• Journal of the Korea Convergence Society
• /
• v.10 no.9
• /
• pp.187-192
• /
• 2019

In this study, the structural and fatigue analyses were carried out according to the configuration of rear wheel suspension of torsion beam. Three types of models similar to the actual torsional beam suspension are analyzed and we will find out which one is best on strength. The models of torsion beam suspension were designed in three types of models A, B and C through CATIA program and the results of structural and fatigue analyses were obtained by using the ANSYS program. We will confirm which model is better structurally than other models. According to the analysis results, the deformation happens to be the largest in the middle, and model B has the least deformation compared to model A and C. Similarly, model B is shown to have the smallest result at equivalent stress. So, model B is judged to be the best in terms of its strength, and it is thought to be the most efficient to converge into art design at the suspension design with a torsion beam of rear wheel.

• Restorative Dentistry and Endodontics
• /
• v.19 no.2
• /
• pp.345-371
• /
• 1994

Restorative procedures can lead to weakening tooth due to reduction and alteraton of tooth structure. It is essential to prevent fractures to conserve tooth. Among the several parameters in cavity designs, cavity isthmus and depth are very important. In this study, MO amalgam cavity was prepared on maxillary first premolar. Three dimensional. finite element models were made by serial photographic method and cavity depth(1.7mm, 2.4mm) and isthmus (11 4, 1/3, 1/2 of intercuspal distance) were varied. linear, eight and six-nodal, isoparametric brick elements were used for the three dimensional finite element model. The periodontal ligament and alveolar bone surrounding the tooth were excluded in these models. Three types model(B, G and R model) were developed. B model was assumed perfect bonding between the restoration and cavity wall. Both compressive and tensile forces were distributed directly to the adjacent regions. G model(Gap Distance: 0.000001mm) was assumed the possibility of play at the interface simulated the lack of real bonding between the amalgam and cavity wall (enamel and dentin). When compression occurred along the interface, the forces were transferred to the adjacent regions. However, tensile forces perpendicular to the interface were excluded. R model was assumed non-connection between the restoration and cavity wall. No force was transferred to the adjacent regions. A load of 500N was applied vertically at the first node from the lingual slope of the buccal cusp tip. This study analysed the displacement, von Mises stress, 1 and 2 direction normal stress and strain with FEM software ABAQUS Version 5.2 and hardware IRIS 4D/310 VGX Work-station. The results were as follows: 1. G model showed stress and strain patterns between Band R model. 2. B model and G model showed the bending phenomenon in the displacement. 3. R model showed the greatest amount of the displacement of the buccal cusp followed by G and B model in descending order. G model showed the greatest amount of the displacement of the lingual cusp followed by B and R model in descending order. 4. B model showed no change of the displacement as increasing depth and width of the cavity. G and R model showed greater displacement of the buccal cusp as increasing depth and width of the cavity, but no change in the displacement of the lingual cusp. 5. As increasing of the width of the cavity, stress and strain were not changed in B model. Stress and strain were increased on the distal marginal ridge and buccopulpal line angle in G and R model. The possibility of the tooth fracture was increased. 6. As increasing of the depth of the cavity, stress and strain were not changed in B and G model. Stress and strain were increased on the distal marginal ridge and buccopulpal line angle in R model. The possibility of the tooth fracture was increased.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.3 s.35
• /
• pp.275-286
• /
• 2005

Interest of Business Model has been increased continuously in the enterprise ever since IT(Information Technology) is introduced in the Business sector. Though lots of company's effort to build Business Model which expected to give profit to company, there are no guarantee of Business Model's success. In the situation of shortest lifecycle of new technology, it's hard to guarantee Business Model based new technology will return profit with the result of excellent evaluation of technology. After find Timmers model, Julta model, Rappa model, Electronic Commerce Profit model, B2E Model and Affliation, Affliated B2E Business Frame, will propose advantage and disadvantage of these models. Comraded B2E Business Model will be extracted for Mobile Solution Company to achieve success in the market through analysis of relationship between Technology appraisal and business model.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.33 no.2
• /
• pp.51-60
• /
• 1991

