• Title/Summary/Keyword: model B3

Search Result 3,811, Processing Time 0.034 seconds

A Model of Enhancing Biodiversity through Analysis of Landscape Ecology in Seoul Cultivated Area (도시농경지의 경관생태학적 분석을 통한 생물다양성 증진 모델 - 서울시를 대상으로 -)

  • 송인주;진유리
    • Korean Journal of Environment and Ecology
    • /
    • v.16 no.3
    • /
    • pp.249-260
    • /
    • 2002
  • The cultivated lands in metropolitan, such as Seoul, are quasi-natural areas that have been disturbed continuously by human being and is in needs to be preserved and to be managed than to get more crop production in the light of nature experience for civilians through conservation of biodiversity and landscape diversity. However, the cultivated lands in urban areas have decreased rapidly, being changed into developmental areas in its land use. This study is to review change of land use as time change of the cultivated lands in Seoul and to draw the landscape ecological characteristics and structure in the cultivated land after their analysis on the basis of biotope type map in Seoul. The ultimate goal of this study is for development of prototype to enhance biodiversity in urban drypaddy culture area on the results of these analyses.

A Study on the Development of Hydroelastic Experimental Techniques of Very Large Box-shaped Floating Structures with Shallow Draft (천흘수 부유식 해양 구조물의 유탄성 모형시험 기법 개발에 관한 연구)

  • H. Shin;I.K. Park;H.S. Shin;S.K. Kim;Y.S. Yang
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.36 no.4
    • /
    • pp.64-76
    • /
    • 1999
  • In this paper hydroelastic experimental techniques of very large floating offshore structures are suggested based on the model test carried out in the UOU Ocean Engineering Wide Tank. The prototype is a box-shaped floating structure with length of 300m, breadth of 60m, depth of 2m and draft of 0.5m and longitudinal bending rigidity as $4.87{\times}10^{10}kgm^2$. The scale ratio is 1/42.857. The model is realized by aluminum square pipes with the section dimension of $20mm{\times}20mm$. The numbers of longitudinal and transverse pipes are 7 and 35 respectively. Heave motions at selected points are measured with potentiometers and bending moments with strain gages.

  • PDF

A Study on Packet Security of ATM Firewall Switch (ATM 방화벽 스위치 기반의 패킷 보안에 관한 연구)

  • 임청규
    • Journal of the Korea Society of Computer and Information
    • /
    • v.8 no.3
    • /
    • pp.100-106
    • /
    • 2003
  • This paper presents the design of a value-added ATM switch. The ATM switch ca perform CAC Processing and Firewall Processing Routine at packet-level (IP) at the ATM environment per port. The proposed two routine are integrated into the components of ATM switch. The Firewall switch employs a suggested two routine model to avoid or reduce the latency caused by filtering. Also, we suggest four classes are defined. namely, classes A, B, C, and D, which are orded from the safest to the most dangerous. The suggested model performance of ATM Firewall switch is estimated simulation in terms of the throught and latency by computer.

  • PDF

An Experimental Study on the Swirling Flow Field in the Tangentially Fired Furnace (접선식 배치로내의 선회유동장에 관한 실험적 연구)

  • ;;;Yoon, S. H.;Sim, J. K.;Song, H. B.
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.19 no.11
    • /
    • pp.3003-3013
    • /
    • 1995
  • The characteristics of the flow field in the tangentially fired furnace are presented. Experiments are conducted in the simplified cold type isothermal flow model. In the measurement of flow field, a hot wire anemometer is used. The hot wire was calibrated by lookup table method. The mean velocity field and turbulence characteristics are showed with changing the nozzle angle. In the center of the model, the low speed, unstable flow region is formed. The size and position of these regions are varied with changing the nozzle angle. It can be used as fundamental data in the design of the large furnace. From the experimental results, various turbulent characteristics of swirling flow field is obtained. And the entrainment mechanism of the jet flow field is described from the distribution of the skewness and the flatness. It can be used the raw data of approximate calculation and turbulent modelling.

