• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.131-134
• /
• 2002

The optimum design technology using combind F.E.M and eauivalent circuit is so fast and accurate that it can be applied to the optimum rotor design of an inverter-fed induction motor in high efficiency motor making industry. The optimum characteristics fer a rotor slot model of a 3 phase inverter-134 nduction motor was previously verified by a time-step F.E.M. In this paper, four verification models with the design variables near the optimum point are designed to chech whether the characteristics of a slot model presented is not less than those of the near models. The outputs of whole models are analyzed in a time-step Finite Element Method and compared in the experimental test. The economical and efficient selecting method of design variables fur the computer simulation and experimental test is presented in order to assure the optimum point.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.5
• /
• pp.589-601
• /
• 1997

A computer simulation program of a high efficiency condensing heat exchanger is developed. The flue gas flows outside bare tube bundles both in strong cross flow and in weak counter flow and the cooling water inside the tubes. Condensing heat exchangers achieve high efficiency by reducing flue-gas temperatures to a level at which most of the water vapor in the flue gas is condensed and the latent heat associated with phase change of the water is recovered. The computer model has been verified by comparison with measured data. To verify the model, heat transfer coefficient was adjusted, along with the mass transfer diffusion coefficient and pressure drop coefficient, to achieve agreement between predicted and measured data. The efficiencies of heat exchanger increase 2.3 ~ 8.1% by condensations of 6.3 ~ 62.6% of the water vapor in the flue gas.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.4 no.1
• /
• pp.1-12
• /
• 1986

An attempt to obtain equipotential surface over the East China Sea along the three SEASAT ground tracks are described. Total correction of sea surface heights above the reference ellipsoid provided by SEASAT GDR Altimeter data consists of ocean tides and surges, body tides, sea level pressure inverse barometer effect corrections for the present study. It was shown that three equipotential surface derived from the corrections were qualitatively in agreement with GEM l0B Model and SS3 Mean Sea Surface Model.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.404-407
• /
• 1995

Magnetic properties of model exchange-spring magnets, which are composed of magnetically soft and hard grains, were calculated by means of computer simulation. The dependence of the magnetic properties on the strength of intergrain exchange interaction and the amount of soft grains was studied. The existence of soft grains enhanced the remanence remarkably, and the remanence over $0.8M_{s}$ was obtained in the model magnets containing 25% or more soft grains by volume. The calculated coercivity vs. the strength of the exchange interaction curves showed a peak at a critical strength of the exchange interaction, although the remanence increased monotonously with increase in the strength of the exchange interaction. Thus the maximum energy product also reached a peak around the same critical strength. The calculated maximum energy product exceeded $300kJ/m^{3}$ when the magnet is assumed to be composed of $Fe_{3}B$ and $Nd_{2}Fe_{14}B$.

• Journal of the Korean Geophysical Society
• /
• v.7 no.4
• /
• pp.277-282
• /
• 2004

Creep deformation of concrete is often responsible for excessive deflection at loads which can compromise the performance of elements within structures. Hence, the prediction of the magnitude and rate of creep strain is an important requirement of the design process and management of structures. Although laboratory tests may be undertaken to determine the deformation properties of concrete, these are time-consuming, often expensive and generally not a practical option. Therefore, relatively simple empirically based national design code models are relied upon to predict the magnitude of creep strain.This paper reviews the accuracy of creep predictions yielded by eight commonly used international "code type" models, all of which do not consider the same material parameters and yield a range of predicted strains, when compared with actual strains measured on a range of concretes in seventeen different investigations. The models assessed are the: SABS 0100 (1992), BS 8110 (1985), ACI 209 (1992), AS 3600 (1998), CEB-FIP (1970, 1978 and 1990) and the RILEM Model B3 (1995). The RILEM Model B3 (1995) and CEB-FIP (1978) were found to be the most and least accurate, respectively.