The main objective of this study is to examine the adaptability for the large watershed of the storage tank model which can be applied for the analysis of both long and short terms runoff developed on the basis of hydrologic data for a smaH mountaineous watershed. The results obtained in this study are summarized as follows ; 1. Areal rainfalls of the Dae Chong watershed were calculated by Thiessen method composed of 9 Thiessen networks. 2. Optimal parameters for two types, Model A and Model B of tank models were derived through calibration procedure by standardized Powell method. 3. Monthly simulated flows of Model B are seemed to be closer to the monthly observed than those of Model A during calibration period in the long terms runoff. 4. Relative errors for the simulated flood flows of Model B were apperaed as lower percentage to the observed than those of Model A during calibration period in the short terms runoff. 5. Daily simulated hydrographs of Model B are seemed to be closer to the daily observed than those of Model A during verification period in the long terms runoff. Significance of Model B was highly acknowledged in comparison with Model A in the correlation analysis between annual observed and annual simulated runoff. 6. Reproducibility of simulated flows for Model B is generally seemed to be better than that of Model A during calibration period in the short terms runoff. 7. It can be concluded that reproducibility of Model B is superior to that of Model A in the long and short terms runoff even a large watershed like the result of the small one. 8. It was verified that adaptability for the large watershed of Model B is superior to that of Model A between the two models which were developed by a small watershed characteristics for both long and short terms runoff. 9. Further study for getting a suitable tank model is desirable to be established by the decision, calibration method of initial parameters of tank model and by additional application of another watershed with different watersheds and meterological characteristics.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.655-669
• /
• 1995

Restorative procedures can lead to weakening tooth due to reduction and alteration of tooth structure. It is essential to prevent fractures to conserve tooth. Among the several parameters in cavity designs, cavity isthmus is very important. In this study, amalgam 0 cavity was prepared on maxillary first premolar. Two dimensional finite element models were made by serial photographic method and isthmus(1/4, 1/3, 1/2, 2/3 of intercuspal distance) were varied. Three or four-nodal mesh were used for the two dimensional finite element models. The periodontal ligament and alveolar bone surrounding the tooth were excluded in these models. 1S model was sound tooth with no amalgam cavity. B model was assumed perfect bonding between the restoration and cavity wall. Both compressive and tensile forces were distributed directly to the adjacent regions. A load of 500N was applied vertically at the first node from the lingual slope of the buccal cusp tip. This study analysed von Mises stress, 1 and 2 directional normal stress and Y and Z axis translation with FEM software Super SAPII Version 5.2 (Algor Interactive System Co.) and hardware 486 DX2 PC. The results were as :follows : 1. 1S model was slightly different with 1B model in stress distibution. 1S, 2B, 3B, 4B models showed similiar stress distribution. 2. 1S model and four B models showed similiar pattern in Y axis and Z axis translation. 3. 1S model and four B models showed the bending phenomenon in the translation. 4. As increasing of the width of the cavity, experimental group was similiar with the control group in stress distribution. 5. As increasing of the width of the cavity, experimental group was similiar with the control group in Y and Z axis tranlation.

• Proceedings of the Korean Society of Food Science and Nutrition Conference
• /
• 2004.11a
• /
• pp.116-121
• /
• 2004

To observe the intervening effect of resveratrol on coxsackie virus B3m-induced myocarditis in Balb/c mice and explore the mechanism of intervening effect. Using an animal model of viral myocarditis induced by coxsackie virus B3m (CVB3m), with Ribavirin and Astragalan as comparison, to examine the changes of general condition, mortality, the weights of heart, liver and spleen, serum MDA and NO levels, and cardiac histology in Balb/c mice. By comparison with Ribavirin and Astragalan, it was found that in the mice model of viral myocarditis induced by coxsackie virus B3m resveratrol significantly improved the changes of general condition, mortality, the weights of heart, liver and spleen, serum MDA and NO levels, and cardiac histology. It suggested that resveratrol may have some chemopreventive and chemotherapeutic effects in the treatment of viral myocarditis.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2002.11a
• /
• pp.98-98
• /
• 2002

