• Title/Summary/Keyword: model factor

Search Result 11,942, Processing Time 0.052 seconds

A Case Study of Decreasing Environment Pollution Caused by Energy Consumption of a Dormitory Building Which Only Using Electricity by Efficiently Simulating Applying Residential SOFC (Solid Oxide Fuel Cell)

  • Chang, Han;Lee, In-Hee
    • Architectural research
    • /
    • v.21 no.1
    • /
    • pp.21-29
    • /
    • 2019
  • Recent years in Korea, some new developed buildings are only using electricity as power for heating, cooling, bathing and even cooking which means except electricity, there is no natural gas or other kinds of energy used in such kind of building. In vehicle industry area, scientists already invented electric vehicle as an environment friendly vehicle; after that, in architecture design and construction field, buildings only using electricity appeared; the curiosity of the environment impact of energy consumption by such kind of building lead me to do this research. In general, electricity is known as a clean energy resource reasoned by it is noncombustible energy resource; however, although there is no environmental pollution by using electricity, electricity generation procedure in power plant may cause huge amount of environment pollution; especially, electricity generation from combusting coal in power plant could emit enormous air pollutants to the air. In this research, the yearly amount of air pollution by energy using under traditional way in research target building that is using natural gas for heating, bathing and cooking and electricity for lighting, equipment and cooling is compared with yearly amount of air pollution by only using electricity as power in the building; result shows that building that only uses electricity emits much more air pollutants than uses electricity and natural gas together in the building. According to the amount of air pollutants comparison result between two different energy application types in the building, residential SOFC (Solid oxide fuel cell) is simulated to apply in this building for decreasing environment pollution of the building; furthermore, high load factor could lead high efficiency of SOFC, in the scenario of simulating applying SOFC in the building, SOFC is shared by two or three households in spring and autumn to increase efficiency of the SOFC. In sum, this research is trying to demonstrate electricity is a conditioned environment friendly energy resource; in the meanwhile, SOFC is simulated efficiently applying in the building only using electricity as power to decrease the large amount of air pollutants by energy using in the building. Energy consumption of the building is analyzed by calibrated commercial software Design Builder; the calibrated mathematical model of SOFC is referred from other researcher's study.

The Effects of Reducing Skin Wrinkles and Improving Skin Elasticity from Korean Radish Extract

  • Kim, Hyun-Kyoung
    • International journal of advanced smart convergence
    • /
    • v.8 no.1
    • /
    • pp.113-125
    • /
    • 2019
  • The radish skin and radish greens are an edible part of the radish. But they are removed before eating the radish and used as a byproduct or an animal feed material because of their tough and rough texture. This study was conducted to investigate the effect of supercritical heat-treated radish-extract on UV-induced HRM-2 wrinkled mouse animal model on anti-aging wrinkles. Supercritical heat-treated radish-extract was applied on the back of seven-weeks old HRM-2 mice. The effect of HRE on skin thickness, elasticity and wrinkle formation of the mice was observed by using UVB lamp to induce melanogenesis and wrinkle formation. As the result, increased depth of wrinkles was observed in the negative control group in comparison to the normal group. In contrast, decreased depth of wrinkles was observed in the radish-extract-free group compared to the negative control group. In the study of the effect of radish-extract on wrinkle-formation related gene expression and protein what protein expression, MMP-2 and MMP-9 gene expression significantly increased in the negative control group compared to the normal group. The gene expression reduced in dependence to the mass of radish-extract treated. Similar to quantitative results of mRNA expression, the expression of MMP-2 protein increased as a result of UVB-irradiation. The MMP-2 expression was inhibited in dependence to the mass of radish-extract treated. In conclusion, the supercritical heat-treated radish-extract has an effect on improving skin wrinkles not only when it is applied to the skin but also when orally ingested. Thus, it can be effectively used as a composition to health functional products. Therefore we can also conclude that radish a food that does not show any side-effects even upon long-term intake can reduce wrinkle formation as well as improve skin elasticity when taken regularly for a long period.