A Study on the Basic-Design of Inside-Sea Fishing Vessel by Economic Optimization Technique (경제성 최적화 기법에 의한 연근해 어선설계에 관한 연구)

  • 박제웅
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.31 no.3
    • /
    • pp.287-295
    • /
    • 1995
  • fishing boat is a specialized vessel which is intended to perform certain well defined tasks. Its size, deck-layout, carrying capacity and equipment are all related to its function in carrying out its planned operations. Therefore the process of fishing boat design is inherently combined with optimization of the design variables called the economic optimization criteria. Optimization then is a process in which minimum value of weight or cost is established through evaluation of consecutive designs in which one or more design parameters are varied. This paper is to study the basic-design of Stow-net fishing vessel in the Mok-Po region. The main task is developed the preliminary design model of engineering economic system in order to use optimization techniques from operation research the design problem needs to be expressed in terms of objective function and numerous constrains like : speed, fish hold capacity, fishing range, displacement and weight, ratio of main dimensions, etc. The objective function represents the criterion which is NPV such as the ratio of revene/cost. When using computers of limited capacity like P/C, the developed basic-design model of the economic optimization procedure must be simplified to V, Cb, L/B, Dv, Db and less than 15 constraint equations. The main conclusions of this study have attempted to show that economic considerations are essential in Stow-net fishing vessel basic design and operations, and that techno-economic evaluation is an important tool for the design of Stow-net fishing vessel in 69ton and 79ton.

  • PDF

Seismic evaluation of different types of electrical cabinets in nuclear power plants considering coupling effects: Experimental and numerical study

  • Md Kamrul Hasan Ikbal;Dong Van Nguyen;Seokchul Kim;Dookie Kim
    • Nuclear Engineering and Technology
    • /
    • v.55 no.9
    • /
    • pp.3472-3484
    • /
    • 2023
  • The objective of this research is to assess the seismic performance of different types of electrical cabinets in nuclear power plants. The cabinets under investigation are: (a) Case 1: a short single cabinet; (b) Case 2: a tall single cabinet; (c) Case 3: separated cabinets; and (d) Case 4: a combined cabinet with coupling effects. To accurately capture the real behavior of the cabinet, three-dimensional finite element models are developed using ANSYS with connection non-linearity. Frequency domain decomposition (FDD) is used to determine the dynamic properties of the cabinets from shaking table testing data, and these results are utilized to validate the numerical model. The close match between the experimental and numerical results obtained from the modal analysis demonstrates the accuracy of the numerical model. Subsequently, transient structural analysis is performed on the validated models to explore seismic performance. The results show that the acceleration response of the combined cabinet is lower than the single cabinet and the separated cabinet. This observation suggests that top anchors used to combine two different types of cabinets play a crucial role in assessing the efficiency and seismic resistance of electrical cabinets in a nuclear power plant.

An Analysis of Early Childhood Teachers' Competency Need for Education for Sustainable Development (ESD) (유아교사의 지속가능발전교육 역량에 대한 요구도 분석)

  • Jungeun An;Yeonhee Kwon
    • Korean Journal of Childcare and Education
    • /
    • v.20 no.3
    • /
    • pp.1-18
    • /
    • 2024
  • Objective: The purpose of this study was to investigate and analyze the needs of early childhood teachers in order to improve their competencies for Education for Sustainable Development (ESD). Methods: Two hundred fifty-four early childhood teachers working in the B area responded to a questionnaire developed by the researcher, assessing the importance and performance of various competencies. The data were analyzed using the Borich demand model and the Locus for Focus model. Results: First, in terms of educational needs by category, the competency to implement ESD was identified as the highest priority, followed by understanding the value of ESD and the economic aspects of ESD content. Second, 17 items were identified as the top priority for educational needs in each detailed item, and 6 items were identified as the next priority. Conclusion/Implications: By directly analyzing the needs of early childhood teachers to improve their competencies for ESD, this study was able to identify the competencies required to enhance ESD for young children. Additionally, it provided a basis for discussing the direction of teacher education for early childhood teachers in the context of ESD.