In higher dicotyledonous plants, the floral organs are arranged in four different whorls, containing sepals, stamens and carpels. petals, stamens and carpels. The specification of floral organ identity is explained by the ABC model (Weigel and Meyerowitz 1994). expression of an A-function gene specifies sepal formation in whorl 1. the combination of A-and B-function genes specifies the formation of petals in whorl 2, B-and C-function genes spesify stamen formation in whorl 3, and expression of the C-function alone determines the formation of carpels in whorl 1. A-, B-, C-function genes have been isolated from many plant species and most of them belong to the family of MADS-box genes encoding transcription factor. In contrast to the flower of higher dicots, the perianths of genseng plants have three whorls of almost identical petaloid organs. van Tunen et al. (1993) proposed a modified ABC model, exemplified with tulip. In this model, B-function genes are expressed in whorl 1 as well as whorl 2 and 3, theefore the organs of whorl 1 and whorl 2 have the same petaloid structure. They proposed this model with the molphological data of wild type and mutant flowers of tulip, however, there are no molecular data. To date, B-function genes were isolated several grass plants, rice, wheat and maize. However, grass plants have highly derived flowers, without well-developed perianths. To find out how the ABC model has to be modified for the Genseng plants, we have cloned and characterized orthologs of A-, B-, C-function genes from genseng.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.6
• /
• pp.707-716
• /
• 2020

Objective : The function of B7H3, a member of the B7 family of proteins, in neuroblastoma (NB) remains poorly characterized. Here we examine the expression pattern of B7H3 in clinical NB specimens and characterize the phenotype of B7H3 knock-down in NB cell line. Methods : Immunohistochemical (IHC) staining was carried out to assess the expression of B7H3 in clinical NB specimens. Survival association was analyzed using five Gene Expression Omnibus (GEO) datasets (GSE85047, GSE45480, GSE62564, GSE16476, GSE49710). Clonogenic survival and flow cytometry were performed after B7H3 knockdown to assess the cellular proliferation and cell survival in vitro. Impact of B7H3 silencing on NB growth was examined in vivo using the SH-SY5Y xenograft model. Results : On IHC staining, B7H3 was widely expressed in clinical NB specimens. Analysis of the transcriptional profiles of five GEO datasets clinically annotated NB specimens revealed that decreased B7H3 expression was associated with improved overall survival. B7H3 knockdown suppressed the proliferation of the SH-SY5Y NB model in vitro and in vivo. Cell cycle analysis revealed that B7H3 silencing induced G1/S arrest. This arrest was associated with the suppression of E2F1 expression and induction of Rb expression. Conclusion : Our results demonstrate that B7H3 expression correlate with clinical survival in NB patients. Preliminary studies suggest that B7H3 may mediate the G1/S transition.

• Journal of The Korean Astronomical Society
• /
• v.25 no.1
• /
• pp.11-21
• /
• 1992

Applying mass model to disk galaxy NGC 300, since the observed rotation curve of NGC 300 is flatter than Toomre's mass model n = 1, two cases are used; obtaining parameters $a^n$ and $b^n$ from the polynomial fitting of the observed rotation curve (case A) and from the least square fitting between the observed rotation curve and model rotation curve (case B). In any case, n bas a fixed value of 1. Brandt's mass model is also discussed. which has a shape parameter n = 1.4. Calculated total mass and total mass to luminosity ratio are $3.3{\times}10^{10}M_{\odot}$, l2.1 for case A and $2.8{\times}10^{10}M_{\odot}$, 10.3 for case B. In case of Brandt's model, the values are $4.2{\times}10^{10}M_{\odot}$ and 15.4. The rise in the local mass to luminosity ratio in the outer part of NGC 300 implies existence of massive halo. Other dynamical properties are also discussed.

• International Commerce and Information Review
• /
• v.9 no.3
• /
• pp.161-180
• /
• 2007

The electronic bill of lading system replacing with traditional paper B/L has been evolved from SeaDocs and CMI to Bolero system. Therefore e-B/L is considered as an evolving concept rather than fixed one because it has been changed with development of information technology. Bolero system designed to replicate all functions of a paper B/L has some limitation to be utilized as an e-B/L in changing international business arena because it has a centralized model. Therefore it is considered to be important that the current e-B/L operating system needs to be diversified. This paper aims to provide three types of the operating model of global e-B/L to be applied with feasible solution coping with the current problems, which is expected to contribute to the utilization of electronic bill of lading.