Factors Affecting Breast Self-examination Behavior Among Female Healthcare Workers in Iran: The Role of Social Support Theory

  • Bashirian, Saeed;Barati, Majid;Shoar, Leila Moaddab;Mohammadi, Younes;Dogonchi, Mitra
    • Journal of Preventive Medicine and Public Health
    • /
    • v.52 no.4
    • /
    • pp.224-233
    • /
    • 2019
  • Objectives: In women, breast cancer is the most common cancer and the leading cause of cancer death. Screening tests are the basis for early diagnosis. In Iranian women, the mortality rate of breast cancer is high due to insufficient screening examinations and delayed visits for care. Therefore, this study aimed to determine the factors affecting breast self-examinations among Iranian women employed in medical careers. Methods: This cross-sectional study included 501 women working in the medical professions at Hamadan University of Medical Sciences in western Iran in 2018. The subjects were selected by stratified random sampling. Data were collected using a researcher-developed, self-report questionnaire that contained demographic information and questions based on protection motivation theory and social support theory. Descriptive data analysis was conducted using SPSS version 23 and model fitting with PLS version 2. Results: The mean age of the participants was $37.1{\pm}8.3years$, and most of the women (80.4%) were married. Most women had a bachelor's degree (67.5%). The findings of this study showed that the coping appraisal construct was a predictor of protection motivation (${\beta}=0.380$, p<0.05), and protection motivation (${\beta}=0.604$, p<0.05) was a predictor of breast self-examination behavior. Additionally, social support theory (${\beta}=0.202$, p<0.05) had a significant positive effect on breast self-examination behavior. Conclusions: The frequency of practicing self-examinations among women employees in the medical sector was low; considering the influence of social support as a factor promoting screening, it is necessary to pay attention to influential people in women's lives when designing educational interventions.

Decontamination methods to restore the biocompatibility of contaminated titanium surfaces

  • Jin, Seong-Ho;Lee, Eun-Mi;Park, Jun-Beom;Kim, Kack-Kyun;Ko, Youngkyung
    • Journal of Periodontal and Implant Science
    • /
    • v.49 no.3
    • /
    • pp.193-204
    • /
    • 2019
  • Purpose: The reaction of cells to a titanium implant depends on the surface characteristics of the implant which are affected by decontamination. The aim of this study was to evaluate the cytocompatibility of titanium disks treated with various decontamination methods, using salivary bacterial contamination with dental pellicle formation as an in vitro model. Methods: Sand-blasted and acid-etched (SA) titanium disks were used. Three control groups (pristine SA disks [SA group]; salivary pellicle-coated SA disks [pellicle group]; and biofilm-coated, untreated SA disks [NT group]) were not subjected to any decontamination treatments. Decontamination of the biofilm-coated disks was performed by 14 methods, including ultrasonic instruments, rotating instruments, an air-powder abrasive system, a laser, and chemical agents. MG63 cells were cultured in the presence of the treated disks. Cell proliferation assays were performed on days 2 and 5 of cell culture, and cell morphology was analyzed by immunofluorescence and scanning electron microscopy (SEM). A vascular endothelial growth factor (VEGF) assay was performed on day 5 of culture. Results: The cell proliferation assay revealed that all decontaminated disks, except for the 2 groups treated using a plastic tip, showed significantly less cell proliferation than the SA group. The immunofluorescence and SEM analyses revealed that most groups showed comparable cell density, with the exception of the NT group, in which the cell density was lower and bacterial residue was observed. Furthermore, the cells grown with tetracycline-treated titanium disks showed significantly lower VEGF production than those in the SA group. Conclusions: None of the decontamination methods resulted in cytocompatibility similar to that of pristine SA titanium. However, many methods caused improvement in the biocompatibility of the titanium disks in comparison with the biofilm-coated, untreated titanium disks. This suggests that decontamination is indispensable for the treatment of peri-implantitis, even if the original biocompatibility cannot be restored.

Performance of a 3D pendulum tuned mass damper in offshore wind turbines under multiple hazards and system variations

  • Sun, Chao;Jahangiri, Vahid;Sun, Hui
    • Smart Structures and Systems
    • /
    • v.24 no.1
    • /
    • pp.53-65
    • /
    • 2019
  • Misaligned wind-wave and seismic loading render offshore wind turbines suffering from excessive bi-directional vibration. However, most of existing research in this field focused on unidirectional vibration mitigation, which is insufficient for research and real application. Based on the authors' previous work (Sun and Jahangiri 2018), the present study uses a three dimensional pendulum tuned mass damper (3d-PTMD) to mitigate the nacelle structural response in the fore-aft and side-side directions under wind, wave and near-fault ground motions. An analytical model of the offshore wind turbine coupled with the 3d-PTMD is established wherein the interaction between the blades and the tower is modelled. Aerodynamic loading is computed using the Blade Element Momentum (BEM) method where the Prandtl's tip loss factor and the Glauert correction are considered. Wave loading is computed using Morison equation in collaboration with the strip theory. Performance of the 3d-PTMD is examined on a National Renewable Energy Lab (NREL) monopile 5 MW baseline wind turbine under misaligned wind-wave and near-fault ground motions. The robustness of the mitigation performance of the 3d-PTMD under system variations is studied. Dual linear TMDs are used for comparison. Research results show that the 3d-PTMD responds more rapidly and provides better mitigation of the bi-directional response caused by misaligned wind, wave and near-fault ground motions. Under system variations, the 3d-PTMD is found to be more robust than the dual linear TMDs to overcome the detuning effect. Moreover, the 3d-PTMD with a mass ratio of 2% can mitigate the short-term fatigue damage of the offshore wind turbine tower by up to 90%.

