishment of a criterion of well-matured oocyte for the improvement of SCNT efficiency, we obtained three cloned female Afghan hound and a toy poodle cloned from 14 year-old aged Poodle using SCNT through this factor. To date, cloned dogs appeared to be normal and those that have reached puberty have been confirmed to be fertile. Through application of canine SCNT technique, first, we demonstrated that SNCT is useful for conserving the breed of endangered animal from extinction through cloning of endangered gray wolves using inter-species SCNT and keeping the pure pedigree through the cloning of Sapsaree, a Korean natural monument. Secondly, we showed possibility of human disease model cloned dog and transgenic cloned dog production through cloning of red fluorescent protein expressing dog. Finally, SCNT can be used for the propagation of valuable genotypes for making elite seed stock and pet dog. In summary, dog cloning is a reproducible technique that offers the opportunity to preserve valuable genetics and a potential step towards the production of gene targeted transgenic cloned dogs for the study of human diseases.