• Applied Biological Chemistry
• /
• v.48 no.4
• /
• pp.394-399
• /
• 2005

The comparative molecular field analyses (CoMFA) models for the herbicidal activities against barnyardgrass (Echinochloa crus-galli) and rice plant (Orysa sativa L.) by the substituent (R) on the hexahydroisoindol-1-one ring in a series of new 2-(4-chloro-5-(2-chloroallyloxy)-2-fluorophenyl)-3-thioalkoxy-2,3,4,5,6,7-hexahydroisoindol-1-one derivatives were conducted and discussed for selectivity between both plants. The statistical results of the two best models (B2 & R7) showed the best predictability for the herbicidal activities based on the cross-validated value $q_2(r^2cv.=0.529{\sim}0.755)$ and none cross-validated value $({r^2}_{ncv.}=0.937{\sim}0.945)$, respectively. Based on the findings, the predictability and fitness of the model (B2) for barnyard grass was better than that of the model (R7) for rice plant. From the two models and contour maps, it is revealed that the novel selective character for herbicidal activity between the two plants depend on the electrostatic field and steric field for the substituent of ortho-positions on the S-phenyl group as R-substituent in hexahydroisoindol-1-one ring.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4B
• /
• pp.337-346
• /
• 2010

Climate change has a huge impact on various parts of the world. This study quantified and analyzed the effects on hydrological behavior caused by climate, vegetation canopy and land use change of Soyanggang dam watershed (2,694.4 $km^2$) using the semi-distributed model SWAT (Soil Water Assessment Tool). For the 1997-2006 daily dam inflow data, the model was calibrated with the Nash-Sutcliffe model efficiencies between the range of 0.45 and 0.91. For the future climate change projection, three GCMs of MIROC3.2hires, ECHAM5-OM, and HadCM3 were used. The A2, A1B and B1 emission scenarios of IPCC (Intergovernmental Panel on Climate Change) were adopted. The data was corrected for each bias and downscaled by Change Factor (CF) method using 30 years (1977-2006, baseline period) weather data and 20C3M (20th Century Climate Coupled Model). Three periods of data; 2010-2039 (2020s), 2040-2069 (2050s), 2070-2099 (2080s) were prepared for future evaluation. The future annual temperature and precipitation were predicted to change from +2.0 to $+6.3^{\circ}C$ and from -20.4 to 32.3% respectively. Seasonal temperature change increased in all scenarios except for winter period of HadCM3. The precipitation of winter and spring increased while it decreased for summer and fall for all GCMs. Future land use and vegetation canopy condition were predicted by CA-Markov technique and MODIS LAI versus temperature regression respectively. The future hydrological evaluation showed that the annual evapotranspiration increases up to 30.1%, and the groundwater recharge and soil moisture decreases up to 55.4% and 32.4% respectively compared to 2000 condition. Dam inflow was predicted to change from -38.6 to 29.5%. For all scenarios, the fall dam inflow, soil moisture and groundwater recharge were predicted to decrease. The seasonal vapotranspiration was predicted to increase up to 64.2% for all seasons except for HadCM3 winter.