Optimized Production of Poly(γ-Glutamic acid) By Bacillus sp. FBL-2 through Response Surface Methodology Using Central Composite Design

  • Min, Ju-Hee;Reddy, Lebaka Veeranjaneya;Charalampopoulos, Dimitris;Kim, Young-Min;Wee, Young-Jung
    • Journal of Microbiology and Biotechnology
    • /
    • v.29 no.7
    • /
    • pp.1061-1070
    • /
    • 2019
  • In the present study, the optimization of poly(${\gamma}$-glutamic acid) (${\gamma}$-PGA) production by Bacillus sp. FBL-2 was studied using a statistical approach. One-factor-at-a-time method was used to investigate the effect of carbon sources and nitrogen sources on ${\gamma}$-PGA production and was utilized to select the most significant nutrients affecting the yield of ${\gamma}$-PGA. After identifying effective nutrients, response surface methodology with central composite design (CCD) was used to obtain a mathematical model to identify the optimum concentrations of the key nutrients (sucrose, $\text\tiny{L}$-glutamic acid, yeast extract, and citric acid) for improvement of ${\gamma}$-PGA production. The optimum amount of significant medium components appeared to be sucrose 51.73 g/l, $\text\tiny{L}$-glutamic acid 105.30 g/l, yeast extract 13.25 g/l, and citric acid 10.04 g/l. The optimized medium was validated experimentally, and ${\gamma}$-PGA production increased significantly from 3.59 g/l (0.33 g/l/h) to 44.04 g/l (3.67 g/l/h) when strain FBL-2 was cultivated under the optimal medium developed by the statistical approach, as compared to non-optimized medium.

The Effect of Make-up Artist Experiences on Brand Loyalty through Mediation of Trust and Brand Satisfaction (메이크업 아티스트 체험이 신뢰와 브랜드 만족을 매개로 브랜드 충성도에 미치는 영향)

  • Sin, Hyang Soo;Rhee, Young Sun
    • Fashion & Textile Research Journal
    • /
    • v.21 no.3
    • /
    • pp.346-355
    • /
    • 2019
  • This study aimed to determine the factors of the make-up artist experience and establish their effects on brand loyalty through the mediation of trust and brand satisfaction. The step of first surveyed the make-up artist experience level through precedent research and made concept frame of study. The step of second checked up the effects of make-up artist experience through the desires for change. The step of third established to the effects of brand loyalty through make-up artist experience brand through mediation of make-up artist trust and brand satisfaction. The survey was carried out on 440 women aged 20 to 40 who experienced make-up services in Seoul, Gyeonggi-do, Sejong and Daejeon. The data were analyzed using SPSS 23.0, and AMOS 18.0 using frequency analysis, factor analysis, reliability analysis, structural model analysis and t-tests. 1)Make-up artist experiences were divided into informational/ relational experiences and emotional experiences. 2)Desires for change influenced positive effects about information/relational experience and emotional experience. 3)The information/relation experiences influenced positive effects about artist trust and brand satisfaction. 4)The emotional experiences influenced positive effects about make-up artist trust and brand satisfaction. 5) The make-up artist trust influenced positive effects about brand satisfaction. Trust in the make-up artist did not directly influence brand loyalty, but influenced it through satisfaction. 6)The brand satisfaction influenced positive effects about brand loyalty. This study identified the roles of make-up artist and the importance of the make-up experience.

