• Journal of the Korean Society for Advanced Composite Structures
• /
• v.3 no.4
• /
• pp.1-9
• /
• 2012

Dynamic application lower mode response is of interest, however the higher modes of spatially discretized equations generally do not represent the real behavior. Some implicit algorithms, therefore, are introduced to filter out the high-frequency modes. The objective of this study is to introduce the P-method and PC ${\alpha}$-method to compare that with dissipation method and Newmark method through the stability analysis and numerical example. PC ${\alpha}$-method gives more accuracy than other methods because it based on the ${\alpha}$-method inherits the superior properties of the implicit ${\alpha}$-method. In finite element analysis, the PC ${\alpha}$-method is more useful than other methods because it is the explicit scheme and it achieve the second order accuracy and numerical damping simultaneously.

• Transactions of Materials Processing
• /
• v.18 no.5
• /
• pp.385-391
• /
• 2009

An adhesively bonded power steering cylinder with a steel tube and an aluminum bracket was developed to reduce the weight of steering systems. To achieve the joint strength between the steel tube and of the aluminum bracket, the shape aluminum bracket re-designed by using the FE-analysis. Fracture behavior of the adhesive layer was considered by a cohesive zone model(CZM), which is based on the two-parameter fracture phenomenon with critical stress and fracture toughness. From the result of FE-analysis with CZM, re-designed power steering cylinder satisfied the desired joint strength for axial and torsion modes. And its joint strength was verified by the fracture test in each mode.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.83-88
• /
• 2013

The purpose of this study is to develop the algorithm for dynamic interaction analysis of submerged floating tunnel and vehicles. The dynamic behavior characteristic of submerged floating tunnel is certainly different with general structures, because the submerged floating tunnel is floating in the middle of water, and subjected to constant buoyance. Therefore the analyses in various aspects should be carried out to secure structural stability and practicality of structures. To conduct the dynamic interaction analysis, the structure is modeled by commercial FEM program ABAQUS to investigate modal characteristic. Also the added mass concept is applied to represent the inertial force by a fluid, and then dynamic interaction analyses are conducted with superposition method when the KTX is moving along the submerged floating tunnel. And the time histories are presented for vertical and lateral displacement at the center of the tunnel.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.90-95
• /
• 2000

This study is to choose the most proper model for AGV throughout simulation of behavior of suspension to reduce trial and error because there is no AGV treating heavy weight at harbor loading and unloading at home. Therefore, we estimate the vibration modes of the various suspension applied to AGV, which is over 75 ton included the weight of two containers on 5G using the Matlab, one of the simulation programs

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.6
• /
• pp.65-75
• /
• 2001

Modern vehicles require a high degree of refinement including good driveability. Vehicle driveability, which becomes a key decisive factor f3r marketability, is affected by many parameters such as engine control and the dynamic characteristics in drive lines. Therefore engine and drive train characteristics should be considered to achieve a well balanced vehicle response simultaneously. This paper describes experimental procedures which have been developed to measure engine torque and investigate shuffle characteristics. To analyze the vehicle dynamic behavior, fractional torques and inertia mass moment of engine, and drive train were measured. Shuffle characteristics during tip-in condition were investigated in an experimental vehicle at 2nd and 3rd gear stages. It was found that the shuffle characteristics were caused by sudden changes of engine torque and have a different vibration frequency with gear stage variation. Inertia mass moment of engine including flywheel rotation showed a key factor for the shuffle characteristics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.480-486
• /
• 2008

The pipe elbows subjected to in-plane bending moments are analyzed with the finite element method. The results from the finite element analysis are compared with ASME code equations that are theoretical closed form solutions. The geometric nonlinear effects due to the ovalization are explained with the magnitude and the types of the stresses and the flexibilities of the elbows with the emphasis on the bend angles and elbow factors.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.3
• /
• pp.150-156
• /
• 1998

In this paper, a 3-DOF(Degree Of Freedom) rigid body model is developed for dynamic analysis of a hydrostatic table. The dynamic coefficients, stiffness and damping constant of each pad are calculated from the mass flow continuity condition. The validity of this model is examined in theoretical and experimental method. The dynamic behavior when mass unbalances and local variations of stiffness and damping of pads present is analyzed for real applications of hydrostatic table. Since the theoretical and experimental results show goof agreement. it can be said that the 3-DOF rigid body model is useful for the dynamic model of the table. The analysis reveals that the pitching motion is the dominant mode of vibration, It also reveals that unbalanced loads can increase amplitude of tilting motion and reduce natural frequencies and damping capacity of the hydrostatic table.

• Journal of Korean Society of Transportation
• /
• v.14 no.4
• /
• pp.31-48
• /
• 1996

This paper develops a disaggregate model system for travel behavior of workers in a metropolitan area. We attempt to develop a set of models for predicting trip generation type, trip purpose, destination, mode choices in each trip on the way from work to home by using the concept of utility maximization of base-to-base tour. The model incorporates the concept that decisions of a trip in a trip in a travel tour depend on decisions of the trips having been made before and decisions of trip planned after of this trip, as well as on current trip conditions. As the structure of the model, the nested logit model is used to avoid a simultaneous model's complexity. The data to be used for estimating the model system are from the person trip survey which was carried out in 1981 in Nagoya metropolitan. Empirical tests of the model for Nagoya metropolitan area show encouraging results and prove the validity of the assumption of this model.

• Proceedings of the KOR-KST Conference
• /
• 1998.10a
• /
• pp.83-92
• /
• 1998

서울과 일산 신도시의 출근통행 교통수단 선택모형을 구축하고, 두 도시간 수단선택행태를 분석.비교하였다. 분석을 위한 자료로는 1996년 서울시에서 수행한 가구통행실태조사자료를 이용하였으며, 수단선택모형으로는 다항로짓모형을 사용하였다. 두 지역 출근통행 수단선택모형의 모형구조상의 차이 및 모형의 지역간 이전가능성을 분석하였고, 출근통행의 시간가치 및 탄력성을 분석하고 비교하였다. 통계적 검증의 결과 출근통행의 수단선택에 있어서, 모형구조적 측면에서나 선택행태적 측면에서 수단 선택모형의 두 도시간 이전은 불가능한 것으로 나타났다. 서울의 출근통행의 시간가치가 일산보다 전반적으로 큰 것으로 분석되었고, 특히 서울의 경우, 택시이용자의 시간가치가 자가용 이용자의 시간가치보다 큰 것으로 나타났다. 두 도시 모두 통행시간에 대한 탄력성 통행비용에 대한 탄력성보다 전반적으로 크며, 버스와 지하철간의 통행시간에 대한 교차탄력성이 매우 높은 것으로 분석되었다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.330-331
• /
• 2005

It was found possible to evaluate the temperature at which major scale failure takes place during cooling by installing a most modem acoustic emission(AE) analytical system. Ultra low carbon steel and low carbon steels containing a few minor alloying elements were oxidized in air at 900, 1050 and $1200^{\circ}C$ for 20 min, and then cooled in vacuum at 30, 70 and $110^{\circ}C/min$. The significance of the present research is the evaluation of the spallation temperature and thus the calculation of apparent thermal stress for scale spallation using the difference between oxidation temperature and spallation temperature. They were assessed as 0.22 to 0.68, 0.45 to 1.80, and 0.65 to 1.95 GPa for oxidation at 900, 1050 and $1200^{\circ}C$, respectively.