• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.3
• /
• pp.191-199
• /
• 2021

The study examines the causal relationship between financial development and economic growth through trade openness for the leading ASEAN countries (Indonesia, the Philippines, Malaysia, Singapore, Thailand, and Vietnam). The study employs a panel data for the period of 25 years spanning from 1995 to 2015 for the six countries, yielding a balanced panel of 150 observations. Fixed effect model (FEM) and random effect model (REM) are used for the panel data, following the Hausman test performed for model selection. The trivariate Granger causality test is also used to check for possible relationship between the variables. The results show that REM is chosen based on the Hausman test result, suggesting that the trade openness has a positive association with growth whereas the financial development is positively, but insignificantly associated with growth. The reason for this is that the financial development and economic growth may be related to each other. The results are, then, further explored and confirmed by the causality test. That is, the financial development and the economic growth, through the trade openness, are found to have bidirectional positive relationships. This implies that there would be shortcomings when ignoring the presence of trade openness, which positively impacts the relationship between finance and growth.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.12 no.4
• /
• pp.2090-2123
• /
• 1970

This paper is a report on the research of experimental model test of Andong Fill Dam, which has been planned by the Government of Korea as a project, of its over-flowing capacity in spillway, creation of minus pressure and structure of anti-water impulse in over-flow weir. Andong Fill Dam is one of the project of master development plant for water resources, locating at Nakdong River side of Korea, and is aimed to have a multi-purpose dam for flood-control, irrigation, water power, urban and industrial water supply. This dam is planned to erect in fill-dam type due to the improper soil foundation and condition for concrete dam. The refore for the proper and advantageous points, this is designed as center core fill dam. By a model minimized of Andong Fill Dam, held an experimental model test on water quentity of reservir, discharges of overflow part, low pressure and anti-water impulse of overflow part, which was conducted an experiment by flowing aspects through each section of spillway to find the changes of water pressure and that of water level, and corrected the section of each part in order to conduct a check on the creation of minus pressure not to be over acted to the allowable bundary of the section structure; and for the prevention of concentated scouring at the down stream side of flow.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.5
• /
• pp.86-98
• /
• 2021

In this study, we developed a simulation model for supply chain management of Precast Concrete (PC) based construction. To this end, information on the Factory Production/Site Construction system was collected through literature review and field research, and based on this information, a simulation model was defined by describing the supply chain, entities, resources, and processes. Next, using the Arena simulation software, a simulation model for the PC supply chain was developed by setting model frameworks, data modules, flowchart modules, and animation modules. Finally, verification and validation were performed using five review methodologies such as model check, animation check, extreme value test, average value test, and actual case test to the developed model. As a result, it was found that the model adequately represented the flows and characteristics of the PC supply chain without any logical errors and provided accurate performance evaluation values for the target supply chains. It is expected that the proposed simulation model will faithfully play a role as a performance evaluation platform in the future for developing management techniques in order to optimally operate the PC supply chain.

• Journal of Korean Association for Spatial Structures
• /
• v.3 no.1 s.7
• /
• pp.77-85
• /
• 2003

This paper presents a truss model that can predict the shear behavior of reinforced concrete (RC) beams subjected to the combined actions of shear and flexure. Unlike other truss models, the proposed truss model, TATM, takes into account the effect of the flexural moment on the shear strength of RC beams with different shear span-to-depth ratios. To check the successfulness of the proposed model experimentally obtained stress shear strain curves were compared to the predicted ones using the proposed truss model. Furthermore, the shear strengths of 170 RC test beams with variable shear span-to-depth ratios were compared to the shear strengths as given by the truss model reported in this paper.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.1107-1111
• /
• 2004

Tilting train improves a traveling velocity through giving a tilt the car-body without ride comfort deterioration in curve. Dynamic behavior in acceleration or deceleration will show quite another feature in constant velocity. In this study, we see through the dynamic behavior due to a variation of tractive force and braking force in Korean Tilting Train. Hence we compose of 3D dynamic model, as well as we check upon the property in service tractive condition and unique tractive condition with a fault motor. Besides we check upon the property in service braking condition and unique braking condition with a fault system. This study has the meaning with reference data of developing Korean Tilting Train test traveling.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.1
• /
• pp.179-192
• /
• 2015