Studies on Host-Virus Interaction of Poxviruses 1. Cytochemical, Autoradiographic and Immunocytological Analysis in Cowpox Virus-FL Cell System (Poxvirus 감염(感染)에 있어서의 Virus-숙주세포(宿主細胞)의 상호관계(相互關係) 1. Cowpox Virus-FL 세포계(細胞系)의 세포화학적(細胞化學的) Autoradiography 및 세포면역학적해석(細胞免疫學的解析))

  • Kim, Uh Ho
    • Korean Journal of Veterinary Research
    • /
    • v.15 no.1
    • /
    • pp.57-67
    • /
    • 1975
  • The poxvirus group is considered to be a typical cytoplasmic inclusion forming virus. Every poxvirus has been reported to produce only one kind of inclusion in the infected tissues. A vague concept that inclusions of poxviruses are eosinophilic or acidophilic has prevailed. Although many papers and theories about the nature of the inclusion have been presented, most of them are not quite convincing on the point of the relations with virus multiplication, and an analysis of papers published showed that there seem to be many discrepancies in the descriptions of the nature of the poxvirus inclusions. Comparative studies on host-virus interaction with cowpox, orf, swinepox and fowlpox viruses which selected from each Group (I-IV) of poxviruses were performed from the morphological and virological standpoints. At first, in cowpox virus-FL cell system, as a comparative model, cytoplasmic inclusion, nucleic acid metabolism by autoradiography and detection of viral antigen by immunofluorescence were studied and obtained the results as follows: 1. The focus-like cytopathic effect (CPE) at early stage developed to entire culture at terminal stage of infection, and also the developing status of CPE was correlated to viral doses for inoculation. Two kinds of cytoplasmic inclusions which named A and B type were easily observed by Giemsa, hematoxylin-eosin (H & E) and May-Greenwald Giemsa (MGG) stainings in the infected cells. The B type inclusions were formed at early stage of infection and the A type inclusions were produced subsequently the B type formation. The B type which common type inclusion in poxviruses was a small compact or aggregate at early stage and developed to a large diffuse body at terminal stage of infection. On the other hand, the A type inclusion which depend upon the kind of virus was appeared as round and discrete shape, and its size and number was increased gradually during the culture period. It was characteristic to form distinct halos around the both types of inclusions in acid fixed, H & E stained preparations of infected cultures. The B type inclusion was always positive in Feulgen reaction and showed as DNA containing body but the A type inclusion was not. 2. In the relationship between inclusion and DNA metabolism of infected cells by the qualitative autoradiography using 3H-thymidine, the appearance of silver grains was coincided with B type inclusion but not with A type inclusion. This showed that the DNA synthesis was proceeded in all B type inclusions except those in the terminal stage with a diffuse form. This suggested that the B type inclusions are only sites of DNA synthesis and this was proceeded after the cell infection independently. The activity of DNA synthesis of the inclusions was nearly the same as that of the nucleic of normal cells and non-inclusion bearing cells. and non-inclusion bearing cells. Regardless of the size of the degree of DNA synthesis of the B type inclusion, inclusion bearing cells all showed remarkable suppression of nuclear DNA synthesis. 3. By the direct fluorescent antibody technique viral antigen in infected cells was detected. The B type inclusions have been proved to contain a great deal of viral antigen, whereas the basic substance of A type inclusion did not show antigenicity except the round edge. It was suggested that the round edge fluorescence might be caused by the glare of cytoplasmic viral antigen which pushed out and concentrated by the A type inclusion development. 4. Hemorrhagic red pock formations on chorioallantoic membrane of embryonated chicken egg had proved the characteristic of used viral strain. 5. By the above studies on the nature of two types of inclusions and the role they play in virus multiplication, it was concluded that the B type inclusion must be the site of the synthesis of viral DNA and protein as well as the site of the virus.

  • PDF

Estimation of Genetic Variations and Selection of Superior Lines from Diallel Crosses in Layer Chicken (산란계종의 잡종강세 이용을 위한 유전학적 기초연구와 우량교배조합 선발에 관한 연구)