Numerical Study on Optimization of Bulb Type Twisted Rudder for KCS (KCS용 벌브형 비대칭 타의 최적화에 대한 수치적 성능 연구)

  • Kim, Myoung-Gil;Kim, Moon-Chan;Shin, Yong-Jin;Kang, Jin-Gu
    • Journal of Ocean Engineering and Technology
    • /
    • v.32 no.6
    • /
    • pp.419-426
    • /
    • 2018
  • Recently, in an effort to reduce the energy efficiency design index (EEDI), studies on energy saving devices (ESDs) have been conducted. In this study, we designed a post-device suitable for a KRISO container ship (KCS) using computational fluid dynamics (CFD). In order to increase the efficiency of the post-device, a twisted rudder was used, which has a proven performance (showing a 1.34% reduction in DHP compared to the bare hull at 24 knots) in previous research at Pusan National University. In addition, an increase in efficiency was expected by the use of a rudder bulb, including the discontinuous section of the twisted rudder and a divergent propeller cap to prevent the contraction of the wake. The optimization criterion was the case where the delivery power was the least compared with the bare hull. We analyzed the cause of the efficiency increase through an analysis of the self-propulsion factor. The case study for optimization was divided into 4 types (1. clearance of the bulb and cap, 2. shape of the bulb, 3. size of the bulb and cap, and 4. asymmetric bulb). Finally, with a clearance of 50 mm from the ship, a spherical bulb with the cap having an angle of $5^{\circ}$, and an asymmetric rudder bulb with a bulb diameter of 1.2HH/1.4H (horizontal/vertical) showed a 2.05% reduction in DHP compared to the bare hull at 24 knots. We will fabricate a post-device that will be optimized in the future and verify the performance of the post-device through model tests.

Beneficial effects of andrographolide in a rat model of autoimmune myocarditis and its effects on PI3K/Akt pathway

  • Zhang, Qi;Hu, Li-qun;Li, Hong-qi;Wu, Jun;Bian, Na-na;Yan, Guang
    • The Korean Journal of Physiology and Pharmacology
    • /
    • v.23 no.2
    • /
    • pp.103-111
    • /
    • 2019
  • The study is to investigate effects of andrographolide on experimental autoimmune myocarditis (EAM). Lewis rats were immunized on day 0 with porcine cardiac myosin to establish EAM. The EAM rats were treated with either andrographolide (25, 50, 100 mg/kg/day) or vehicle for 21 days. An antigen-specific splenocytes proliferation assay was performed by using the cells from control rats immunized with cardiac myosin. Survival rates, myocardial pathology and myocardial functional parameters (left ventricle end-diastolic pressure, ${\pm}dP/dt$ and left ventricular internal dimension) of EAM rats received andrographolide were significantly improved. Andrographolide treatment caused an decrease in the infiltration of $CD3^+$ and $CD14^+$ positive cells in myocardial tissue. Moreover, andrographolide treatment caused a reduction in the plasma levels of tumor necrosis factor-alpha, interleukin-17 (IL-17) and myosin-antibody, and an increase in the level of IL-10 in EAM rats. Oral administration of andrographolide resulted in the decreased expression of p-PI3K, p-Akt without any change of PI3K and Akt. Further results indicate andrographolide significantly inhibited myosin-induced proliferation in splenocytes, and this effect was inhibited by co-treatment of SC79 (Akt activator). Our data indicate andrographolide inhibits development of EAM, and this beneficial effect may be due to powerful anti-inflammatory activity and inhibitory effect on PI3K/Akt pathway.

Relationship between socioeconomic status and periodontal disease using Structural Equation Modeling (구조방정식 모델을 이용한 사회경제적 수준과 치주질환과의 연관성)

  • Hwang, Su-Yeon;Yang, Jin-Young;Kim, Ki-Eun
    • Journal of Korean society of Dental Hygiene
    • /
    • v.18 no.6
    • /
    • pp.979-986
    • /
    • 2018
  • Objectives: The purpose of this study was to investigate the relationship between socioeconomic status and periodontal disease. Methods: The data used for the analysis were obtained from the sixth Korean National Health and Nutrition Examination Survey (2015). A total of 5,632 adults, aged over 19 years, were included in the study. This study analyzed data relating to socioeconomic status and health behaviors. The socioeconomic status was defined as an exogenous factor. Periodontal disease was the endogenous variable. Health behavior was a mediating variable. The study hypotheses were tested using Structural Equation Modeling analysis with Mplus 7.0 software. Results: According to the model fit test, the associated root-mean-square error was 0.05 (90% CI: 0.046-0.059); comparative fit index was 0.93; Tucker-Lewis index was 0.88; and standardized root-mean-square residual was 0.03. We found that socioeconomic status had significant effects on health behaviors (${\beta}=0.304$, p<0.001) and periodontal disease (${\beta}=-0.289$, p=0.001). Moreover, health behaviors had significant effects on periodontal diseases (${\beta}=0.143$, p<0.001). The analysis of a possible relationship between socioeconomic status and periodontal disease using path analysis demonstrated health behaviors difficulties, along with direct and indirect effects, further increased the risk of periodontal disease. Conclusions: The findings suggest that future interventions for the prevention of periodontal disease should consider health behavior.