In an automated industry PLC plays a central role to control the automation system. Therefore, fault free operation of PLC controlled automation system is essential in order to maximize a firm's productivity. A prior test of control system is a practical way to check fault operations, but it is a time consuming job and can not check all possible fault operation. A formal verification of PLC program could be a best way to check all possible fault situation. Tracing the history of the study on formal verification, we found three problems, the first is that a formal representation of PLC control system is incomplete, the second is a state explosion problem and the third is that the verification result is difficult to use for the correction of control program. In this paper, we propose a transformation method to reproduce the control system correctly in formal model and efficient procedure to verify and correct the control program using verification result. To demonstrate the proposed method, we provided a suitable case study of an automation system.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.6
• /
• pp.450-459
• /
• 2023

According to Korea Maritime Safety Tribunal, there have been 14,100 maritime accidents from 2017 to 2021. Among those accidents, ship collision accidents have been up to 1,275 cases. But in the accidents relating to small ships like a fishing vessel, analyzing the causes of the accidents would depend on statements of the persons related because there is often no navigational data. But those statements can be incorrect and give rise to disagreements between them so that it causes conflicts with each other during the trial. So a replay system of ship collision accident (RESCA) has been developed in order to reproduce the ship collision accident by using AIS, V-PASS or radar data. But the reproduced trajectory of ship collision accident is needed to be verified because it can be unreasonable physically. So a method to verify the reproduced trajectory and collect the physical data on ship collision accident is newly designed by using free running test. In the RESCA, the accident is reproduced using the navigational data from the trajectory for a ship and measured from free running model test for the other ship at the same time. Through free running test, the behavior of the model ship is transformed from model scale into real scale. In order to check into the accuracy of the new method, free running model tests by using RESCA are carried out on the actual ship collision accidents.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.7
• /
• pp.565-572
• /
• 2021

In this study, a study on the performance and aging of explosive bolts stored for a long time among pyrotechnic mechanical devices(PMD) used as separation devices in the defense field is conducted. For this, explosive bolts that had been installed in the weapon system for about 10 years are secured. Performance and life extension test procedures are established based on the AIAA Standard and MIL-STD. Before performance evaluation, non-functional tests are performed to check whether external changes or failures occurred. Next, circuit inspection and X-ray tests are conducted to check the failure in internal circuits and structures. After that, performance test is carried out to confirm the operation of the samples that passed the non-functional test. Through this test, separation of bolt and separation time are measured, and some samples are tested after a high temperature storage test to confirm the remaining life and the possibility of extension. Finally, the remaining life and reliability are predicted based on the results of the test and the Arrhenius model to identify remaining shelf life and reliability depend on time.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.3
• /
• pp.165-170
• /
• 2021

This paper examines the long-run relationship between financial development and economic growth. The effective function of financial development is crucial to promote the economic development of the country. To achieve the objective, this study used Gross Domestic Product as a dependent variable and Credit to The Private Sector, Ratio of the Gross Fixed Capital Formation to GDP, Trade, Consumer Price Index and Labour Force as an independent variable. Augmented Dickey-Fuller test statistic (ADF) to check the stationary. Bounds test for cointegration and Auto-Regressive Distributed Lag Models (ARDL) are used to check cointegrating relationship amongst the variables and causality between financial development and economic growth. Moreover, the Model selection method is Akaike Info Criterion (AIC). This result demonstrates that the labor force and trade hold a significantly negative relationship with economic growth. Nevertheless, inflation, Credit to The Private Sector, and Ratio of the Gross Fixed Capital Formation to GDP show a significantly positive relationship with economic growth. Therefore, there is a statistically significant relationship between Financial Development and Economic growth in Sri Lanka and the Sri Lankan government should reform its trade policies.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.2162-2167
• /
• 2003

It is well-known that high anisotropic characteristic of turbulent flow field is dominant inside tip leakage vortex. This anisotropic nature of turbulence invalidates the use of the conventional isotropic eddy viscosity turbulence model based on the Boussinesq assumption. In this study, to check whether an anisotropic turbulence model is superior to the isotropic ones or not, the results obtained from steady-state Reynolds averaged Navier-Stokes simulations based on the RNG ${\kappa}-{\varepsilon}$ and the Reynolds stress model in two test cases, such as a linear compressor cascade and a forward-swept axial-flow fan, are compared with experimental data. Through the comparative study of turbulence models, it is clearly shown that the Reynolds stress model, which can express the production term and body-force term induced by system rotation without any modeling, should be used to predict the complex tip leakage flow, including the locus of tip leakage vortex center, quantitatively.