• Journal of Distribution Science
• /
• v.8 no.3
• /
• pp.5-15
• /
• 2010

Business corporations have become specialized and on the basis of various interests try to strengthen their competitiveness through a cooperative system of purchase, distribution, service and IT technology. And an advanced Internet-based electronic commerce has witnessed explosive growth and a business-to-business (B2B) electronic commerce. Through E-marketplace. business corporations achieve such diverse utilities as expenditure curtailment, process reduction and prime cost reduction. And with business depression worldwide and soaring prices of materials, many business corporations consider the introduction of comprehensive purchase of MRO (maintenance, repair and operation) materials. The Purpose of this study was to examine the definition of B2B E-marketplace and the utilities of MRO commerce correctly focusing on an empirical analysis of cases of MRO supply and purchase business corporations. The indications acquired from this research results are as follows. Firstly, as for MRO integrated purchase under the characteristics of the market environment, it had to use the supplier obligatorily through the integrated purchase on the level of CEO's decision-making or the group rather than the voluntary will of the purchasing department or the procurement department. Secondly, as for the present B2B E-marketplace MRO purchase, the purchasing agency business has formed the mainstream, but it is aiming at the diversification of the benefit by supplementing/correcting the business model such as category type, mediation business type, MRO-type advancing in the store inclusive of the purchasing agency business, keeping pace with the potential market of MRO. Thirdly, as for analysis of the products, the purchaser wants more various products and assortment of goods than those of the present time, and also to be provided with the precise product information. Especially, as the importance of the product sourcing becomes high, the whole energy has been bestowed on acquirement of the excellent suppliers. Fourth, as for use of B2B E-marketplace MRO integrated purchasing system, there are the purchasing companies complaining the inconvenience even until now, and there is the demerit spending the long time during the image move and the process treatment. It shall try to shorten the searching time and the process treatment time as the system is centered on the purchaser. In order to enhance the efficiency of MRO E-marketplace purchase, followings must be considered: First, because the importance of product sources ever increases, an excellent supplier must be secured earnestly. Second, the time of process must be reduced focusing on purchasers. B2B E-marketplace will increase and diversify electronic commerce continuously. Through MRO E-marketplace, business corporations will reduce expenditure, achieve a transparent and speedy trade, and purchase products of fine quality, thus establishing a most effective market. In addition, in this study the investigator brings focus into MRO which has not been clearly discussed in the academic and business world so far and intensively highlights an indirect material-oriented expenditure curtailment effect. By taking all the aspects of supplier, purchaser and practical economical value into account, the investigator presents a strategic direction for the successful comprehensive purchase of B2B MRO.

• Journal of Korea Water Resources Association
• /
• v.42 no.1
• /
• pp.33-50
• /
• 2009

The impact on hydrologic components considering future potential climate, land use change and vegetation cover information was assessed using SLURP (Semi-distributed Land-Use Runoff Process) continuous hydrologic model. The model was calibrated (1999 - 2000) and validated (2001 - 2002) for the upstream watershed ($260.4\;km^2$) of Gyeongancheon water level gauging station with the coefficient of determination and Nash-Sutcliffe efficiency ranging from 0.77 to 0.60 and 0.79 to 0.60, respectively. Two GCMs (MIROC3.2hires, ECHAM5-OM) future weather data of high (A2), middle (A1B) and low (B1) emission scenarios of the IPCC (Intergovernmental Panel on Climate Change) were adopted and the data was corrected by 20C3M (20th Century Climate Coupled Model) and downscaled by Change Factor (CF) method using 30 years (1977 - 2006, baseline period) weather data. Three periods data of 2010 - 2039 (2020s), 2040 - 2069 (2050s), 2070 - 2099 (2080s) were prepared. To reduce the uncertainty of land surface conditions, future land use and vegetation canopy prediction were tried by CA-Markov technique and NOAA NDVI-Temperature relationship respectively. MIROC3.2 hires and ECHAM5-OM showed increase tendency in annual streamflow up to 21.4 % for 2080 A1B and 8.9 % for 2050 A1B scenario respectively. The portion of future predicted ET about precipitation increased up to 3 % in MIROC3.2 hires and 16 % in ECHAM5-OM respectively. The future soil moisture content slightly increased compared to 2002 soil moisture.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.2
• /
• pp.116-120
• /
• 2014

3-phase Induction machines are being used in industry and dq transformation from 3 phase of a, b, c is commonly used to analyze these machines. The equivalent circuits of d and q axis are however generally cross coupled and not simple to analyze. In this study, an analysis method of 3ph induction motor considering current regulator using dq transformation and matrix vector is proposed and it can explain the 3ph induction motor physically. This model does not need the separating process of d and q components. With this technique, the model becomes simple, is easy to understand in physical, and can get the same results with those from the other dq models. These simulation results of the proposed model are compared with those of other models for the conformation of the proposed method.