  • 오봉국;한재용;손시환;박태진
    • Korean Journal of Poultry Science
    • /
    • v.13 no.1
    • /
    • pp.1-14
    • /
    • 1986
  • The subject of this study was to obtain some genetic information for developing superior layer chickens. Heterosis and combining ability effects were estimated with 5,759 progenies of full diallel crosses of 6 strains in White Leghorn. Fertility, hatchability, brooder-house viability, rearing- house viability, laying-house viability, age at 1st egg laying, body weight at 1st egg laying, average egg weight, hen-day egg production, hen-housed egg production, and feed conversion were investigated and analyzed into heterosis effect, general combining ability, specific combining ability and reciprocal effect by Grilling's model I. The results obtained were summarized as follows; 1. The general performance of each traits was 94.76% in fertility, 74.05% in hatchability, 97.47% in brooder-house viability, 99.72% in rearing-house viability, 93.81% in laying-house viability, 150 day in the age at 1st egg laying, 1,505g in the body weight at 1st egg laying, 60.08g in average egg weight, 77.11% in hen-day egg production, 269.8 eggs in hen-housed egg Production, and 2.44 in feed conversion. 2. The heterosis effects were estimated to -0.66%, 9.58%, 0.26%, 1.83%, -3.87%, 3.63%, 0.96%, 4.23%, 6.4%, and -0.8%, in fertility, hatchability, brooder-house viability, laying-house viability, the age at 1st egg laying, the body weight at 1st egg laying, average egg weight, hen-day egg Production, hen-housed egg production and feed conversion, respectively. 3. The results obtained from analysis of combining ability were as follows ; 1) Estimates of general combining ability, specific combining ability and reciprocal effects were not high in fertility. It was considered that fertility was mainly affected by environmental factors. In the hatchability, the general combining ability was more important than specific combining ability and reciprocal effects, and the superior strains were K and V which the additive genetic effects were very high. 2) In the brooder-house viability and laying-house viability, specific combining ability and reciprocal effects appeared to be important and the combinations of K${\times}$A and A${\times}$K were very superior. 3) In the feed conversion and average egg weight, general combining ability was more important compared with specific combining ability and reciprocal effects. On the basis of combining ability the superior strains were F, K and B in feed conversion, F and B in the average egg weight. 4) General combining ability, specific combining ability and reciprocal effects were important in the age at 1st egg laying and the combination of V ${\times}$F, F${\times}$K and B${\times}$F were very useful on the basis of these effects. In the body weight at 1st egg laying, general combining ability was more important than specific combining ability and reciprocal effects, relatively. The K, F and E strains were recommended to develop the light strain in the body weight at 1st egg laying. 5) General combining ability, specific combining ability and reciprocal effects were important in the hen-day egg production and hen-housed egg production. The combinations of F${\times}$K, A${\times}$K, and K${\times}$A were proper for developing these traits. 4. In general, high general combining ability effects were estimated for hatchability, body weight at 1st egg laying, average egg weight, hen-day egg production, hen-housed egg production, and feed conversion and high specific combining ability effects for brooder-house viability, laying house viability, age at 1st egg laying, hen-day egg production and hen-housed egg production, and high reciprocal effects for the age at 1st egg laying.

  • PDF

The Development of Predictive Growth Models for Total Viable Cells and Escherichia coli on Chicken Breast as a Function of Temperature

  • Heo, Chan;Kim, Ji-Hyun;Kim, Hyoun-Wook;Lee, Joo-Yeon;Hong, Wan-Soo;Kim, Cheon-Jei;Paik, Hyun-Dong
    • Food Science of Animal Resources
    • /
    • v.30 no.1
    • /
    • pp.49-54
    • /
    • 2010
  • The aim of this research was to estimate the effect of temperature and develop predictive models for the growth of total viable cells (TVC) and Escherichia coli (EC) on chicken breast under aerobic and various temperature conditions. The primary models were determined by Baranyi model. The secondary models for the specific growth rate (SGR) and lag time (LT), as a function of storage temperature, were developed by the polynomial model. The initial contamination level of chicken breasts was around 4.3 Log CFU/g of TVC and 1.0 Log CFU/g of E. coli. During 216 h of storage, SGR of TVC showed 0.05, 0.15, and 0.54 Log CFU/g/h at 5, 15, and $25^{\circ}C$. Also, the growth tendency of EC was similar to those of TVC. As storage temperature increased, the values of SGR of microorganisms increased dramatically and the values of LT decreased inversely. The predicted growth models with experimental data were evaluated by $B_f$, $A_f$, RMSE, and $R^2$. These values indicated that these developed models were reliable to express the growth of TVC and EC on chicken breasts. The temperature changes of distribution and showcase in markets might affect the growth of microorganisms and spoilage of chicken breast mainly.